On Thu, Aug 21, 2014 at 05:24:44PM +0800, Zhangfei Gao wrote:
> From: Guoxiong Yan <[email protected]>
>
> IR transmitter driver for Hisilicon hix5hd2 soc
>
> Signed-off-by: Guoxiong Yan <[email protected]>
> Signed-off-by: Zhangfei Gao <[email protected]>
> ---
> drivers/media/rc/Kconfig | 11 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/ir-hix5hd2.c | 347
> +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 359 insertions(+)
> create mode 100644 drivers/media/rc/ir-hix5hd2.c
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 5e626af..64dc8bb 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -164,6 +164,17 @@ config IR_ENE
> To compile this driver as a module, choose M here: the
> module will be called ene_ir.
>
> +config IR_HIX5HD2
> + tristate "Hisilicon hix5hd2 IR remote control"
> + depends on RC_CORE
> + help
> + Say Y here if you want to use hisilicon remote control.
> + The driver passes raw pulse and space information to the LIRC decoder.
> + To compile this driver as a module, choose M here: the module will be
> + called hisi_ir.
> +
> + If you're not sure, select N here
> +
> config IR_IMON
> tristate "SoundGraph iMON Receiver and Display"
> depends on USB_ARCH_HAS_HCD
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 9f9843a1..0989f94 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_IR_XMP_DECODER) += ir-xmp-decoder.o
>
> # stand-alone IR receivers/transmitters
> obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
> +obj-$(CONFIG_IR_HIX5HD2) += ir-hix5hd2.o
> obj-$(CONFIG_IR_IMON) += imon.o
> obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
> obj-$(CONFIG_IR_MCEUSB) += mceusb.o
> diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
> new file mode 100644
> index 0000000..543b454
> --- /dev/null
> +++ b/drivers/media/rc/ir-hix5hd2.c
> @@ -0,0 +1,347 @@
> +/*
> + * Copyright (c) 2014 Linaro Ltd.
> + * Copyright (c) 2014 Hisilicon Limited.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <media/rc-core.h>
> +
> +#define IR_ENABLE 0x00
> +#define IR_CONFIG 0x04
> +#define CNT_LEADS 0x08
> +#define CNT_LEADE 0x0c
> +#define CNT_SLEADE 0x10
> +#define CNT0_B 0x14
> +#define CNT1_B 0x18
> +#define IR_BUSY 0x1c
> +#define IR_DATAH 0x20
> +#define IR_DATAL 0x24
> +#define IR_INTM 0x28
> +#define IR_INTS 0x2c
> +#define IR_INTC 0x30
> +#define IR_START 0x34
> +
> +/* interrupt mask */
> +#define INTMS_SYMBRCV (BIT(24) | BIT(8))
> +#define INTMS_TIMEOUT (BIT(25) | BIT(9))
> +#define INTMS_OVERFLOW (BIT(26) | BIT(10))
> +#define INT_CLR_OVERFLOW BIT(18)
> +#define INT_CLR_TIMEOUT BIT(17)
> +#define INT_CLR_RCV BIT(16)
> +#define INT_CLR_RCVTIMEOUT (BIT(16) | BIT(17))
> +
> +#define IR_CLK 0x48
> +#define IR_CLK_ENABLE BIT(4)
> +#define IR_CLK_RESET BIT(5)
> +
> +#define IR_CFG_WIDTH_MASK 0xffff
> +#define IR_CFG_WIDTH_SHIFT 16
> +#define IR_CFG_FORMAT_MASK 0x3
> +#define IR_CFG_FORMAT_SHIFT 14
> +#define IR_CFG_INT_LEVEL_MASK 0x3f
> +#define IR_CFG_INT_LEVEL_SHIFT 8
> +/* only support raw mode */
> +#define IR_CFG_MODE_RAW BIT(7)
> +#define IR_CFG_FREQ_MASK 0x7f
> +#define IR_CFG_FREQ_SHIFT 0
> +#define IR_CFG_INT_THRESHOLD 1
> +/* symbol start from low to high, symbol stream end at high*/
> +#define IR_CFG_SYMBOL_FMT 0
> +#define IR_CFG_SYMBOL_MAXWIDTH 0x3e80
> +
> +#define IR_HIX5HD2_NAME "hix5hd2-ir"
> +
> +struct hix5hd2_ir_priv {
> + int irq;
> + void *base;
