On Tuesday 05 August 2014 07:58 PM, Brian Austin wrote:
On Mon, 4 Aug 2014, Varka Bhadram wrote:
+ 0 = Left/right channels VMON[11:0], IMON[11:0], VPMON[7:0].
+ 1 = Left/right channels VMON[11:0], IMON[11:0], STATUS.
+ 2 = (Default) left/right channels VMON[15:0], IMON [15:0].
+ 3 = Left/right channels VPMON[7:0], STATUS.
+
+ - cirrus,sdout-share : SDOUT sharing. Determines whether one or two
CS35L32
+ devices are on board sharing SDOUT.
+ 0 = (Default) One IC.
+ 1 = Two IC's.
+
+ - cirrus,battery-recovery : Low battery nominal recovery threshold,
rising VP.
+ 0 = 3.1V
+ 1 = 3.2V
+ 2 = 3.3V (Default)
+ 3 = 3.4V
+
+ - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
+ 0 = 3.1V
+ 1 = 3.2V
+ 2 = 3.3V
+ 3 = 3.4V (Default)
+ 4 = 3.5V
+ 5 = 3.6V
+
Proper indentation for all the properties... These are not readable like
this...
Required properties:
- compatible: "cirrus,cs35l32"
- reg: the I2C address of the device for I2C. Address
is
determined by the level
of the AD0 pin. Level 0 is 0x40 while Level 1 is 0x41.
- VA-supply,VP-supply: power supplies for the device,
as covered in
Documentation/devicetree/bindings/regulator/regulator.txt.
Optional properties:
- reset-gpios: a GPIO spec for the reset pin. If specified, it
will
be
deasserted before communication to the codec starts.
- cirrus,boost-manager:Boost voltage control.
0 = Automatically managed.
Boost-converter output voltage is the higher
of the two: Class G or adaptive LED voltage.
1 = Automatically managed irrespective of audio,
adapting for low-power
--
Regards,
Varka Bhadram.
Well when I look at your example that makes it more difficult for me to
read ;)
sorry... this the problem due to my email client...
I think if there is a mandatory style we are looking for I would expect it
to be documented. Maybe I have missed that? I take my bindings file from
examples already in the mainline and find this to be acceptable and
readable for me.
see this
ex:http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/sound/adi,adau1701.txt
--
-Varka Bhadram
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
