Add Freescale Vybrid vf610 adc driver. The driver only support
ADC software trigger.
Signed-off-by: Fugang Duan <b38...@freescale.com>
---
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/vf610_adc.c | 744 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 756 insertions(+), 0 deletions(-)
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2209f28..d0476ec 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -204,4 +204,15 @@ config VIPERBOARD_ADC
Say yes here to access the ADC part of the Nano River
Technologies Viperboard.
+config VF610_ADC
+ tristate "Freescale vf610 ADC driver"
+ help
+ Say yes here if you want support for the Vybrid board
+ analog-to-digital converter.
+ Since the IP is used for i.MX6SLX and i.MX7 serial sillicons, the
driver
+ also support the subsequent chips.
+
+ This driver can also be built as a module. If so, the module will be
+ called vf610_adc.
+
endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ba9a10a..c39ae38 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
+obj-$(CONFIG_VF610_ADC) += vf610_adc.o
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
new file mode 100644
index 0000000..0c200d91
--- /dev/null
+++ b/drivers/iio/adc/vf610_adc.c
@@ -0,0 +1,744 @@
+/*
+ * Freescale Vybrid vf610 ADC driver
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "vf610-adc"
+
+/* Vybrid/IMX ADC registers */
+#define ADC_HC0 0x00
+#define ADC_HC1 0x04
+#define ADC_HS 0x08
+#define ADC_R0 0x0c
+#define ADC_R1 0x10
+#define ADC_CFG 0x14
+#define ADC_GC 0x18
+#define ADC_GS 0x1c
+#define ADC_CV 0x20
+#define ADC_OFS 0x24
+#define ADC_CAL 0x28
+#define ADC_PCTL 0x30
+
+/* Configuration register field define */
+#define VF610_ADC_MODE_BIT8 0x00
+#define VF610_ADC_MODE_BIT10 0x04
+#define VF610_ADC_MODE_BIT12 0x08
+#define VF610_ADC_DATA_BIT8_MASK 0xFF
+#define VF610_ADC_DATA_BIT10_MASK 0x3FF
+#define VF610_ADC_DATA_BIT12_MASK 0xFFF
+#define VF610_ADC_BUSCLK2_SEL 0x01
+#define VF610_ADC_ALTCLK_SEL 0x02
+#define VF610_ADC_ADACK_SEL 0x03
+#define VF610_ADC_CLK_DIV2 0x20
+#define VF610_ADC_CLK_DIV4 0x40
+#define VF610_ADC_CLK_DIV8 0x60
+#define VF610_ADC_ADLSMP_LONG 0x10
+#define VF610_ADC_ADSTS_SHORT 0x100
+#define VF610_ADC_ADSTS_NORMAL 0x200
+#define VF610_ADC_ADSTS_LONG 0x300
+#define VF610_ADC_ADLPC_EN 0x80
+#define VF610_ADC_ADHSC_EN 0x400
+#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VBG 0x1000
+#define VF610_ADC_ADTRG_HARD 0x2000
+#define VF610_ADC_AVGS_8 0x4000
+#define VF610_ADC_AVGS_16 0x8000
+#define VF610_ADC_AVGS_32 0xC000
+#define VF610_ADC_OVWREN 0x10000
+
+/* General control register field define */
+#define VF610_ADC_ADACKEN 0x1
+#define VF610_ADC_DMAEN 0x2
+#define VF610_ADC_ACREN 0x4
+#define VF610_ADC_ACFGT 0x8
+#define VF610_ADC_ACFE 0x10
+#define VF610_ADC_AVGEN 0x20
+#define VF610_ADC_ADCON 0x40
+#define VF610_ADC_CAL 0x80
+
+/* Other field define */
+#define VF610_ADC_IOPCTL5 0x20
+#define VF610_ADC_ADCHC(x) ((x) & 0xF)
+#define VF610_ADC_AIEN (1 << 7)
+#define VF610_ADC_CONV_DISABLE 0x1F
+#define VF610_ADC_HS_COCO0 0x1
+#define VF610_ADC_CALF 0x2
+#define VF610_ADC_MAX_CHANS_NUM 16
+#define VF610_ADC_TIMEOUT (msecs_to_jiffies(100))
+
+enum clk_sel {
+ ADCIOC_BUSCLK_SET,
+ ADCIOC_ALTCLK_SET,
