This is the driver for Xilinx AXI PCIe Host Bridge Soft IP

Signed-off-by: Srikanth Thokala <stho...@xilinx.com>
---
- Rebased on v3.14.0-rc5
- Removed IP specific DT properties like include-rc, axibar-num etc.,
  as suggested by Jason and Bjorn, Thanks
---
 .../devicetree/bindings/pci/xilinx-pcie.txt        |   23 +
 drivers/pci/host/Kconfig                           |    7 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pci-xilinx.c                      |  940 ++++++++++++++++++++
 4 files changed, 971 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
 create mode 100644 drivers/pci/host/pci-xilinx.c

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt 
b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
new file mode 100644
index 0000000..b0ea448
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -0,0 +1,23 @@
+* Xilinx AXI PCIe Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
+- reg: Should contain AXI PCIe registers location and length
+- interrupts: Should contain AXI PCIe interrupt
+- ranges: ranges for the PCI memory regions
+       Please refer to the standard PCI bus binding document for a more
+       detailed explanation
+
+Example:
+++++++++
+
+       pci_express: axi-pcie@50000000 {
+               #address-cells = <3>;
+               #size-cells = <2>;
+               compatible = "xlnx,axi-pcie-host-1.00.a";
+               reg = < 0x50000000 0x10000000 >;
+               interrupts = < 0 52 4 >;
+               ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
+       };
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 47d46c6..8771824 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -33,4 +33,11 @@ config PCI_RCAR_GEN2
          There are 3 internal PCI controllers available with a single
          built-in EHCI/OHCI host controller present on each one.
 
+config PCI_XILINX
+       bool "Xilinx AXI PCIe host bridge support"
+       depends on ARCH_ZYNQ
+       help
+         Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+         Host Bridge driver.
+
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 13fb333..4e9c843 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_PCI_XILINX) += pci-xilinx.o
diff --git a/drivers/pci/host/pci-xilinx.c b/drivers/pci/host/pci-xilinx.c
new file mode 100644
index 0000000..209d2fb
--- /dev/null
+++ b/drivers/pci/host/pci-xilinx.c
@@ -0,0 +1,940 @@
+/*
+ * PCIe host controller driver for Xilinx AXI PCIe Bridge
+ *
+ * Copyright (c) 2012 - 2014 Xilinx, Inc.
+ *
+ * Based on the Tegra PCIe driver
+ *
+ * Bits taken from Synopsys Designware Host controller driver
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* Register definitions */
+#define XILINX_PCIE_REG_VSECC          0x00000128
+#define XILINX_PCIE_REG_VSECH          0x0000012c
+#define XILINX_PCIE_REG_BIR            0x00000130
+#define XILINX_PCIE_REG_BSCR           0x00000134
+#define XILINX_PCIE_REG_IDR            0x00000138
+#define XILINX_PCIE_REG_IMR            0x0000013c
+#define XILINX_PCIE_REG_BLR            0x00000140
+#define XILINX_PCIE_REG_PSCR           0x00000144
+#define XILINX_PCIE_REG_RPSC           0x00000148
+#define XILINX_PCIE_REG_MSIBASE1       0x0000014c
+#define XILINX_PCIE_REG_MSIBASE2       0x00000150
+#define XILINX_PCIE_REG_RPEFR          0x00000154
+#define XILINX_PCIE_REG_RPIFR1         0x00000158
+#define XILINX_PCIE_REG_RPIFR2         0x0000015c
+#define XILINX_PCIE_REG_VSECC2         0x00000200
+#define XILINX_PCIE_REG_VSECH2         0x00000204
+
+/* Interrupt registers definitions */
+#define XILINX_PCIE_INTR_LINK_DOWN     BIT(0)
+#define XILINX_PCIE_INTR_ECRC_ERR      BIT(1)
+#define XILINX_PCIE_INTR_STR_ERR       BIT(2)
+#define XILINX_PCIE_INTR_HOT_RESET     BIT(3)
+#define XILINX_PCIE_INTR_CFG_COMPL     GENMASK(7, 5)
+#define XILINX_PCIE_INTR_CFG_TIMEOUT   BIT(8)
+#define XILINX_PCIE_INTR_CORRECTABLE   BIT(9)
+#define XILINX_PCIE_INTR_NONFATAL      BIT(10)
+#define XILINX_PCIE_INTR_FATAL         BIT(11)
+#define XILINX_PCIE_INTR_INTX          BIT(16)
+#define XILINX_PCIE_INTR_MSI           BIT(17)
+#define XILINX_PCIE_INTR_SLV_UNSUPP    BIT(20)
+#define XILINX_PCIE_INTR_SLV_UNEXP     BIT(21)
+#define XILINX_PCIE_INTR_SLV_COMPL     BIT(22)
+#define XILINX_PCIE_INTR_SLV_ERRP      BIT(23)
+#define XILINX_PCIE_INTR_SLV_CMPABT    BIT(24)
+#define XILINX_PCIE_INTR_SLV_ILLBUR    BIT(25)
+#define XILINX_PCIE_INTR_MST_DECERR    BIT(26)
+#define XILINX_PCIE_INTR_MST_SLVERR    BIT(27)
