On 06/09/2014 06:04 PM, Boris BREZILLON wrote:
> The HLCDC IP available in some Atmel SoCs (i.e. sam9x5i.e. at91sam9n12,
> at91sam9x5 family or sama5d3 family) provide a PWM device.
>
> This driver add support for this PWM device.
>
> Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
> ---
> .../devicetree/bindings/pwm/atmel-hlcdc-pwm.txt | 40 ++++
> drivers/pwm/Kconfig | 9 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-atmel-hlcdc.c | 216
> +++++++++++++++++++++
> 4 files changed, 266 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> create mode 100644 drivers/pwm/pwm-atmel-hlcdc.c
>
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> new file mode 100644
> index 0000000..5e2ba87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> @@ -0,0 +1,40 @@
> +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) PWM driver
> +
> +The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
> +See Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt for more details.
> +
> +Required properties:
> + - compatible: value should be one of the following:
> + "atmel,hlcdc-pwm"
> + - pinctr-names: the pin control state names. Should contain "default".
> + - pinctrl-0: should contain the pinctrl states described by pinctrl
> + default.
> + - #pwm-cells: should be set to 3.
> +
> +Example:
> +
> + hlcdc: hlcdc@f0030000 {
> + compatible = "atmel,sama5d3-hlcdc";
> + reg = <0xf0030000 0x2000>;
> + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> + clock-names = "periph_clk","sys_clk", "slow_clk";
> + status = "disabled";
> +
> + hlcdc-display-controller {
> + compatible = "atmel,hlcdc-dc";
> + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> + pinctrl-names = "default", "rgb-444", "rgb-565",
> "rgb-666", "rgb-888";
> + pinctrl-0 = <&pinctrl_lcd_base>;
> + pinctrl-1 = <&pinctrl_lcd_base &pinctrl_lcd_rgb444>;
> + pinctrl-2 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> + pinctrl-3 = <&pinctrl_lcd_base &pinctrl_lcd_rgb666>;
> + pinctrl-4 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> + };
> +
> + hlcdc_pwm: hlcdc-pwm {
> + compatible = "atmel,hlcdc-pwm";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_pwm>;
> + #pwm-cells = <3>;
> + };
> + };
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 5b34ff2..7186242 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -50,6 +50,15 @@ config PWM_ATMEL
> To compile this driver as a module, choose M here: the module
> will be called pwm-atmel.
>
> +config PWM_ATMEL_HLCDC_PWM
> + tristate "Atmel HLCDC PWM support"
> + depends on MFD_ATMEL_HLCDC
I'd personnaly prefer a 'select' instead of 'depends on' here. Or maybe
the MFD driver should enabled y defaut for platforms supporting the hlcdc.
> + help
> + Generic PWM framework driver for Atmel HLCDC PWM.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-atmel.
> +
> config PWM_ATMEL_TCB
> tristate "Atmel TC Block PWM support"
> depends on ATMEL_TCLIB && OF
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index e57d2c3..a245519 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -2,6 +2,7 @@ obj-$(CONFIG_PWM) += core.o
> obj-$(CONFIG_PWM_SYSFS) += sysfs.o
> obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
> obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
> +obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
> obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
> obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
> obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
> diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
> new file mode 100644
> index 0000000..080e43e
> --- /dev/null
> +++ b/drivers/pwm/pwm-atmel-hlcdc.c
> @@ -0,0 +1,216 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezil...@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/mfd/atmel-hlcdc.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +
> +#define ATMEL_HLCDC_PWMCVAL_MASK (0xff << 8)
> +#define ATMEL_HLCDC_PWMCVAL(x) (((x) & 0xff) << 8)
> +#define ATMEL_HLCDC_PWMPOL BIT(4)
> +#define ATMEL_HLCDC_PWMPS_MASK 0x7
> +#define ATMEL_HLCDC_PWMPS_MAX 0x6
> +#define ATMEL_HLCDC_PWMPS(x) ((x) & 0x7)
> +
> +struct atmel_hlcdc_pwm_chip {
> + struct pwm_chip chip;
> + struct atmel_hlcdc *hlcdc;
> + struct clk *cur_clk;
> +};
> +
> +static inline struct atmel_hlcdc_pwm_chip *
> +pwm_chip_to_atmel_hlcdc_pwm_chip(struct pwm_chip *chip)
> +{
> + return container_of(chip, struct atmel_hlcdc_pwm_chip, chip);
> +}
> +
> +static int atmel_hlcdc_pwm_config(struct pwm_chip *c,
