Hi Rob,
> Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
> add necessary DT support so that we can use drm/msm on upstream kernel.
>
> Signed-off-by: Rob Clark <robdcl...@gmail.com>
> ---
> Commence bikeshedding :-)
>
<snip>
> diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
> b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
> new file mode 100644
> index 0000000..051a49f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
> @@ -0,0 +1,43 @@
> +Qualcomm adreno/snapdragon hdmi output
> +
> +Required properties:
> +- compatible: "qcom,hdmi-tx-8x60", "qcom,hdmi-tx-8960",
> "qcom,hdmi-tx-8x74"
> +- reg: Physical base address and length of the controller's registers.
Since you are adding "qcom,hdmi-tx-8x74" (separate address space for PHY
registers) in the compatible entry, how about this for the register
description:
- reg: Physical base address and length of the controllers' registers.
- reg-names: names corresponding to the defined register sets,
- "core_physical": HDMI Core registers
- (optional) "phy_physical": HDMI PHY registers
> +- interrupts: The interrupt outputs from the controller.
> +- clocks: device clocks
> + See ../clocks/clock-bindings.txt for details.
> +- qcom,hdmi-tx-ddc-clk: ddc clk pin
> +- qcom,hdmi-tx-ddc-data: ddc data pin
> +- qcom,hdmi-tx-hpd: hpd pin
> +- core-vdda-supply: phandle to supply regulator
> +- hdmi-mux-supply: phandle to mux regulator
> +
> +Optional properties:
> +- qcom,hdmi-tx-mux-en: hdmi mux enable pin
> +- qcom,hdmi-tx-mux-sel: hdmi mux select pin
> +
> +Example:
> +
> +/ {
> + ...
> +
> + hdmi: qcom,hdmi-tx-8960@4a00000 {
> + compatible = "qcom,hdmi-tx-8960";
> + reg-names = "core_physical";
> + reg = <0x04a00000 0x1000>;
> + interrupts = <GIC_SPI 79 0>;
> + clock-names =
> + "core_clk",
> + "master_iface_clk",
> + "slave_iface_clk";
> + clocks =
> + <&mmcc HDMI_APP_CLK>,
> + <&mmcc HDMI_M_AHB_CLK>,
> + <&mmcc HDMI_S_AHB_CLK>;
> + qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
> + qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
> + qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
> + core-vdda-supply = <&pm8921_hdmi_mvs>;
> + hdmi-mux-supply = <&ext_3p3v>;
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/drm/msm/msm.txt
b/Documentation/devicetree/bindings/drm/msm/msm.txt
> new file mode 100644
> index 0000000..484cc12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/msm/msm.txt
> <at> <at> -0,0 +1,40 <at> <at>
> +Qualcomm adreno/snapdragon
> +
> +Required properties:
> +- compatible: "qcom,mdp" (mdp4) or "qcom,mdss_mdp" (mdp5)
> +- reg: Physical base address and length of the controller's registers.
As per the code (mdp5_kms.c), there are two sets of registers: "mdp_phys"
and "vbif_phys". They should probably be added in the description here.
"reg-names" entry might be needed as well.
> +- interrupts: The interrupt outputs from the controller.
> +- connectors: array of phandles for output device(s)
> +- clocks: device clocks
> + See ../clocks/clock-bindings.txt for details.
> +
> +Optional properties:
> +- gpus: phandle for gpu device
> +
> +Example:
> +
> +/ {
> + ...
> +
> + mdp: qcom,mdp <at> 5100000 {
> + compatible = "qcom,mdp";
> + reg = <0x05100000 0xf0000>;
> + interrupts = <GIC_SPI 75 0>;
> + connectors = <&hdmi>;
> + gpus = <&gpu>;
> + clock-names =
> + "core_clk",
> + "iface_clk",
> + "lut_clk",
> + "src_clk",
> + "hdmi_clk",
> + "mdp_clk";
> + clocks =
> + <&mmcc MDP_SRC>,
> + <&mmcc MDP_AHB_CLK>,
> + <&mmcc MDP_LUT_CLK>,
> + <&mmcc TV_SRC>,
> + <&mmcc HDMI_TV_CLK>,
> + <&mmcc MDP_TV_CLK>;
> + };
> +};
<snip>
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c
b/drivers/gpu/drm/msm/hdmi/hdmi.c
> index 7f7aade..0ff8d46 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
<snip>
> <at> <at> -273,24 +275,37 <at> <at> static int hdmi_bind(struct
device *dev, struct device *master, void *data)
> return gpio;
> }
>
> - /* TODO actually use DT.. */
> - static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
> - static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
> - static const char *hpd_clk_names[] = {"iface_clk", "core_clk",
"mdp_core_clk"};
> - static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
> - static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
> + if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8x74")) {
> + static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
> + static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
> + static const char *hpd_clk_names[] = {"iface_clk", "core_clk",
"mdp_core_clk"};
> + static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
> + static const char *pwr_clk_names[] = {"extp_clk",
> "alt_iface_clk"};
> + config.phy_init = hdmi_phy_8x74_init;
> + config.hpd_reg_names = hpd_reg_names;
> + config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
> + config.pwr_reg_names = pwr_reg_names;
> + config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names);
> + config.hpd_clk_names = hpd_clk_names;
> + config.hpd_freq = hpd_clk_freq;
> + config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
> + config.pwr_clk_names = pwr_clk_names;
> + config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names);
> + } else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8960")) {
> + static const char *hpd_clk_names[] = {"core_clk",
> "master_iface_clk",
"slave_iface_clk"};
> + static const char *hpd_reg_names[] = {"core-vdda", "hdmi-mux"};
> + config.phy_init = hdmi_phy_8960_init;
> + config.hpd_reg_names = hpd_reg_names;
> + config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
> + config.hpd_clk_names = hpd_clk_names;
> + config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
> + } else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8x60")) {
> + config.phy_init = hdmi_phy_8x60_init;
> + } else {
> + dev_err(dev, "unknown phy: %s\n", of_node->name);
> + }
Stéphane.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