+#define XILINX_PCIE_INTR_MST_ERRP      BIT(28)
+#define XILINX_PCIE_IMR_ALL_MASK       0x1FF30FED
+#define XILINX_PCIE_IDR_ALL_MASK       0xFFFFFFFF
+
+/* Root Port Error FIFO Read Register definitions */
+#define XILINX_PCIE_RPEFR_ERR_VALID    BIT(18)
+#define XILINX_PCIE_RPEFR_REQ_ID       GENMASK(15, 0)
+#define XILINX_PCIE_RPEFR_ALL_MASK     0xFFFFFFFF
+
+/* Root Port Interrupt FIFO Read Register 1 definitions */
+#define XILINX_PCIE_RPIFR1_INTR_VALID  BIT(31)
+#define XILINX_PCIE_RPIFR1_MSI_INTR    BIT(30)
+#define XILINX_PCIE_RPIFR1_INTR_ASSRT  BIT(29)
+#define XILINX_PCIE_RPIFR1_MSI_ADR_MASK        GENMASK(26, 16)
+#define XILINX_PCIE_RPIFR1_ALL_MASK    0xFFFFFFFF
+#define XILINX_PCIE_RPIFR1_MSI_ADR_SHIFT       16
+
+/* Bridge Info Register definitions */
+#define XILINX_PCIE_BIR_ECAM_SZ_MASK   GENMASK(18, 16)
+#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT  16
+
+/* Root Port Interrupt FIFO Read Register 2 definitions */
+#define XILINX_PCIE_RPIFR2_MSG_DATA    GENMASK(15, 0)
+
+/* Root Port Status/control Register definitions */
+#define XILINX_PCIE_REG_RPSC_BEN       BIT(0)
+
+/* Phy Status/Control Register definitions */
+#define XILINX_PCIE_REG_PSCR_LNKUP     BIT(11)
+
+/* ECAM definitions */
+#define ECAM_BUS_NUM_SHIFT             20
+#define ECAM_DEV_NUM_SHIFT             12
+
+/* PCI Configuration space Bus Number Register definitions */
+#define PCI_SECONDARY_BUS_NUM_SHIFT    8
+#define PCI_SUBORDINATE_BUS_NUM_SHIFT  16
+#define PCI_LATENCY_TIMER_MASK         GENMASK(31, 24)
+
+/* Number of MSI IRQs */
+#define XILINX_NUM_MSI_IRQS            128
+
+/* Number of Memory Resources */
+#define XILINX_MAX_NUM_RESOURCES       3
+
+/**
+ * struct xilinx_pcie_port - PCIe port information
+ * @reg_base: IO Mapped Register Base
+ * @phys_reg_base: Physical Register Base
+ * @reg_size: Register space
+ * @irq: Interrupt number
+ * @msg_addr: MSI message address
+ * @root_busno: Root Bus number
+ * @mem_resno: Number of memory resources
+ * @link_up: Link status flag
+ * @node: Device tree node
+ * @dev: Device pointer
+ * @irq_domain: IRQ domain pointer
+ * @mem: Memory Resources
+ */
+struct xilinx_pcie_port {
+       void __iomem *reg_base;
+       u32 phys_reg_base;
+       u32 reg_size;
+       u32 irq;
+       unsigned long msg_addr;
+       u8 root_busno;
+       u8 mem_resno;
+       bool link_up;
+       struct device_node *node;
+       struct device *dev;
+       struct irq_domain *irq_domain;
+       struct resource mem[XILINX_MAX_NUM_RESOURCES];
+};
+
+static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+
+static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
+{
+       return sys->private_data;
+}
+
+static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
+{
+       return readl(port->reg_base + reg);
+}
+
+static inline void pcie_write(struct xilinx_pcie_port *port,
+                                        u32 val, u32 reg)
+{
+       writel(val, port->reg_base + reg);
+}
+
+static inline bool xilinx_pcie_is_link_up(struct xilinx_pcie_port *port)
+{
+       return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
+               XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
+}
+
+/**
+ * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
+ * @port: PCIe port information
+ */
+static inline void
+xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
+{
+       u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
+
+       if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
+               dev_dbg(port->dev, "Requester ID %d\n",
+                       val & XILINX_PCIE_RPEFR_REQ_ID);
+               pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
+                               XILINX_PCIE_REG_RPEFR);
+       }
+}
+
+/**
+ * xilinx_pcie_verify_config - Verify configuration
+ * @port: PCIe port information
+ * @bus: Bus structure of current bus
+ * @devfn: device/function
+ *
+ * Return: 0 on success and PCIBIOS_DEVICE_NOT_FOUND on error
+ */
+static int xilinx_pcie_verify_config(struct xilinx_pcie_port *port,
+                                       struct pci_bus *bus,
+                                       unsigned int devfn)
+{
+       /* Check if link is up when trying to access downstream ports */
+       if (bus->number != port->root_busno)
+               if (!xilinx_pcie_is_link_up(port))
+                       return 0;
+
+       /* Only one device down on each root port */
