On Thu, May 08, 2014 at 01:08:33AM +0200, Beniamino Galvani wrote: > This commit adds a driver for the PWM controller found on Rockchip > RK29, RK30 and RK31 SoCs. > > Signed-off-by: Beniamino Galvani <b.galv...@gmail.com> > --- > drivers/pwm/Kconfig | 8 ++ > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-rockchip.c | 180 > ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 189 insertions(+) > create mode 100644 drivers/pwm/pwm-rockchip.c > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig > index 5b34ff2..2e92245 100644 > --- a/drivers/pwm/Kconfig > +++ b/drivers/pwm/Kconfig > @@ -197,6 +197,14 @@ config PWM_RENESAS_TPU > To compile this driver as a module, choose M here: the module > will be called pwm-renesas-tpu. > > +config PWM_ROCKCHIP > + tristate "Rockchip PWM support" > + depends on ARCH_ROCKCHIP > + depends on OF
It seems like ARCH_ROCKCHIP depends on OF already (via ARCH_MULTI_V7 and
ARCH_MULTIPLATFORM), so having the dependency explicitly here seems
redundant.
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
[...]
> +#define PRESCALER 2
> +#define NSECS_PER_SEC 1000000000
You should use NSEC_PER_SEC from include/linux/time.h.
> +struct rockchip_pwm_chip {
> + struct pwm_chip chip;
> + struct clk *clk;
> + void __iomem *base;
> +};
I prefer no artificial padding within structure definitions.
> +static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> + int duty_ns, int period_ns)
> +{
> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> + unsigned long clk_rate, period, duty;
> + u64 div;
> + int ret;
> +
> + clk_rate = clk_get_rate(pc->clk);
> +
> + /*
> + * Since period and duty cycle registers have a width of 32
> + * bits, every possible input period can be obtained using the
> + * default prescaler value for all practical clock rate values.
> + */
> + div = clk_rate;
> + div *= period_ns;
Perhaps shorten this to "div = clk_rate * period_ns;"?
> + do_div(div, PRESCALER * NSECS_PER_SEC);
> + period = div;
> +
> + div = clk_rate;
> + div *= duty_ns;
And this to "div = clk_rate * duty_ns;"?
> + do_div(div, PRESCALER * NSECS_PER_SEC);
> + duty = div;
> +
> + ret = clk_enable(pc->clk);
> + if (ret)
> + return ret;
> +
> + writel(period, pc->base + PWM_LRC);
> + writel(duty, pc->base + PWM_HRC);
> + writel(0, pc->base + PWM_CNTR);
> +
> + clk_disable(pc->clk);
> +
> + return 0;
> +}
[...]
> +static struct pwm_ops rockchip_pwm_ops = {
static const please.
> + .config = rockchip_pwm_config,
There's a tab between .config and = above. It should be a space.
> +static const struct of_device_id rockchip_pwm_dt_ids[] = {
> + { .compatible = "rockchip,rk2928-pwm" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_pwm_id_ids);
The name in the MODULE_DEVICE_TABLE doesn't match the array name above.
Does this even build?
> +static struct platform_driver rockchip_pwm_driver = {
> + .driver = {
> + .name = "rockchip-pwm",
> + .owner = THIS_MODULE,
You no longer need to initialize this explicitly, module_platform_driver
does it for you.
> + .of_match_table = rockchip_pwm_dt_ids,
> + },
> + .probe = rockchip_pwm_probe,
There's another tab instead of space here.
> + .remove = rockchip_pwm_remove,
> +};
> +module_platform_driver(rockchip_pwm_driver);
> +
> +MODULE_AUTHOR("Beniamino Galvani <b.galv...@gmail.com>");
> +MODULE_DESCRIPTION("Rockchip PWM driver");
Perhaps "Rockchip SoC PWM driver"?
Thierry
pgpqbdkoFQlwV.pgp
Description: PGP signature
