On Monday 06 January 2014 11:49 PM, Mark Rutland wrote:
On Fri, Dec 20, 2013 at 05:35:53PM +0000, Balaji T K wrote:
Add pbias regulator node as a child of system control
module - syscon.
Signed-off-by: Balaji T K <balaj...@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 18 ++++++++++++++++++
5 files changed, 90 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d0df4c4..4e68df1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -110,6 +110,23 @@
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_general: tisyscon@4a002e00 {
+ compatible = "ti,control-syscon", "syscon",
"simple-bus";
Please, don't use simple-bus like that. The components below this node
depend on it. It is _NOT_ a simple bus. Make the ti,control-syscon
driver probe it's children.
Hi Mark,
Actually ti,control-syscon driver does not exist, so I can remove it,
and simple-bus is needed for child creation.
+ reg = <0x4a002e00 0x7c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
