On Tue, Nov 12, 2013 at 08:46:48PM +0100, Arnaud Ebalard wrote: > > All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS > 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports, > USB 2.0 front port, Gigabit controller and PHYs for the two rear ports, > serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan > controllers, G751 temperature sensor) except for: > > - the Intersil ISL12057 I2C RTC Chip, > - the Armada NAND controller. > > Support for both of those is currently work in progress and does not > prevent boot. > > Acked-by: Sebastian Hesselbarth <[email protected]> > Signed-off-by: Arnaud Ebalard <[email protected]> > --- ... > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 288 > +++++++++++++++++++++++++ > 2 files changed, 289 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
Applied to mvebu/dt thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
