pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.

Signed-off-by: Balaji T K <balaj...@ti.com>
---
 .../bindings/regulator/pbias-regulator.txt         |   21 ++
 drivers/regulator/Kconfig                          |    7 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/pbias-regulator.c                |  264 ++++++++++++++++++++
 4 files changed, 293 insertions(+), 0 deletions(-)
 create mode 100644 
Documentation/devicetree/bindings/regulator/pbias-regulator.txt
 create mode 100644 drivers/regulator/pbias-regulator.c

diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt 
b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 0000000..712fcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,21 @@
+PBIAS internal regulator for SD card i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - "regulator-pbias-omap2" for OMAP2
+  - "regulator-pbias-omap3" for OMAP3
+  - "regulator-pbias-omap4" for OMAP4
+  - "regulator-pbias-omap5" for OMAP5, DRA7
+- pbias-reg-offset: PBIAS control register offset from syscon base address
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+               pbias_regulator: pbias_regulator {
+                       pbias-reg-offset = <0>;
+                       regulator-name = "pbias_regulator";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3000000>;
+       };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ce785f4..3177f45 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -369,6 +369,13 @@ config REGULATOR_PALMAS
          on the muxing. This is handled automatically in the driver by
          reading the mux info from OTP.
 
+config REGULATOR_PBIAS
+       tristate "PBIAS OMAP regulator driver"
+       depends on ARCH_OMAP && MFD_SYSCON
+       help
+        This driver provides support for OMAP pbias modelled
+        regulators.
+
 config REGULATOR_PCAP
        tristate "Motorola PCAP2 regulator driver"
        depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 01c597e..16000fa 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  
mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
diff --git a/drivers/regulator/pbias-regulator.c 
b/drivers/regulator/pbias-regulator.c
new file mode 100644
index 0000000..48fda88
--- /dev/null
+++ b/drivers/regulator/pbias-regulator.c
@@ -0,0 +1,264 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balaj...@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_bit_map {
+       u32 enable;
+       u32 enable_mask;
+       u32 vmode;
+};
+
+struct pbias_regulator_data {
+       struct regulator_desc desc;
+       void __iomem *pbias_addr;
+       unsigned int pbias_reg;
+       struct regulator_dev *dev;
+       struct regmap *syscon;
+
+
+       const struct pbias_bit_map *bmap;
+       int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+                       int min_uV, int max_uV, unsigned *selector)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+       const struct pbias_bit_map *bmap = data->bmap;
+       int ret, vmode;
+
+       if (min_uV <= 1800000)
+               vmode = 0;
+       else if (min_uV > 1800000)
+               vmode = bmap->vmode;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                               bmap->vmode, vmode);
+       data->voltage = min_uV;
+
+       return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+
+       return data->voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_bit_map *bmap = data->bmap;
+       int ret;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                       bmap->enable_mask, bmap->enable);
+
+       return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_bit_map *bmap = data->bmap;
+       int ret;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                               bmap->enable_mask, 0);
+       return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_bit_map *bmap = data->bmap;
+       int value;
+
+       regmap_read(data->syscon, data->pbias_reg, &value);
+
+       return value & bmap->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+       .set_voltage    = pbias_regulator_set_voltage,
+       .get_voltage    = pbias_regulator_get_voltage,
+       .enable         = pbias_regulator_enable,
+       .disable        = pbias_regulator_disable,
+       .is_enabled     = pbias_regulator_is_enable,
+};
+
+#if CONFIG_OF
+static const struct pbias_bit_map pbias_omap3 = {
