On Thursday 24 July 2014 02:47 PM, Antoine Ténart wrote:
> The current implementation of the libahci does not allow to use multiple
> PHYs. This patch adds the support of multiple PHYs by the libahci while
> keeping the old bindings valid for device tree compatibility.
> 
> This introduce a new way of defining SATA ports in the device tree, with
> one port per sub-node. This as the advantage of allowing a per port
> configuration. Because some ports may be accessible but disabled in the
> device tree, the port_map mask is computed automatically when using
> this.
> 
> Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>

FWIW:
Acked-by: Kishon Vijay Abraham I <kis...@ti.com>
> ---
>  drivers/ata/ahci.h             |   7 +-
>  drivers/ata/libahci_platform.c | 190 
> ++++++++++++++++++++++++++++++++---------
>  2 files changed, 157 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index cb8d58926851..47de53284ad7 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -332,7 +332,12 @@ struct ahci_host_priv {
>       bool                    got_runtime_pm; /* Did we do pm_runtime_get? */
>       struct clk              *clks[AHCI_MAX_CLKS]; /* Optional */
>       struct regulator        *target_pwr;    /* Optional */
> -     struct phy              *phy;           /* If platform uses phy */
> +     /*
> +      * If platform uses PHYs. There is a 1:1 relation between the port 
> number and
> +      * the PHY position in this array.
> +      */
> +     struct phy              **phys;
> +     unsigned                nports;         /* Number of ports */
>       void                    *plat_data;     /* Other platform data */
>       /*
>        * Optional ahci_start_engine override, if not set this gets set to the
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index db9b90d876dd..095df56432d9 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -39,6 +39,67 @@ static struct scsi_host_template ahci_platform_sht = {
>  };
>  
>  /**
> + * ahci_platform_enable_phys - Enable PHYs
> + * @hpriv: host private area to store config values
> + *
> + * This function enables all the PHYs found in hpriv->phys, if any.
> + * If a PHY fails to be enabled, it disables all the PHYs already
> + * enabled in reverse order and returns an error.
> + *
> + * RETURNS:
> + * 0 on success otherwise a negative error code
> + */
> +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
> +{
> +     int rc, i;
> +
> +     for (i = 0; i < hpriv->nports; i++) {
> +             if (!hpriv->phys[i])
> +                     continue;
> +
> +             rc = phy_init(hpriv->phys[i]);
> +             if (rc)
> +                     goto disable_phys;
> +
> +             rc = phy_power_on(hpriv->phys[i]);
> +             if (rc) {
> +                     phy_exit(hpriv->phys[i]);
> +                     goto disable_phys;
> +             }
> +     }
> +
> +     return 0;
> +
> +disable_phys:
> +     while (--i >= 0) {
> +             phy_power_off(hpriv->phys[i]);
> +             phy_exit(hpriv->phys[i]);
> +     }
> +     return rc;
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
> +
> +/**
> + * ahci_platform_disable_phys - Enable PHYs
> + * @hpriv: host private area to store config values
> + *
> + * This function disables all PHYs found in hpriv->phys.
> + */
> +void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
> +{
> +     int i;
> +
> +     for (i = 0; i < hpriv->nports; i++) {
> +             if (!hpriv->phys[i])
> +                     continue;
> +
> +             phy_power_off(hpriv->phys[i]);
> +             phy_exit(hpriv->phys[i]);
> +     }
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
> +
> +/**
>   * ahci_platform_enable_clks - Enable platform clocks
>   * @hpriv: host private area to store config values
>   *
> @@ -92,7 +153,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
>   * following order:
>   * 1) Regulator
>   * 2) Clocks (through ahci_platform_enable_clks)
> - * 3) Phy
> + * 3) Phys
>   *
>   * If resource enabling fails at any point the previous enabled resources
>   * are disabled in reverse order.