+       if (bus->number == port->root_busno && devfn > 0)
+               return 0;
+
+       /*
+        * Do not read more than one device on the bus directly attached
+        * to RC.
+        */
+       if (bus->primary == port->root_busno && devfn > 0)
+               return 0;
+
+       return 1;
+}
+
+/**
+ * xilinx_pcie_get_config_base - Get configuration base
+ * @port: PCIe port information
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ *        accessed.
+ */
+static void __iomem *xilinx_pcie_get_config_base(struct xilinx_pcie_port *port,
+                                                struct pci_bus *bus,
+                                                unsigned int devfn,
+                                                int where)
+{
+       int relbus;
+
+       relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
+                (devfn << ECAM_DEV_NUM_SHIFT);
+
+       return port->reg_base + relbus + where;
+}
+
+/**
+ * xilinx_pcie_read_config - Read configuration space
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be read
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ *        EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
+ *        on failure.
+ */
+static int xilinx_pcie_read_config(struct pci_bus *bus,
+                               unsigned int devfn,
+                               int where,
+                               int size,
+                               u32 *val)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+       void __iomem *addr;
+
+       if (!port) {
+               BUG();
+               return -EINVAL;
+       }
+
+       if (!xilinx_pcie_verify_config(port, bus, devfn)) {
+               *val = 0xFFFFFFFF;
+               return PCIBIOS_DEVICE_NOT_FOUND;
+       }
+
+       addr = xilinx_pcie_get_config_base(port, bus, devfn, where);
+       if (!addr)
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+
+       switch (size) {
+       case 1:
+               *val = readb(addr);
+               break;
+       case 2:
+               *val = readw(addr);
+               break;
+       default:
+               *val = readl(addr);
+               break;
+       }
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * xilinx_pcie_write_config - Write configuration space
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be written to device
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success,
+ *        EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER
+ *        on failure.
+ */
+static int xilinx_pcie_write_config(struct pci_bus *bus,
+                               unsigned int devfn,
+                               int where,
+                               int size,
+                               u32 val)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+       void __iomem *addr;
+
+       if (!port) {
+               BUG();
+               return -EINVAL;
+       }
+
+       if (!xilinx_pcie_verify_config(port, bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       addr = xilinx_pcie_get_config_base(port, bus, devfn, where);
+       if (!addr)
+               return PCIBIOS_BAD_REGISTER_NUMBER;
+
+       switch (size) {
+       case 1:
+               writeb(val, addr);
+               break;
+       case 2:
+               writew(val, addr);
+               break;
+       default:
+               writel(val, addr);
+               break;
+       }
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCIe operations */
+static struct pci_ops xilinx_pcie_ops = {
+       .read  = xilinx_pcie_read_config,
+       .write = xilinx_pcie_write_config,
+};
+
+/* MSI functions */
+
+/**
+ * xilinx_pcie_destroy_msi - Free MSI number
+ * @irq: IRQ to be freed
+ */
+static void xilinx_pcie_destroy_msi(unsigned int irq)
+{
+       struct irq_desc *desc;
+       struct msi_desc *msi;
+       struct xilinx_pcie_port *port;
+
+       desc = irq_to_desc(irq);
+       msi = irq_desc_get_msi_desc(desc);
+       port = sys_to_pcie(msi->dev->bus->sysdata);
+       if (!port) {
+               BUG();
+               return;
+       }
+
+       if (!test_bit(irq, msi_irq_in_use))
+               dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
+       else
+               clear_bit(irq, msi_irq_in_use);
+}
+
+/**
+ * xilinx_pcie_assign_msi - Allocate MSI number
+ * @port: PCIe port structure
+ *
+ * Return: A valid IRQ on success and error value on failure.