+ ADCIOC_ADACK_SET,
+};
+
+enum vol_ref {
+ VF610_ADCIOC_VR_VREF_SET,
+ VF610_ADCIOC_VR_VALT_SET,
+ VF610_ADCIOC_VR_VBG_SET,
+};
+
+struct vf610_adc_feature {
+ enum clk_sel clk_sel;
+ enum vol_ref vol_ref;
+
+ int pctl;
+ int clk_div_num;
+ int res_mode;
+ int sam_time;
+ int hw_sam;
+
+ bool calibration;
+ bool cc_en;
+ bool dataov_en;
+ bool hw_average;
+ bool tri_hw;
+ bool hs_oper;
+ bool lpm;
+ bool dma_en;
+ bool ac_clk_en;
+ bool cmp_func_en;
+ bool cmp_range_en;
+ bool cmp_greater_en;
+};
+
+struct vf610_adc {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+ unsigned int irq;
+
+ u32 vref_uv;
+ u32 value;
+ struct regulator *vref;
+ struct vf610_adc_feature adc_feature;
+
+ struct completion completion;
+};
+
+#define VF610_ADC_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .indexed = 1, \
+ .channel = _idx, \
+ .address = _idx, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec vf610_adc_iio_channels[] = {
+ VF610_ADC_CHAN(0, IIO_VOLTAGE),
+ VF610_ADC_CHAN(1, IIO_VOLTAGE),
+ VF610_ADC_CHAN(2, IIO_VOLTAGE),
+ VF610_ADC_CHAN(3, IIO_VOLTAGE),
+ VF610_ADC_CHAN(4, IIO_VOLTAGE),
+ VF610_ADC_CHAN(5, IIO_VOLTAGE),
+ VF610_ADC_CHAN(6, IIO_VOLTAGE),
+ VF610_ADC_CHAN(7, IIO_VOLTAGE),
+ VF610_ADC_CHAN(8, IIO_VOLTAGE),
+ VF610_ADC_CHAN(9, IIO_VOLTAGE),
+ VF610_ADC_CHAN(10, IIO_VOLTAGE),
+ VF610_ADC_CHAN(11, IIO_VOLTAGE),
+ VF610_ADC_CHAN(12, IIO_VOLTAGE),
+ VF610_ADC_CHAN(13, IIO_VOLTAGE),
+ VF610_ADC_CHAN(14, IIO_VOLTAGE),
+ VF610_ADC_CHAN(15, IIO_VOLTAGE),
+};
+
+static void vf610_adc_cfg_of_init(struct vf610_adc *info)
+{
+ struct device_node *np = info->dev->of_node;
+
+ /*
+ * set default Configuration for ADC controller
+ * This config may upgrade to require from DT
+ */
+ info->adc_feature.clk_sel = ADCIOC_BUSCLK_SET;
+ info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET;
+ info->adc_feature.calibration = true;
+ info->adc_feature.tri_hw = false;
+ info->adc_feature.dataov_en = true;
+ info->adc_feature.ac_clk_en = false;
+ info->adc_feature.dma_en = false;
+ info->adc_feature.cc_en = false;
+ info->adc_feature.cmp_func_en = false;
+ info->adc_feature.cmp_range_en = false;
+ info->adc_feature.cmp_greater_en = false;
+
+ if (of_property_read_u32(np, "fsl,adc-io-pinctl",
+ &info->adc_feature.pctl)) {
+ info->adc_feature.pctl = VF610_ADC_IOPCTL5;
+ dev_info(info->dev,
+ "Miss adc-io-pinctl in dt, enable pin SE5.\n");
+ }
+
+ if (info->vref)
+ info->vref_uv = regulator_get_voltage(info->vref);
+ else if (of_property_read_u32(np, "fsl,adc-vref", &info->vref_uv))
+ dev_err(info->dev,
+ "Miss adc-vref property or vref regulator in the
DT.\n");
+
+ if (of_property_read_u32(np, "fsl,adc-clk-div",
+ &info->adc_feature.clk_div_num)) {
+ info->adc_feature.clk_div_num = 2;
+ dev_info(info->dev,
+ "Miss adc-clk-div in dt, set divider to 2.\n");
+ }
+
+ if (of_property_read_u32(np, "fsl,adc-res",
+ &info->adc_feature.res_mode)) {
+ info->adc_feature.res_mode = 12;
+ dev_info(info->dev,
+ "Miss adc-res property in dt, use 8bit mode.\n");
+ }
+
+ if (of_property_read_u32(np, "fsl,adc-sam-time",
+ &info->adc_feature.sam_time)) {
+ info->adc_feature.sam_time = 4;
+ dev_info(info->dev,
+ "Miss adc-sam-time property in dt, set to 4.\n");
+ }
+
