[Added MMC maintainers Chris and Ulf for one question below]
On 04/22/2014 10:27 AM, Antoine Ténart wrote:
> Add the SDHCI nodes for the Marvell Berlin BG2Q, using the mrvl,pxav3-mmc
> driver.
>
> Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
> ---
> arch/arm/boot/dts/berlin2q.dtsi | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 5925e6a16749..85d0ca5cc47a 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -67,6 +67,14 @@
> clock-div = <3>;
> };
>
> + sdio1clk: sdio1clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&syspll>;
> + clock-mult = <1>;
> + clock-div = <4>;
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -75,6 +83,30 @@
> ranges = <0 0xf7000000 0x1000000>;
> interrupt-parent = <&gic>;
>
> + sdhci0: sdhci@ab0000 {
> + compatible = "mrvl,pxav3-mmc";
> + reg = <0xab0000 0x200>;
> + clocks = <&sdio1clk>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + sdhci1: sdhci@ab0800 {
> + compatible = "mrvl,pxav3-mmc";
> + reg = <0xab0800 0x200>;
> + clocks = <&sdio1clk>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + sdhci2: sdhci@ab1000 {
Didn't Jisheng ask for sdhci2 being registered at mmc0?
Renaming the node labels will not help, but have you tried using an:
aliases {
mmc0 = &sdhci2;
mmc1 = &sdhci0;
mmc2 = &sdhci1;
};
node and set the platform_device's .id field with what you get
from of_alias_get_id(np, "mmc")?
@Chris, Ulf: Is there any generic alias, e.g. "sdhci", you prefer for
drivers/mmc so we can put it into sdhci_get_of_property()?
Sebastian
> + compatible = "mrvl,pxav3-mmc";
> + reg = <0xab1000 0x200>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdio1clk>;
> + status = "disabled";
> + };
> +
> l2: l2-cache-controller@ac0000 {
> compatible = "arm,pl310-cache";
> reg = <0xac0000 0x1000>;
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