+ */
+static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
+{
+       int pos;
+
+       pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+       if (pos < XILINX_NUM_MSI_IRQS)
+               set_bit(pos, msi_irq_in_use);
+       else
+               return -ENOSPC;
+
+       return irq_find_mapping(port->irq_domain, pos);
+}
+
+/**
+ * xilinx_msi_teardown_irq - Destroy the MSI
+ * @chip: MSI Chip descriptor
+ * @irq: MSI IRQ to destroy
+ */
+static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+{
+       xilinx_pcie_destroy_msi(irq);
+}
+
+/**
+ * xilinx_pcie_msi_setup_irq - Setup MSI request
+ * @chip: MSI chip pointer
+ * @pdev: PCIe device pointer
+ * @desc: MSI descriptor pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
+                                       struct pci_dev *pdev,
+                                       struct msi_desc *desc)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+       int irq;
+       struct msi_msg msg;
+
+       if (!port) {
+               BUG();
+               return -EINVAL;
+       }
+
+       irq = xilinx_pcie_assign_msi(port);
+       if (irq < 0)
+               return irq;
+
+       irq_set_msi_desc(irq, desc);
+
+       msg.address_hi = 0;
+       msg.address_lo = virt_to_phys((void *)port->msg_addr);
+       msg.data = irq;
+
+       write_msi_msg(irq, &msg);
+
+       return 0;
+}
+
+/* MSI Chip Descriptor */
+static struct msi_chip xilinx_pcie_msi_chip = {
+       .setup_irq = xilinx_pcie_msi_setup_irq,
+       .teardown_irq = xilinx_msi_teardown_irq,
+};
+
+/* HW Interrupt Chip Descriptor */
+static struct irq_chip xilinx_msi_irq_chip = {
+       .name = "Xilinx PCIe MSI",
+       .irq_enable = unmask_msi_irq,
+       .irq_disable = mask_msi_irq,
+       .irq_mask = mask_msi_irq,
+       .irq_unmask = unmask_msi_irq,
+};
+
+/**
+ * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+                               irq_hw_number_t hwirq)
+{
+       irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
+       irq_set_chip_data(irq, domain->host_data);
+       set_irq_flags(irq, IRQF_VALID);
+
+       return 0;
+}
+
+/* IRQ Domain operations */
+static const struct irq_domain_ops msi_domain_ops = {
+       .map = xilinx_pcie_msi_map,
+};
+
+/**
+ * xilinx_pcie_enable_msi - Enable MSI support
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
+{
+       port->msg_addr = __get_free_pages(GFP_KERNEL, 0);
+
+       pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
+       pcie_write(port, virt_to_phys((void *)port->msg_addr),
+                       XILINX_PCIE_REG_MSIBASE2);
+}
+
+/* PCIe HW Functions */
+
+/**
+ * xilinx_pcie_setup - Setup memory resources
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: '1' on success and '0' on failure
+ */
+static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(sys);
+       int i;
+
+       if (!port)
+               return 0;
+
+       for (i = 0; i < port->mem_resno; i++)
+               pci_add_resource_offset(&sys->resources, &port->mem[i],
+                                       sys->mem_offset);
+
+       return 1;
+}
+
+/**
+ * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
+ * @bus: PCIe bus
+ */
+static void xilinx_pcie_add_bus(struct pci_bus *bus)
+{
+       if (IS_ENABLED(CONFIG_PCI_MSI)) {
+               struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+
+               if (!port)
+                       return;
+
+               xilinx_pcie_msi_chip.dev = port->dev;
+               bus->msi = &xilinx_pcie_msi_chip;
+       }
+}
+
+/**
+ * xilinx_pcie_scan_bus - Scan PCIe bus for devices
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: Valid Bus pointer on success and NULL on failure
+ */
+static struct pci_bus __init *xilinx_pcie_scan_bus(int nr,
+                               struct pci_sys_data *sys)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(sys);
+       struct pci_bus *bus;
+
+       if (port) {
+               port->root_busno = sys->busnr;
+               bus = pci_scan_root_bus(NULL, sys->busnr, &xilinx_pcie_ops,
+                                       sys, &sys->resources);
+       } else {
+               bus = NULL;
+               BUG();
+       }
+
+       return bus;
+}
+
+/**
+ * xilinx_pcie_map_irq - Get the interrupt of this port