+ info->adc_feature.hw_average = of_property_read_bool(np,
+ "fsl,adc-hw-aver-en");
+ if (info->adc_feature.hw_average &&
+ of_property_read_u32(np, "fsl,adc-aver-sam-sel",
+ &info->adc_feature.hw_sam)) {
+ info->adc_feature.hw_sam = 4;
+ dev_info(info->dev,
+ "Miss adc-aver-sam-sel property in dt, set to 4.\n");
+ }
+
+ info->adc_feature.lpm = of_property_read_bool(np,
"fsl,adc-low-power-mode");
+ info->adc_feature.hs_oper = of_property_read_bool(np,
"fsl,adc-high-speed-conv");
+}
+
+static inline void vf610_adc_cfg_post_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data = 0;
+ int gc_data = 0;
+
+ /* clock select and clock devider */
+ switch (adc_feature->clk_div_num) {
+ case 1:
+ break;
+ case 2:
+ cfg_data |= VF610_ADC_CLK_DIV2;
+ break;
+ case 4:
+ cfg_data |= VF610_ADC_CLK_DIV4;
+ break;
+ case 8:
+ cfg_data |= VF610_ADC_CLK_DIV8;
+ break;
+ case 16:
+ switch (adc_feature->clk_sel) {
+ case ADCIOC_BUSCLK_SET:
+ cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
+ break;
+ default:
+ dev_err(info->dev, "error clk divider\n");
+ break;
+ }
+ break;
+ }
+
+ switch (adc_feature->clk_sel) {
+ case ADCIOC_ALTCLK_SET:
+ cfg_data |= VF610_ADC_ALTCLK_SEL;
+ break;
+ case ADCIOC_ADACK_SET:
+ cfg_data |= VF610_ADC_ADACK_SEL;
+ break;
+ default:
+ break;
+ }
+
+ /* resolution mode */
+ switch (adc_feature->res_mode) {
+ case 8:
+ cfg_data |= VF610_ADC_MODE_BIT8;
+ break;
+ case 10:
+ cfg_data |= VF610_ADC_MODE_BIT10;
+ break;
+ case 12:
+ cfg_data |= VF610_ADC_MODE_BIT12;
+ break;
+ default:
+ dev_err(info->dev, "error resolution mode\n");
+ break;
+ }
+
+ /* Defines the sample time duration */
+ switch (adc_feature->sam_time) {
+ case 2:
+ break;
+ case 4:
+ cfg_data |= VF610_ADC_ADSTS_SHORT;
+ break;
+ case 6:
+ cfg_data |= VF610_ADC_ADSTS_NORMAL;
+ break;
+ case 8:
+ cfg_data |= VF610_ADC_ADSTS_LONG;
+ break;
+ case 12:
+ cfg_data |= VF610_ADC_ADLSMP_LONG;
+ break;
+ case 16:
+ cfg_data |= VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_SHORT;
+ break;
+ case 20:
+ cfg_data |= VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_NORMAL;
+ break;
+ case 24:
+ cfg_data |= VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_LONG;
+ break;
+ default:
+ dev_err(info->dev, "error sample duration\n");
+ break;
+ }
+
+ /* low power configuration */
+ cfg_data |= VF610_ADC_ADLPC_EN;
+
+ /* high speed operation */
+ cfg_data |= VF610_ADC_ADHSC_EN;
+
+ /* voltage reference*/
+ switch (adc_feature->vol_ref) {
+ case VF610_ADCIOC_VR_VREF_SET:
+ break;
+ case VF610_ADCIOC_VR_VALT_SET:
+ cfg_data |= VF610_ADC_REFSEL_VALT;
+ break;
+ case VF610_ADCIOC_VR_VBG_SET:
+ cfg_data |= VF610_ADC_REFSEL_VBG;
+ break;
+ default:
+ dev_err(info->dev, "error voltage reference\n");
+ }
+
+ /* trigger select */
+ if (adc_feature->tri_hw)
+ cfg_data |= VF610_ADC_ADTRG_HARD;
+
+ /* hardware average select */
+ if (adc_feature->hw_average) {
+ switch (adc_feature->hw_sam) {
+ case 4:
+ break;
+ case 8:
+ cfg_data |= VF610_ADC_AVGS_8;
+ break;
+ case 16:
+ cfg_data |= VF610_ADC_AVGS_16;
+ break;
+ case 32:
+ cfg_data |= VF610_ADC_AVGS_32;
+ break;
+ default:
+ dev_err(info->dev,
+ "error hardware sample average select\n");
+ }
+
+ gc_data |= VF610_ADC_AVGEN;
+ }
+
