On Mon, 17 Feb 2014 16:29:40 +0000, Ben Dooks <ben.do...@codethink.co.uk> wrote:
> The of_mdiobus_register_phy() is not setting phy->irq this causing
> some drivers to incorrectly assume that the PHY does not have an
> IRQ associated with it or install an interrupt handler for the
> PHY.
> 
> Simplify the code setting irq and set the phy->irq at the same
> time so that the case if mdio->irq is not NULL is easier to read.
> 
> This fixes the issue:
>  net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI
> 
> to the correct:
>  net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
> 
> Signed-off-by: Ben Dooks <ben.do...@codethink.co.uk>
> ---
>  drivers/of/of_mdio.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index 875b7b6..7b3e7b0 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -44,7 +44,7 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, 
> struct device_node *chi
>  {
>       struct phy_device *phy;
>       bool is_c45;
> -     int rc, prev_irq;
> +     int rc;
>       u32 max_speed = 0;
>  
>       is_c45 = of_device_is_compatible(child,
> @@ -55,11 +55,11 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, 
> struct device_node *chi
>               return 1;
>  
>       if (mdio->irq) {
> -             prev_irq = mdio->irq[addr];
> -             mdio->irq[addr] =
> -                     irq_of_parse_and_map(child, 0);
> -             if (!mdio->irq[addr])
> -                     mdio->irq[addr] = prev_irq;

I cannot for the life for me remeber why the code was structured that
way. Your change is better.

> +             rc = irq_of_parse_and_map(child, 0);
> +             if (rc > 0) {
> +                     mdio->irq[addr] = rc;
> +                     phy->irq = rc;
> +             }
>       }

The outer if is merely protecting against no irq array being allocated
for the bus. Would not the following be better:

        rc = irq_of_parse_and_map(child, 0);
        if (rc > 0) {
                phy->irq = rc;
                if (mdio->irq)
                        mdio->irq[addr] = rc;
        }

g.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to