On Thu, Dec 05, 2013 at 03:50:19PM +0000, Andrew Lunn wrote: > The marvell SATA driver can optionally make use of clocks specified in > the DT node. This has been available in the driver since Febuary 2012, > but the documentation is missing from the binding. Add it. > > Signed-off-by: Andrew Lunn <[email protected]> > --- > FYI: This will cause merge conflicts with the SATA PHY driver comming soon. > > v1->v2: > s/pHandle/phandle/ > Add specifier. > > Not addressed yet is changing "0" to "port0", etc. Waiting for feedback > from Mark Rutland.
I'm happy with the clock-names as they are, thanks for applying the other changes. Thanks for fixing up the documentation! Acked-by: Mark Rutland <[email protected]> > --- > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/ata/marvell.txt > b/Documentation/devicetree/bindings/ata/marvell.txt > index b5cdd20cde9c..acfdb439bb6c 100644 > --- a/Documentation/devicetree/bindings/ata/marvell.txt > +++ b/Documentation/devicetree/bindings/ata/marvell.txt > @@ -6,11 +6,17 @@ Required Properties: > - interrupts : Interrupt controller is using > - nr-ports : Number of SATA ports in use. > > +Optional Properties: > +- clocks : List of phandle and specifier to clocks > +- clock-names : Must be "0", "1", mapping port number to clock. > + > Example: > > sata@80000 { > compatible = "marvell,orion-sata"; > reg = <0x80000 0x5000>; > interrupts = <21>; > + clocks = <&gate_clk 14>, <&gate_clk 15>; > + clock-names = "0", "1"; > nr-ports = <2>; > } > -- > 1.8.5 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