+ /* data overwrite enable */
+ if (adc_feature->dataov_en)
+ cfg_data |= VF610_ADC_OVWREN;
+
+ /* Asynchronous clock output enable */
+ if (adc_feature->ac_clk_en)
+ gc_data |= VF610_ADC_ADACKEN;
+
+ /* dma enable */
+ if (adc_feature->dma_en)
+ gc_data |= VF610_ADC_DMAEN;
+
+ /* continue function enable */
+ if (adc_feature->cc_en)
+ gc_data |= VF610_ADC_ADCON;
+
+ /* compare function enable */
+ if (adc_feature->cmp_func_en)
+ gc_data |= VF610_ADC_ACFE;
+
+ /* greater than enable */
+ if (adc_feature->cmp_greater_en)
+ gc_data |= VF610_ADC_ACFGT;
+
+ /* range enable */
+ if (adc_feature->cmp_range_en)
+ gc_data |= VF610_ADC_ACREN;
+
+ writel(cfg_data, info->regs + ADC_CFG);
+ writel(gc_data, info->regs + ADC_GC);
+}
+
+static void vf610_adc_calibration(struct vf610_adc *info)
+{
+ int adc_gc, hc_cfg;
+ int timeout;
+
+ if (!info->adc_feature.calibration)
+ return;
+
+ /* enable calibration interrupt */
+ hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + ADC_HC0);
+
+ adc_gc = readl(info->regs + ADC_GC);
+ writel(adc_gc | VF610_ADC_CAL, info->regs + ADC_GC);
+
+ timeout = wait_for_completion_interruptible_timeout
+ (&info->completion, VF610_ADC_TIMEOUT);
+ if (timeout == 0)
+ dev_err(info->dev, "Timeout for adc calibration\n");
+
+ adc_gc = readl(info->regs + ADC_GS);
+ if (adc_gc & VF610_ADC_CALF)
+ dev_err(info->dev, "ADC calibration failed\n");
+
+ info->adc_feature.calibration = false;
+}
+
+static inline void vf610_adc_cfg_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data = 0;
+
+ cfg_data = readl(info->regs + ADC_CFG);
+
+ /* low power configuration */
+ if (!adc_feature->lpm)
+ cfg_data &= ~VF610_ADC_ADLPC_EN;
+
+ /* high speed operation */
+ if (!adc_feature->hs_oper)
+ cfg_data &= ~VF610_ADC_ADHSC_EN;
+
+ /* trigger select */
+ if (adc_feature->tri_hw)
+ cfg_data |= VF610_ADC_ADTRG_HARD;
+
+ writel(cfg_data, info->regs + ADC_CFG);
+}
+
+static void vf610_adc_hw_init(struct vf610_adc *info)
+{
+ /* pin control for Sliding rheostat */
+ writel(info->adc_feature.pctl, info->regs + ADC_PCTL);
+
+ /* CFG: Feature set */
+ vf610_adc_cfg_post_set(info);
+
+ /* adc calibration */
+ vf610_adc_calibration(info);
+
+ /* CFG: power and speed set */
+ vf610_adc_cfg_set(info);
+}
+
+static inline int vf610_adc_read_data(struct vf610_adc *info)
+{
+ int result;
+
+ result = readl(info->regs + ADC_R0);
+
+ switch (info->adc_feature.res_mode) {
+ case 8:
+ result &= VF610_ADC_DATA_BIT8_MASK;
+ break;
+ case 10:
+ result &= VF610_ADC_DATA_BIT10_MASK;
+ break;
+ case 12:
+ result &= VF610_ADC_DATA_BIT12_MASK;
+ break;
+ default:
+ dev_err(info->dev, "error resolution mode\n");
+ break;
+ }
+
+ return result;
+}
+
+static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
+{
+ struct vf610_adc *info = (struct vf610_adc *)dev_id;
+ int coco;
+
+ coco = readl(info->regs + ADC_HS);
+ if (coco & VF610_ADC_HS_COCO0) {
+ info->value = vf610_adc_read_data(info);
+ complete(&info->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int vf610_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+ unsigned int hc_cfg;
+ unsigned long timeout;
+
+ /* Check for invalid channel */
+ if (chan->channel > VF610_ADC_MAX_CHANS_NUM)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+