> @@ -114,17 +175,9 @@ int ahci_platform_enable_resources(struct ahci_host_priv 
> *hpriv)
>       if (rc)
>               goto disable_regulator;
>  
> -     if (hpriv->phy) {
> -             rc = phy_init(hpriv->phy);
> -             if (rc)
> -                     goto disable_clks;
> -
> -             rc = phy_power_on(hpriv->phy);
> -             if (rc) {
> -                     phy_exit(hpriv->phy);
> -                     goto disable_clks;
> -             }
> -     }
> +     rc = ahci_platform_enable_phys(hpriv);
> +     if (rc)
> +             goto disable_clks;
>  
>       return 0;
>  
> @@ -144,16 +197,13 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
>   *
>   * This function disables all ahci_platform managed resources in the
>   * following order:
> - * 1) Phy
> + * 1) Phys
>   * 2) Clocks (through ahci_platform_disable_clks)
>   * 3) Regulator
>   */
>  void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
>  {
> -     if (hpriv->phy) {
> -             phy_power_off(hpriv->phy);
> -             phy_exit(hpriv->phy);
> -     }
> +     ahci_platform_disable_phys(hpriv);
>  
>       ahci_platform_disable_clks(hpriv);
>  
> @@ -187,7 +237,7 @@ static void ahci_platform_put_resources(struct device 
> *dev, void *res)
>   * 2) regulator for controlling the targets power (optional)
>   * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
>   *    or for non devicetree enabled platforms a single clock
> - *   4) phy (optional)
> + *   4) phys (optional)
>   *
>   * RETURNS:
>   * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
> @@ -197,7 +247,9 @@ struct ahci_host_priv *ahci_platform_get_resources(struct 
> platform_device *pdev)
>       struct device *dev = &pdev->dev;
>       struct ahci_host_priv *hpriv;
>       struct clk *clk;
> -     int i, rc = -ENOMEM;
> +     struct device_node *child;
> +     int i, enabled_ports = 0, rc = -ENOMEM;
> +     u32 mask_port_map = 0;
>  
>       if (!devres_open_group(dev, NULL, GFP_KERNEL))
>               return ERR_PTR(-ENOMEM);
> @@ -246,27 +298,87 @@ struct ahci_host_priv 
> *ahci_platform_get_resources(struct platform_device *pdev)
>               hpriv->clks[i] = clk;
>       }
>  
> -     hpriv->phy = devm_phy_get(dev, "sata-phy");
> -     if (IS_ERR(hpriv->phy)) {
> -             rc = PTR_ERR(hpriv->phy);
> -             switch (rc) {
> -             case -ENOSYS:
> -                     /* No PHY support. Check if PHY is required. */
> -                     if (of_find_property(dev->of_node, "phys", NULL)) {
> -                             dev_err(dev, "couldn't get sata-phy: ENOSYS\n");
> +     hpriv->nports = of_get_child_count(dev->of_node);
> +
> +     if (hpriv->nports) {
> +             hpriv->phys = devm_kzalloc(dev,
> +                                        hpriv->nports * sizeof(*hpriv->phys),
> +                                        GFP_KERNEL);
> +             if (!hpriv->phys) {
> +                     rc = -ENOMEM;
> +                     goto err_out;
> +             }
> +
> +             for_each_child_of_node(dev->of_node, child) {
> +                     u32 port;
> +
> +                     if (!of_device_is_available(child))
> +                             continue;
> +
> +                     if (of_property_read_u32(child, "reg", &port)) {
> +                             rc = -EINVAL;
>                               goto err_out;
>                       }
> -             case -ENODEV:
> -                     /* continue normally */
> -                     hpriv->phy = NULL;
> -                     break;
>  
> -             case -EPROBE_DEFER:
> -                     goto err_out;
> +                     if (port >= hpriv->nports) {
> +                             dev_warn(dev, "invalid port number %d\n", port);
> +                             continue;
> +                     }
>  
> -             default:
> -                     dev_err(dev, "couldn't get sata-phy\n");
> -                     goto err_out;
> +                     mask_port_map |= BIT(port);
> +
> +                     hpriv->phys[port] = devm_of_phy_get(dev, child, NULL);
> +                     if (IS_ERR(hpriv->phys[port])) {
> +                             rc = PTR_ERR(hpriv->phys[port]);
> +                             dev_err(dev,
> +                                     "couldn't get PHY in node %s: %d\n",
> +                                     child->name, rc);
> +                             goto err_out;
> +                     }
> +
> +                     enabled_ports++;
> +             }
> +             if (!enabled_ports) {
> +                     dev_warn(dev, "No port enabled\n");
> +                     return ERR_PTR(-ENODEV);
> +             }
> +
> +             if (!hpriv->mask_port_map)
> +                     hpriv->mask_port_map = mask_port_map;
> +     } else {
> +             /*
> +              * If no sub-node was found, keep this for device tree
> +              * compatibility
> +              */
> +             struct phy *phy = devm_phy_get(dev, "sata-phy");
> +             if (!IS_ERR(phy)) {
> +                     hpriv->phys = devm_kzalloc(dev, sizeof(*hpriv->phys),
> +                                                GFP_KERNEL);
> +                     if (!hpriv->phys) {
> +                             rc = -ENOMEM;
> +                             goto err_out;
> +                     }
> +
> +                     hpriv->phys[0] = phy;
> +                     hpriv->nports = 1;
> +             } else {
> +                     rc = PTR_ERR(phy);
> +                     switch (rc) {
> +                             case -ENOSYS:
> +                                     /* No PHY support. Check if PHY is 
> required. */
> +                                     if (of_find_property(dev->of_node, 
> "phys", NULL)) {
> +                                             dev_err(dev, "couldn't get 
> sata-phy: ENOSYS\n");
> +                                             goto err_out;
> +                                     }
> +                             case -ENODEV:
> +                                     /* continue normally */
> +                                     hpriv->phys = NULL;
> +                                     break;
> +
> +                             default:
> +                                     goto err_out;
> +
> +                     }
>               }
>       }
>  
> @@ -291,7 +403,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
>   * @host_flags: ahci host flags used in ahci_host_priv
>   *
>   * This function does all the usual steps needed to bring up an
> - * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
> + * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
>   * must be initialized / enabled before calling this.
>   *
>   * RETURNS:
> @@ -395,7 +507,7 @@ static void ahci_host_stop(struct ata_host *host)
>   * @dev: device pointer for the host
>   *
>   * This function does all the usual steps needed to suspend an
> - * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
> + * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
>   * must be disabled after calling this.
>   *
>   * RETURNS:
> @@ -432,7 +544,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
>   * @dev: device pointer for the host
>   *
>   * This function does all the usual steps needed to resume an ahci-platform
> - * host, note any necessary resources (ie clks, phy, etc.)  must be
> + * host, note any necessary resources (ie clks, phys, etc.)  must be
>   * initialized / enabled before calling this.
>   *
>   * RETURNS:
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to