+       .enable = BIT(1),
+       .enable_mask = BIT(1),
+       .vmode = BIT(0),
+};
+
+static const struct pbias_bit_map pbias_omap4 = {
+       .enable = BIT(26) | BIT(22),
+       .enable_mask = BIT(26) | BIT(25) | BIT(22),
+       .vmode = BIT(21),
+};
+
+static const struct pbias_bit_map pbias_omap5 = {
+       .enable = BIT(27) | BIT(26),
+       .enable_mask = BIT(27) | BIT(25) | BIT(26),
+       .vmode = BIT(21),
+};
+
+static const struct of_device_id pbias_of_match[] = {
+       { .compatible = "regulator-pbias-omap3", .data = &pbias_omap3},
+       { .compatible = "regulator-pbias-omap4", .data = &pbias_omap4},
+       { .compatible = "regulator-pbias-omap5", .data = &pbias_omap5},
+       {},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+#endif
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       struct device_node *syscon_np;
+       struct pbias_regulator_data *drvdata;
+       const struct of_device_id *id;
+       const char *supply_name;
+       struct regulator_init_data *initdata;
+       struct regulator_config cfg = { };
+       unsigned startup_delay;
+       int ret;
+
+       drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data),
+                              GFP_KERNEL);
+       if (drvdata == NULL) {
+               dev_err(&pdev->dev, "Failed to allocate device data\n");
+               return -ENOMEM;
+       }
+
+       id = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
+       if (!id)
+               return -ENODEV;
+
+       drvdata->bmap = id->data;
+       if (!drvdata->bmap)
+               return -ENODEV;
+
+       initdata = of_get_regulator_init_data(&pdev->dev, np);
+       if (!initdata)
+               return -EINVAL;
+
+       supply_name = initdata->constraints.name;
+
+       of_property_read_u32(np, "startup-delay-us", &startup_delay);
+       ret = of_property_read_u32(np, "pbias-reg-offset",
+                                  &drvdata->pbias_reg);
+       if (ret) {
+               dev_err(&pdev->dev, "no pbias-reg-offset property set\n");
+               return ret;
+       }
+
+       syscon_np = of_get_parent(np);
+       if (!syscon_np)
+               return -ENODEV;
+
+       drvdata->syscon = syscon_node_to_regmap(syscon_np);
+       of_node_put(syscon_np);
+       if (IS_ERR(drvdata->syscon))
+               return PTR_ERR(drvdata->syscon);
+
+       drvdata->desc.name = kstrdup(supply_name, GFP_KERNEL);
+       if (drvdata->desc.name == NULL) {
+               dev_err(&pdev->dev, "Failed to allocate supply name\n");
+               return -ENOMEM;
+       }
+
+       drvdata->desc.owner = THIS_MODULE;
+       drvdata->desc.enable_time = startup_delay;
+       drvdata->desc.type = REGULATOR_VOLTAGE;
+       drvdata->desc.ops = &pbias_regulator_voltage_ops;
+       drvdata->desc.n_voltages = 3;
+
+       cfg.dev = &pdev->dev;
+       cfg.init_data = initdata;
+       cfg.driver_data = drvdata;
+       cfg.of_node = np;
+
+       drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
+                                                                       &cfg);
+       if (IS_ERR(drvdata->dev)) {
+               ret = PTR_ERR(drvdata->dev);
+               dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+               goto err_regulator;
+       }
+
+       platform_set_drvdata(pdev, drvdata);
+
+       return 0;
+
+err_regulator:
+       kfree(drvdata->desc.name);
+       return ret;
+}
+
+static int pbias_regulator_remove(struct platform_device *pdev)
+{
+       struct pbias_regulator_data *drvdata = platform_get_drvdata(pdev);
+
+       kfree(drvdata->desc.name);
+
+       return 0;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+       .probe          = pbias_regulator_probe,
+       .remove         = pbias_regulator_remove,
+       .driver         = {
+               .name           = "pbias-regulator",
+               .owner          = THIS_MODULE,
+               .of_match_table = of_match_ptr(pbias_of_match),
+       },
+};
+
+static int __init pbias_regulator_init(void)
+{
+       return platform_driver_register(&pbias_regulator_driver);
+}
+subsys_initcall(pbias_regulator_init);
+
+static void __exit pbias_regulator_exit(void)
+{
+       platform_driver_unregister(&pbias_regulator_driver);
+}
+module_exit(pbias_regulator_exit);
+
+MODULE_AUTHOR("Balaji T K <balaj...@ti.com>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to