+ hc_cfg = VF610_ADC_ADCHC(chan->channel);
+ hc_cfg |= VF610_ADC_AIEN;
+ writel(hc_cfg, info->regs + ADC_HC0);
+ timeout = wait_for_completion_interruptible_timeout
+ (&info->completion, VF610_ADC_TIMEOUT);
+ *val = info->value;
+
+ mutex_unlock(&indio_dev->mlock);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = info->vref_uv >> info->adc_feature.res_mode;
+ *val2 = 0;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int vf610_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ if (readval == NULL)
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info vf610_adc_iio_info = {
+ .read_raw = &vf610_read_raw,
+ .debugfs_reg_access = &vf610_adc_reg_access,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct of_device_id vf610_adc_match[] = {
+ { .compatible = "fsl,vf610-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_adc_dt_ids);
+
+static int vf610_adc_probe(struct platform_device *pdev)
+{
+ struct vf610_adc *info = NULL;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+ int ret = -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(info->dev, info->irq,
+ vf610_adc_isr, 0,
+ dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+ info->irq);
+ return ret;
+ }
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+ PTR_ERR(info->clk));
+ ret = PTR_ERR(info->clk);
+ return ret;
+ }
+
+ info->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (!IS_ERR(info->vref)) {
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable vref regulator: %d\n", ret);
+ return ret;
+ }
+ } else {
+ info->vref = NULL;
+ }
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ init_completion(&info->completion);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &vf610_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = vf610_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
+
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock.\n");
+ return ret;
+ }
+
+ vf610_adc_cfg_of_init(info);
+ vf610_adc_hw_init(info);
+
+ return 0;
+}
+
+static int vf610_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ if (info->vref)
+ regulator_disable(info->vref);
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int hc_cfg;
+
+ /* enter to stop mode */
+ hc_cfg = readl(info->regs + ADC_HC0);
+ hc_cfg |= VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + ADC_HC0);
+
+ clk_disable_unprepare(info->clk);
+ if (info->vref)
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int vf610_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ if (info->vref) {
+ ret = regulator_enable(info->vref);
+ if (ret)
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ return ret;
+
+ vf610_adc_hw_init(info);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops,
+ vf610_adc_suspend,
+ vf610_adc_resume);
+
+static struct platform_driver vf610_adc_driver = {
+ .probe = vf610_adc_probe,
+ .remove = vf610_adc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = vf610_adc_match,
+ .pm = &vf610_adc_pm_ops,
+ },
+};
+
+module_platform_driver(vf610_adc_driver);
+
+MODULE_AUTHOR("Fugang Duan <b38...@freescale.com>");
+MODULE_DESCRIPTION("Freescale VF610 ADC driver");
+MODULE_LICENSE("GPL v2");
--
1.7.2.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