+ * @dev: PCIe device
+ * @slot: Bridge slot
+ * @pin: Interrupt pin
+ *
+ * Return: Interrupt number on success and error value on failure
+ */
+static int xilinx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+       struct xilinx_pcie_port *port = sys_to_pcie(dev->bus->sysdata);
+
+       if (!port)
+               return -EINVAL;
+
+       return port->irq;
+}
+
+/**
+ * xilinx_pcie_intr_handler - Interrupt Service Handler
+ * @irq: IRQ number
+ * @data: PCIe port information
+ *
+ * Return: IRQ_HANDLED on success and IRQ_NONE on failure
+ */
+static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
+{
+       struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
+       u32 val, mask, status, msi_data;
+
+       /* Read interrupt decode and mask registers */
+       val = pcie_read(port, XILINX_PCIE_REG_IDR);
+       mask = pcie_read(port, XILINX_PCIE_REG_IMR);
+
+       status = val & mask;
+       if (!status)
+               return IRQ_NONE;
+
+       if (status & XILINX_PCIE_INTR_LINK_DOWN)
+               dev_warn(port->dev, "Link Down\n");
+
+       if (status & XILINX_PCIE_INTR_ECRC_ERR)
+               dev_warn(port->dev, "ECRC failed\n");
+
+       if (status & XILINX_PCIE_INTR_STR_ERR)
+               dev_warn(port->dev, "Streaming error\n");
+
+       if (status & XILINX_PCIE_INTR_HOT_RESET)
+               dev_info(port->dev, "Hot reset\n");
+
+       if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
+               dev_warn(port->dev, "ECAM access timeout\n");
+
+       if (status & XILINX_PCIE_INTR_CORRECTABLE) {
+               dev_warn(port->dev, "Correctable error message\n");
+               xilinx_pcie_clear_err_interrupts(port);
+       }
+
+       if (status & XILINX_PCIE_INTR_NONFATAL) {
+               dev_warn(port->dev, "Non fatal error message\n");
+               xilinx_pcie_clear_err_interrupts(port);
+       }
+
+       if (status & XILINX_PCIE_INTR_FATAL) {
+               dev_warn(port->dev, "Fatal error message\n");
+               xilinx_pcie_clear_err_interrupts(port);
+       }
+
+       if (status & XILINX_PCIE_INTR_INTX) {
+               /* INTx interrupt received */
+               val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+               /* Check whether interrupt valid */
+               if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+                       dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+                       return IRQ_HANDLED;
+               }
+
+               /* Check MSI or INTX */
+               if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) {
+                       if (val & XILINX_PCIE_RPIFR1_INTR_ASSRT)
+                               dev_dbg(port->dev, "INTx assert\n");
+                       else
+                               dev_dbg(port->dev, "INTx deassert\n");
+               }
+
+               /* Clear interrupt FIFO register 1 */
+               pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+                               XILINX_PCIE_REG_RPIFR1);
+       }
+
+       if (status & XILINX_PCIE_INTR_MSI) {
+               /* MSI Interrupt */
+               val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+               if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+                       dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+                       return IRQ_HANDLED;
+               }
+
+               if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
+                       msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
+                                       XILINX_PCIE_RPIFR2_MSG_DATA;
+
+                       /* Clear interrupt FIFO register 1 */
+                       pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+                               XILINX_PCIE_REG_RPIFR1);
+
+                       if (IS_ENABLED(CONFIG_PCI_MSI)) {
+                               /* Handle MSI Interrupt */
+                               generic_handle_irq(msi_data);
+                       }
+               }
+       }
+
+       if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
+               dev_warn(port->dev, "Slave unsupported request\n");
+
+       if (status & XILINX_PCIE_INTR_SLV_UNEXP)