> + struct pwm_device *pwm,
> + int duty_ns, int period_ns)
> +{
> + struct atmel_hlcdc_pwm_chip *chip =
> + pwm_chip_to_atmel_hlcdc_pwm_chip(c);
> + struct atmel_hlcdc *hlcdc = chip->hlcdc;
> + struct clk *new_clk = hlcdc->slow_clk;
> + u64 pwmcval = duty_ns * 256;
> + unsigned long clk_freq;
> + u64 clk_period_ns;
> + u32 pwmcfg;
> + int pres;
> +
> + clk_freq = clk_get_rate(new_clk);
> + clk_period_ns = 1000000000;
> + clk_period_ns *= 256;
> + do_div(clk_period_ns, clk_freq);
> +
> + if (clk_period_ns > period_ns) {
> + new_clk = hlcdc->sys_clk;
> + clk_freq = clk_get_rate(new_clk);
> + clk_period_ns = 1000000000;
> + clk_period_ns *= 256;
> + do_div(clk_period_ns, clk_freq);
> + }
> +
> + for (pres = ATMEL_HLCDC_PWMPS_MAX; pres >= 0; pres--) {
> + if ((clk_period_ns << pres) <= period_ns)
> + break;
> + }
> +
> + if (pres > ATMEL_HLCDC_PWMPS_MAX)
> + return -EINVAL;
> +
> + pwmcfg = ATMEL_HLCDC_PWMPS(pres);
> +
> + if (new_clk != chip->cur_clk) {
> + u32 gencfg = 0;
> +
> + clk_prepare_enable(new_clk);
> + clk_disable_unprepare(chip->cur_clk);
> + chip->cur_clk = new_clk;
> +
> + if (new_clk != hlcdc->slow_clk)
> + gencfg = ATMEL_HLCDC_CLKPWMSEL;
> + regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0),
> + ATMEL_HLCDC_CLKPWMSEL, gencfg);
> + }
> +
> + do_div(pwmcval, period_ns);
> + if (pwmcval > 255)
> + pwmcval = 255;
> +
> + pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
> +
> + regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
> + ATMEL_HLCDC_PWMCVAL_MASK | ATMEL_HLCDC_PWMPS_MASK,
> + pwmcfg);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c,
> + struct pwm_device *pwm,
> + enum pwm_polarity polarity)
> +{
> + struct atmel_hlcdc_pwm_chip *chip =
> + pwm_chip_to_atmel_hlcdc_pwm_chip(c);
> + struct atmel_hlcdc *hlcdc = chip->hlcdc;
> + u32 cfg = 0;
> +
> + if (polarity == PWM_POLARITY_NORMAL)
> + cfg = ATMEL_HLCDC_PWMPOL;
> +
> + regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
> + ATMEL_HLCDC_PWMPOL, cfg);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_pwm_enable(struct pwm_chip *c,
> + struct pwm_device *pwm)
> +{
> + struct atmel_hlcdc_pwm_chip *chip =
> + pwm_chip_to_atmel_hlcdc_pwm_chip(c);
> + struct atmel_hlcdc *hlcdc = chip->hlcdc;
> + u32 status;
> +
> + regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM);
> + while (!regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status) &&
> + !(status & ATMEL_HLCDC_PWM))
> + cpu_relax();
> +
> + return 0;
> +}
> +
> +static void atmel_hlcdc_pwm_disable(struct pwm_chip *c,
> + struct pwm_device *pwm)
> +{
> + struct atmel_hlcdc_pwm_chip *chip =
> + pwm_chip_to_atmel_hlcdc_pwm_chip(c);
> + struct atmel_hlcdc *hlcdc = chip->hlcdc;
> + u32 status;
> +
> + regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM);
> + while (!regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status) &&
> + (status & ATMEL_HLCDC_PWM))
> + cpu_relax();
> +}
> +
> +static const struct pwm_ops atmel_hlcdc_pwm_ops = {
> + .config = atmel_hlcdc_pwm_config,
> + .set_polarity = atmel_hlcdc_pwm_set_polarity,
> + .enable = atmel_hlcdc_pwm_enable,
> + .disable = atmel_hlcdc_pwm_disable,
> + .owner = THIS_MODULE,
> +};
> +
> +static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
> +{
> + struct atmel_hlcdc_pwm_chip *chip;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + chip->hlcdc = dev_get_drvdata(dev->parent);
> + chip->chip.ops = &atmel_hlcdc_pwm_ops;
> + chip->chip.dev = dev;
> + chip->chip.base = -1;
> + chip->chip.npwm = 1;
> + chip->chip.of_xlate = of_pwm_xlate_with_flags;
> + chip->chip.of_pwm_n_cells = 3;
> + chip->chip.can_sleep = 1;
> +
> + ret = pwmchip_add(&chip->chip);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, chip);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
> +{
> + struct atmel_hlcdc_pwm_chip *chip = platform_get_drvdata(pdev);
> +
> + return pwmchip_remove(&chip->chip);
> +}
> +
> +static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
> + { .compatible = "atmel,hlcdc-pwm" },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver atmel_hlcdc_pwm_driver = {
> + .driver = {
> + .name = "atmel-hlcdc-pwm",
> + .of_match_table = atmel_hlcdc_pwm_dt_ids,
> + },
> + .probe = atmel_hlcdc_pwm_probe,
> + .remove = atmel_hlcdc_pwm_remove,
> +};
> +module_platform_driver(atmel_hlcdc_pwm_driver);
> +
> +MODULE_ALIAS("platform:atmel-hlcdc-pwm");
> +MODULE_AUTHOR("Boris Brezillon <boris.brezil...@free-electrons.com>");
> +MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
