Some hardware may be broken in interesting and board-specific ways, such
that various bits of functionality don't work. This patch provides a
mechanism for overriding mii registers during init based on the contents of
the device tree data, allowing board-specific fixups without having to
pollute generic code.

Signed-off-by: Matthew Garrett <matthew.garr...@nebula.com>
---
 Documentation/devicetree/bindings/net/phy.txt |  13 +++
 drivers/net/phy/phy_device.c                  |  29 +++++-
 drivers/of/of_net.c                           | 124 ++++++++++++++++++++++++++
 include/linux/of_net.h                        |  12 +++
 4 files changed, 177 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/phy.txt 
b/Documentation/devicetree/bindings/net/phy.txt
index 7cd18fb..552a5e0 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -23,6 +23,19 @@ Optional Properties:
   assume clause 22. The compatible list may also contain other
   elements.
 
+The following properties may be added to either the phy node or the parent
+ethernet device:
+
+- phy-mii-advertise-10half: Whether to advertise half-duplex 10MBit
+- phy-mii-advertise-10full: Whether to advertise full-duplex 10MBit
+- phy-mii-advertise-100half: Whether to advertise half-duplex 100MBit
+- phy-mii-advertise-100full: Whether to advertise full-duplex 100MBit
+- phy-mii-advertise-100base4: Whether to advertise 100base4
+- phy-mii-advertise-1000half: Whether to advertise half-duplex 1000MBit
+- phy-mii-advertise-1000full: Whether to advertise full-duplex 1000MBit
+- phy-mii-as-master: Configure phy to act as master/slave
+- phy-mii-manual-master: Enable/disable manual master/slave configuration
+
 Example:
 
 ethernet-phy@0 {
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d6447b3..91793bc 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -33,6 +33,7 @@
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
+#include <linux/of_net.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -497,6 +498,28 @@ void phy_disconnect(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_disconnect);
 
+int phy_override_from_of(struct phy_device *phydev)
+{
+       int reg, regval;
+       u16 val, mask;
+
+       /* Check for phy register overrides from OF */
+       for (reg = 0; reg < 16; reg++) {
+               if (!of_get_mii_register(phydev, reg, &val, &mask)) {
+                       if (!mask)
+                               continue;
+                       regval = phy_read(phydev, reg);
+                       if (regval < 0)
+                               continue;
+                       regval &= ~mask;
+                       regval |= val;
+                       phy_write(phydev, reg, regval);
+               }
+       }
+
+       return 0;
+}
+
 int phy_init_hw(struct phy_device *phydev)
 {
        int ret;
@@ -508,7 +531,11 @@ int phy_init_hw(struct phy_device *phydev)
        if (ret < 0)
                return ret;
 
-       return phydev->drv->config_init(phydev);
+       ret = phydev->drv->config_init(phydev);
+       if (ret < 0)
+               return ret;
+
+       return phy_override_from_of(phydev);
 }
 