+               dev_warn(port->dev, "Slave unexpected completion\n");
+
+       if (status & XILINX_PCIE_INTR_SLV_COMPL)
+               dev_warn(port->dev, "Slave completion timeout\n");
+
+       if (status & XILINX_PCIE_INTR_SLV_ERRP)
+               dev_warn(port->dev, "Slave Error Poison\n");
+
+       if (status & XILINX_PCIE_INTR_SLV_CMPABT)
+               dev_warn(port->dev, "Slave Completer Abort\n");
+
+       if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
+               dev_warn(port->dev, "Slave Illegal Burst\n");
+
+       if (status & XILINX_PCIE_INTR_MST_DECERR)
+               dev_warn(port->dev, "Master decode error\n");
+
+       if (status & XILINX_PCIE_INTR_MST_SLVERR)
+               dev_warn(port->dev, "Master slave error\n");
+
+       if (status & XILINX_PCIE_INTR_MST_ERRP)
+               dev_warn(port->dev, "Master error poison\n");
+
+       /* Clear the Interrupt Decode register */
+       pcie_write(port, status, XILINX_PCIE_REG_IDR);
+
+       return IRQ_HANDLED;
+}
+
+/**
+ * xilinx_pcie_init_port - Initialize hardware
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_init_port(struct xilinx_pcie_port *port)
+{
+       int err;
+       u32 val, last, first = 0;
+
+       port->reg_base = devm_ioremap(port->dev, port->phys_reg_base,
+                                       port->reg_size);
+       if (!port->reg_base)
+               return -ENOMEM;
+
+       /* make sure it is root port before touching header */
+       pcie_write(port, PCI_COMMAND_MASTER, PCI_COMMAND);
+
+       /* Check if PCIe link is up? */
+       port->link_up = xilinx_pcie_is_link_up(port);
+       if (!port->link_up)
+               dev_info(port->dev, "PCIe Link is DOWN\n");
+       else
+               dev_info(port->dev, "PCIe Link is UP\n");
+
+       /* Disable all interrupts*/
+       pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
+                               XILINX_PCIE_REG_IMR);
+
+       /* Clear pending interrupts */
+       pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
+                       XILINX_PCIE_IMR_ALL_MASK,
+                       XILINX_PCIE_REG_IDR);
+
+       /* Enable all interrupts*/
+       pcie_write(port, XILINX_PCIE_IMR_ALL_MASK,
+                       XILINX_PCIE_REG_IMR);
+
+       /* Enable the 'Bridge enable' bit */
+       pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
+                       XILINX_PCIE_REG_RPSC_BEN, XILINX_PCIE_REG_RPSC);
+
+       /* Register Interrupt Handler */
+       err = request_irq(port->irq, xilinx_pcie_intr_handler,
+                               IRQF_SHARED, "xilinx-pcie", port);
+       if (err) {
+               dev_err(port->dev,
+                       "Could not allocate interrupt %d\n", port->irq);
+               return err;
+       }
+
+       /* Get last bus number */
+       val = pcie_read(port, XILINX_PCIE_REG_BIR);
+       last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
+               XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
+
+       /* Write primary, secondary and subordinate bus numbers */
+       val = pcie_read(port, PCI_PRIMARY_BUS) & PCI_LATENCY_TIMER_MASK;
+       val |= first;
+       val |= (first + 1) << PCI_SECONDARY_BUS_NUM_SHIFT;
+       val |= last << PCI_SUBORDINATE_BUS_NUM_SHIFT;
+       pcie_write(port, val, PCI_PRIMARY_BUS);
+
+       return 0;
+}
+
+/**
+ * xilinx_pcie_parse_dt - Parse Device tree
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
+{
+       struct platform_device *pdev = to_platform_device(port->dev);
+       struct device_node *node = port->dev->of_node;
+       struct resource *io, res;
+       struct of_pci_range_parser parser;
+       struct of_pci_range range;
+
+       /* Request and map I/O memory */
+       io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       port->phys_reg_base = io->start;
+       port->reg_size = resource_size(io);
+
+       /* Map the IRQ */
+       port->irq = irq_of_parse_and_map(node, 0);
+       if (!port->irq) {
+               dev_err(port->dev, "Unable to get IRQ\n");
+               return -EINVAL;
+       }
+
+       if (of_pci_range_parser_init(&parser, node)) {
+               dev_err(port->dev, "missing \"ranges\" property\n");
+               return -EINVAL;
+       }
+
+       for_each_of_pci_range(&parser, &range) {
