On 07/25/2014 02:43 PM, Chen-Yu Tsai wrote:
This patch introduces the driver for the RTC in the Allwinner A31 and
A23 SoCs.
Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the
RTC in A31/A23 are a separate hardware block, which also contain a few
controls for the RTC block hardware (a regulator and RTC block GPIO pin
latches), while also having separate interrupts for the alarms.
The hardware is different enough to make a different driver for it.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
.../devicetree/bindings/rtc/sun6i-rtc.txt | 17 +
drivers/rtc/Kconfig | 7 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-sun6i.c | 447 +++++++++++++++++++++
4 files changed, 472 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
create mode 100644 drivers/rtc/rtc-sun6i.c
(....)
+static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+ u32 date = 0;
+ u32 time = 0;
+ int year;
+
+ year = rtc_tm->tm_year + 1900;
+ if (year < SUN6I_YEAR_MIN || year > SUN6I_YEAR_MAX) {
+ dev_err(dev, "rtc only supports year in range %d - %d\n",
+ SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
dev_err(dev, "rtc only supports year in range %d - %d\n",
SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
+ return -EINVAL;
+ }
+
+ rtc_tm->tm_year -= SUN6I_YEAR_OFF;
+ rtc_tm->tm_mon += 1;
+
+ date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+ SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
+ SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
+
+ if (is_leap_year(year))
+ date |= SUN6I_LEAP_SET_VALUE(1);
+
+ time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
+ SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
+ SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
+
+ /* Check whether registers are writable */
+ if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+ SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
SUN6I_LOSC_CTRL_ACC_MASK, 50)
+ dev_err(dev, "rtc is still busy.\n");
+ return -EBUSY;
+ }
+
+ writel(time, chip->base + SUN6I_RTC_HMS);
+
+ /*
+ * After writing the RTC HH-MM-SS register, the
+ * SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
+ * be cleared until the real writing operation is finished
+ */
+
+ if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+ SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
same..
+ dev_err(dev, "Failed to set rtc time.\n");
+ return -ETIMEDOUT;
+ }
+
+ writel(date, chip->base + SUN6I_RTC_YMD);
+
+ /*
+ * After writing the RTC YY-MM-DD register, the
+ * SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
+ * be cleared until the real writing operation is finished
+ */
+
+ if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+ SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
same...
--
Regards,
Varka Bhadram.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html