 /**
diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
index 8f9be2e..4545608 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -93,3 +93,127 @@ const void *of_get_mac_address(struct device_node *np)
        return NULL;
 }
 EXPORT_SYMBOL(of_get_mac_address);
+
+/**
+ * Provide phy register overrides from the device tree. Some hardware may
+ * be broken in interesting and board-specific ways, so we want a mechanism
+ * for the board data to provide overrides for default values. This should be
+ * called during phy init.
+ */
+int of_get_mii_register(struct phy_device *phydev, int reg, u16 *val,
+                       u16 *mask)
+{
+       u32 tmp;
+       struct device *dev = &phydev->dev;
+       struct device_node *np = dev->of_node;
+
+       *val = 0;
+       *mask = 0;
+
+       if (!np && dev->parent->of_node)
+               np = dev->parent->of_node;
+
+       if (!np)
+               return 0;
+
+       switch (reg) {
+       case MII_ADVERTISE:
+               if (!of_property_read_u32(np, "phy-mii-advertise-10half",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_10HALF;
+                               phydev->advertising |= SUPPORTED_10baseT_Half;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_10baseT_Half);
+                       }
+
+                       *mask |= ADVERTISE_10HALF;
+               }
+               if (!of_property_read_u32(np, "phy-mii-advertise-10full",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_10FULL;
+                               phydev->advertising |= SUPPORTED_10baseT_Full;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_10baseT_Full);
+                       }
+
+                       *mask |= ADVERTISE_10FULL;
+               }
+               if (!of_property_read_u32(np, "phy-mii-advertise-100half",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_100HALF;
+                               phydev->advertising |= SUPPORTED_100baseT_Half;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_100baseT_Half);
+                       }
+
+                       *mask |= ADVERTISE_100HALF;
+               }
+               if (!of_property_read_u32(np, "phy-mii-advertise-100full",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_100FULL;
+                               phydev->advertising |= SUPPORTED_100baseT_Full;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_100baseT_Full);
+                       }
+
+                       *mask |= ADVERTISE_100FULL;
+               }
+               if (!of_property_read_u32(np, "phy-mii-advertise-100base4",
+                                          &tmp)) {
+                       if (tmp)
+                               *val |= ADVERTISE_100BASE4;
+                       *mask |= ADVERTISE_100BASE4;
+               }
+               break;
+       case MII_CTRL1000:
+               if (!of_property_read_u32(np, "phy-mii-advertise-1000full",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_1000FULL;
+                               phydev->advertising |= SUPPORTED_1000baseT_Full;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_1000baseT_Full);
+                       }
+
+                       *mask |= ADVERTISE_1000FULL;
+               }
+               if (!of_property_read_u32(np, "phy-mii-advertise-1000half",
+                                          &tmp)) {
+                       if (tmp) {
+                               *val |= ADVERTISE_1000HALF;
+                               phydev->advertising |= SUPPORTED_1000baseT_Half;
+                       } else {
+                               phydev->advertising &=
+                                       ~(SUPPORTED_1000baseT_Half);
+                       }
+
+                       *mask |= ADVERTISE_1000HALF;
+               }
+               if (!of_property_read_u32(np, "phy-mii-as-master",
+                                          &tmp)) {
+                       if (tmp)
+                               *val |= CTL1000_AS_MASTER;
+                       *mask |= CTL1000_AS_MASTER;
+               }
+               if (!of_property_read_u32(np, "phy-mii-manual-master",
+                                          &tmp)) {
+                       if (tmp)
+                               *val |= CTL1000_ENABLE_MASTER;
+                       *mask |= CTL1000_ENABLE_MASTER;
+               }
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+EXPORT_SYMBOL(of_get_mii_register);
diff --git a/include/linux/of_net.h b/include/linux/of_net.h
index 34597c8..2e478bc 100644
--- a/include/linux/of_net.h
+++ b/include/linux/of_net.h
@@ -7,10 +7,14 @@
 #ifndef __LINUX_OF_NET_H
 #define __LINUX_OF_NET_H
 
+#include <linux/phy.h>
+
 #ifdef CONFIG_OF_NET
 #include <linux/of.h>
 extern int of_get_phy_mode(struct device_node *np);
 extern const void *of_get_mac_address(struct device_node *np);
+extern int of_get_mii_register(struct phy_device *np, int reg, u16 *val,
+                              u16 *mask);
 #else
 static inline int of_get_phy_mode(struct device_node *np)
 {
@@ -21,6 +25,14 @@ static inline const void *of_get_mac_address(struct 
device_node *np)
 {
        return NULL;
 }
+static inline int of_get_mii_register(struct phy_device *np, int reg, u16 *val,
+                                     u16 *mask)
+{
+       *val = 0;
+       *mask = 0;
+
+       return -EINVAL;
+}
 #endif
 
 #endif /* __LINUX_OF_NET_H */
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to