Hello. On 07/18/2014 04:30 PM, Antoine Ténart wrote:
The Berlin SATA PHY drives the PHY related to the SATA interface. Add the corresponding documentation.
Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com> --- .../devicetree/bindings/phy/berlin-sata-phy.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt new file mode 100644 index 000000000000..88f8c23384c0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt @@ -0,0 +1,34 @@ +Berlin SATA PHY +--------------- + +Required properties: +- compatible: should be "marvell,berlin2q-sata-phy" +- address-cells: should be 1 +- size-cells: should be 0 +- phy-cells: from the generic PHY bindings, must be 1
It's "#address-cells", "#size-cells", and "#phy-cells".
+- reg: address and length of the register +- clocks: reference to the clock entry + +Sub-nodes: +Each PHY should be represented as a sub-node.
Then "#phy-cells" should also belong to the sub-nodes.
+ +Sub-nodes required properties: +- reg: the PHY number
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
