On Thu, Feb 27, 2014 at 10:28:04PM +0100, Sebastian Hesselbarth wrote:
> With all the DT support preparation done, we are able to move Dove
> to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot
> for a while before removal. Also, convert SATA PHY Kconfig entry,
> which is DT-only.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
> ---
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Pawel Moll <pawel.m...@arm.com>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
> Cc: Kumar Gala <ga...@codeaurora.org>
> Cc: Russell King <li...@arm.linux.org.uk>
> Cc: Jason Cooper <ja...@lakedaemon.net>
> Cc: Andrew Lunn <and...@lunn.ch>
> Cc: Gregory Clement <gregory.clem...@free-electrons.com>
> Cc: Kishon Vijay Abraham I <kis...@ti.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-ker...@vger.kernel.org
> ---
> arch/arm/boot/dts/Makefile | 12 ++++++------
> arch/arm/mach-dove/Kconfig | 12 ------------
> arch/arm/mach-dove/Makefile | 1 -
> arch/arm/mach-mvebu/Kconfig | 12 ++++++++++++
> arch/arm/mach-mvebu/Makefile | 1 +
> arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} | 20
> ++++++++------------
> drivers/phy/Kconfig | 2 +-
> 7 files changed, 28 insertions(+), 32 deletions(-)
> rename arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} (61%)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 032030361bef..376a2573e500 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -55,11 +55,6 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
> berlin2cd-google-chromecast.dtb
> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
> da850-evm.dtb
> -dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
> - dove-cubox.dtb \
> - dove-d2plug.dtb \
> - dove-d3plug.dtb \
> - dove-dove-db.dtb
> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos4210-smdkv310.dtb \
> @@ -132,7 +127,12 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
> armada-xp-gp.dtb \
> armada-xp-netgear-rn2120.dtb \
> armada-xp-matrix.dtb \
> - armada-xp-openblocks-ax3-4.dtb
> + armada-xp-openblocks-ax3-4.dtb \
> + dove-cm-a510.dtb \
> + dove-cubox.dtb \
> + dove-d2plug.dtb \
> + dove-d3plug.dtb \
> + dove-dove-db.dtb
This is going to conflict badly with
a02dd0271d01 ARM: mvebu: select dtbs from MACH_ARMADA_*
Perhaps you could mimic what Andrew did in his series:
dove := dove-cm-a510.dtb \
dove-cubox.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
dtb-$(CONFIG_ARCH_DOVE) += $(dove)
dtb-$(CONFIG_MACH_DOVE) += $(dove)
We plan on re-alphabetizing next window to prevent bad conflicts in this
window.
thx,
Jason.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