+               if (port->mem_resno >= XILINX_MAX_NUM_RESOURCES) {
+                       dev_err(port->dev, "Maximum memory resources 
exceeded\n");
+                       return -EINVAL;
+               }
+
+               of_pci_range_to_resource(&range, node, &res);
+
+               switch (res.flags & IORESOURCE_TYPE_BITS) {
+               case IORESOURCE_MEM:
+                       if (res.flags & IORESOURCE_PREFETCH)
+                               port->mem[port->mem_resno].name = "PREFETCH";
+                       else
+                               port->mem[port->mem_resno].name = "MEM";
+
+                       memcpy(&port->mem[port->mem_resno], &res, sizeof(res));
+                       port->mem_resno++;
+               /* Fallthrough */
+               default:
+                       break;
+               }
+       }
+
+       return 0;
+}
+
+/**
+ * xilinx_pcie_probe - Probe function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_probe(struct platform_device *pdev)
+{
+       struct xilinx_pcie_port *port;
+       struct hw_pci hw;
+       int err;
+
+       port = devm_kzalloc(&pdev->dev, sizeof(struct xilinx_pcie_port *),
+                                GFP_KERNEL);
+       if (!port)
+               return -ENOMEM;
+
+       port->dev = &pdev->dev;
+
+       /* Parse the device tree */
+       err = xilinx_pcie_parse_dt(port);
+       if (err) {
+               dev_err(port->dev, "Parsing DT failed\n");
+               return err;
+       }
+
+       /* Initialize the hardware */
+       err = xilinx_pcie_init_port(port);
+       if (err) {
+               dev_err(port->dev, "HW Initalization failed\n");
+               return err;
+       }
+
+       /* Setup MSI */
+       if (IS_ENABLED(CONFIG_PCI_MSI)) {
+               int i;
+
+               port->irq_domain = irq_domain_add_linear(port->dev->of_node,
+                                       XILINX_NUM_MSI_IRQS, &msi_domain_ops,
+                                       &xilinx_pcie_msi_chip);
+               if (!port->irq_domain) {
+                       dev_err(port->dev, "Failed to get an IRQ domain\n");
+                       return -ENXIO;
+               }
+
+               for (i = 0; i < XILINX_NUM_MSI_IRQS; i++)
+                       irq_create_mapping(port->irq_domain, i);
+
+               xilinx_pcie_enable_msi(port);
+       }
+
+       memset(&hw, 0, sizeof(hw));
+
+       hw.nr_controllers = 1;
+       hw.private_data = (void **)&port;
+       hw.setup = xilinx_pcie_setup;
+       hw.map_irq = xilinx_pcie_map_irq;
+       hw.add_bus = xilinx_pcie_add_bus;
+       hw.scan = xilinx_pcie_scan_bus;
+       hw.ops = &xilinx_pcie_ops;
+
+       /* Register the device */
+       pci_common_init_dev(port->dev, &hw);
+
+       platform_set_drvdata(pdev, port);
+
+       return 0;
+}
+
+/**
+ * xilinx_pcie_remove - Remove function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' always
+ */
+static int xilinx_pcie_remove(struct platform_device *pdev)
+{
+       struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
+
+       if (IS_ENABLED(CONFIG_PCI_MSI)) {
+               int i;
+               u32 irq;
+
+               free_pages(port->msg_addr, 0);
+
+               for (i = 0; i < XILINX_NUM_MSI_IRQS; i++) {
+                       irq = irq_find_mapping(port->irq_domain, i);
+                       if (irq > 0)
+                               irq_dispose_mapping(irq);
+               }
+
+               irq_domain_remove(port->irq_domain);
+       }
+
+       if (port->irq > 0)
+               free_irq(port->irq, port);
+
+       return 0;
+}
+
+static struct of_device_id xilinx_pcie_of_match[] = {
+       { .compatible = "xlnx,axi-pcie-host-1.00.a" ,},
+       {}
+};
+
+static struct platform_driver xilinx_pcie_driver = {
+       .driver = {
+               .name = "xilinx-pcie",
+               .owner = THIS_MODULE,
+               .of_match_table = xilinx_pcie_of_match,
+               .suppress_bind_attrs = true,
+       },
+       .probe = xilinx_pcie_probe,
+       .remove = xilinx_pcie_remove,
+};
+module_platform_driver(xilinx_pcie_driver);
+
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
+MODULE_LICENSE("GPLv2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to