Hi Joe,
On Wed, Mar 12, 2014 at 3:42 PM, Joe Perches <j...@perches.com> wrote:
> On Wed, 2014-03-12 at 15:15 -0500, Vince Bridgers wrote:
>> This patch adds the main driver and header file for the Altera Triple
>> Speed Ethernet driver.
> []
>> diff --git a/drivers/net/ethernet/altera/altera_tse.h
>> b/drivers/net/ethernet/altera/altera_tse.h
> []
>> +/* MAC register Space. Note that some of these registers may or may not be
>> + * present depending upon options chosen by the user when the core was
>> + * configured and built. Please consult the Altera Triple Speed Ethernet
>> User
>> + * Guide for details.
>> + */
>> +struct altera_tse_mac {
>> + /* Bits 15:0: MegaCore function revision (0x0800). Bit 31:16: Customer
>> + * specific revision
>> + */
>> + unsigned int megacore_revision;
>> + /* Provides a memory location for user applications to test the device
>> + * memory operation.
>> + */
>> + unsigned int scratch_pad;
>> + /* The host processor uses this register to control and configure the
>> + * MAC block
>> + */
>> + unsigned int command_config;
>> + /* 32-bit primary MAC address word 0 bits 0 to 31 of the primary
>> + * MAC address
>> + */
>> + unsigned int mac_addr_0;
>> + /* 32-bit primary MAC address word 1 bits 32 to 47 of the primary
>> + * MAC address
>> + */
>
> maybe all of these should be specifically sized using u32 like
>
> u32 mac_addr_0;
>
>
yes, I agree - that would be better. I'll pick this up in V5.
Cheers,
Vince
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
