Re: [PATCH 2/2] ARM: apf28dev: dts: set gpio polarity for usb regulator and pinctrl for regulator gpio

[Shawn Guo]

On Sat, Nov 30, 2013 at 09:51:13AM +0100, Gwenhael Goavec-Merou wrote:
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-me...@armadeus.com>

Changed the patch subject to "ARM: dts: apf28dev: ..." and applied.

Shawn

> ---
>  arch/arm/boot/dts/imx28-apf28dev.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts 
> b/arch/arm/boot/dts/imx28-apf28dev.dts
> index 741aecb..334dea5 100644
> --- a/arch/arm/boot/dts/imx28-apf28dev.dts
> +++ b/arch/arm/boot/dts/imx28-apf28dev.dts
> @@ -66,6 +66,16 @@
>                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
>                                       fsl,pull-up = <MXS_PULL_DISABLE>;
>                               };
> +
> +                             usb0_otg_apf28dev: otg-apf28dev@0 {
> +                                     reg = <0>;
> +                                     fsl,pinmux-ids = <
> +                                             MX28_PAD_LCD_D23__GPIO_1_23
> +                                     >;
> +                                     fsl,drive-strength = <MXS_DRIVE_4mA>;
> +                                     fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +                                     fsl,pull-up = <MXS_PULL_DISABLE>;
> +                             };
>                       };
>  
>                       lcdif@80030000 {
> @@ -131,6 +141,8 @@
>  
>       ahb@80080000 {
>               usb0: usb@80080000 {
> +                     pinctrl-names = "default";
> +                     pinctrl-0 = <&usb0_otg_apf28dev>;
>                       vbus-supply = <&reg_usb0_vbus>;
>                       status = "okay";
>               };
> @@ -160,6 +172,7 @@
>                       regulator-min-microvolt = <5000000>;
>                       regulator-max-microvolt = <5000000>;
>                       gpio = <&gpio1 23 1>;
> +                     enable-active-high;
>               };
>       };
>  
> -- 
> 1.8.3.2
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html