On 03/20/2014 09:58 AM, Jean-Francois Moine wrote:
The I2C address (reg) is required for the TDA998x driver to be loaded
and initialized.
Signed-off-by: Jean-Francois Moine <moin...@free.fr>
---
This patch applies to linux-next.
---
Documentation/devicetree/bindings/drm/i2c/tda998x.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
index d7df01c..fc7effa 100644
--- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
+++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
@@ -3,6 +3,8 @@ Device-Tree bindings for the NXP TDA998x HDMI transmitter
Required properties;
- compatible: must be "nxp,tda998x"
+ - reg: I2C address - must be <0x70>
TDA9983b datasheet says:
"Bits A0 and A1 of the I2C-bus device address are externally selected
by pins A0 and A1."
Therefore, 0x70, 0x71, 0x72, and 0x73 are valid i2c addresses.
Sebastian
Optional properties:
- interrupts: interrupt number and trigger type
default: polling
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
