On Thu, Dec 05, 2013 at 03:56:56PM +0100, Denis Carikli wrote: > The following devices/functionalities were added: > * Main and secondary UARTs. > * i2c and the pcf8563 device. > * Ethernet. > * NAND. > * The BP1 button. > * The LED. > * Watchdog > * SD. > > Cc: Rob Herring <[email protected]> > Cc: Pawel Moll <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Stephen Warren <[email protected]> > Cc: Ian Campbell <[email protected]> > Cc: [email protected] > Cc: Sascha Hauer <[email protected]> > Cc: [email protected] > Cc: Eric Bénard <[email protected]> > Signed-off-by: Denis Carikli <[email protected]> > --- > ChangeLog v10->v13: > - The display part was splitted out because it depends on other > patches that are not applied yet, the commit message was updated > accordingly. > - The new GPIO and input defines are now used in the dts(i). > > ChangeLog v9->v10: > - Adapted to the new pingrp patches. > > ChangeLog v8->v9: > - Licenses were shortened. > --- > arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 60 ++++++++++ > .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 119 > ++++++++++++++++++++ > 2 files changed, 179 insertions(+) > create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi > create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
Added the dtb target into arch/arm/boot/dts/Makefile, and applied the patch. Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