> + struct device *dev;
> + struct rc_dev *rdev;
> + struct regmap *regmap;
> + struct clk *clock;
> + unsigned long rate;
> +};
> +
> +static void hix5hd2_ir_send_lirc_timeout(struct rc_dev *rdev)
> +{
> + DEFINE_IR_RAW_EVENT(ev);
> +
> + ev.timeout = true;
> + ir_raw_event_store(rdev, &ev);
> +}
> +
> +static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
> +{
> + u32 symb_num, symb_val, symb_time;
> + u32 data_l, data_h;
> + u32 irq_sr, i;
> + struct hix5hd2_ir_priv *priv = data;
> +
> + irq_sr = readl_relaxed(priv->base + IR_INTS);
> + if (irq_sr & INTMS_OVERFLOW) {
> + /*
> + * we must read IR_DATAL first, then we can clean up
> + * IR_INTS availably since logic would not clear
> + * fifo when overflow, drv do the job
> + */
> + ir_raw_event_reset(priv->rdev);
> + symb_num = readl_relaxed(priv->base + IR_DATAH);
> + for (i = 0; i < symb_num; i++)
> + readl_relaxed(priv->base + IR_DATAL);
> +
> + writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC);
> + dev_info(priv->dev, "overflow, level=%d\n",
> + IR_CFG_INT_THRESHOLD);
> + }
> +
> + if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) {
> + DEFINE_IR_RAW_EVENT(ev);
> +
> + symb_num = readl_relaxed(priv->base + IR_DATAH);
> + for (i = 0; i < symb_num; i++) {
> + symb_val = readl_relaxed(priv->base + IR_DATAL);
> + data_l = ((symb_val & 0xffff) * 10);
> + data_h = ((symb_val >> 16) & 0xffff) * 10;
> + symb_time = (data_l + data_h) / 10;
> +
> + ev.duration = US_TO_NS(data_l);
> + ev.pulse = true;
> + ir_raw_event_store(priv->rdev, &ev);
> +
> + if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
> + ev.duration = US_TO_NS(data_h);
> + ev.pulse = false;
> + ir_raw_event_store(priv->rdev, &ev);
> + } else {
> + hix5hd2_ir_send_lirc_timeout(priv->rdev);
> + }
> + }
> +
> + if (irq_sr & INTMS_SYMBRCV)
> + writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC);
> + if (irq_sr & INTMS_TIMEOUT)
> + writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC);
> + }
> +
> + /* Empty software fifo */
> + ir_raw_event_handle(priv->rdev);
> + return IRQ_HANDLED;
> +}
> +
> +static void hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on)
> +{
> + u32 val;
> +
> + regmap_read(dev->regmap, IR_CLK, &val);
> + if (on) {
> + val &= ~IR_CLK_RESET;
> + val |= IR_CLK_ENABLE;
> + } else {
> + val &= ~IR_CLK_ENABLE;
> + val |= IR_CLK_RESET;
> + }
> + regmap_write(dev->regmap, IR_CLK, val);
> +}
> +
> +static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
> +{
> + int timeout = 10000;
> + u32 val, rate;
> +
> + writel_relaxed(0x01, priv->base + IR_ENABLE);
> + while (readl_relaxed(priv->base + IR_BUSY)) {
> + if (timeout--) {
> + udelay(1);
> + } else {
> + dev_err(priv->dev, "IR_BUSY timeout\n");
> + return -ETIMEDOUT;
> + }
> + }
> +
> + /* Now only support raw mode, with symbol start from low to high */
> + rate = DIV_ROUND_CLOSEST(priv->rate, 1000000);
> + val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT;
> + val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT;
> + val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK
> + << IR_CFG_INT_LEVEL_SHIFT;
> + val |= IR_CFG_MODE_RAW;
> + val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT;
> + writel_relaxed(val, priv->base + IR_CONFIG);
> +
> + writel_relaxed(0x00, priv->base + IR_INTM);
> + /* write arbitrary value to start */
> + writel_relaxed(0x01, priv->base + IR_START);
> + return 0;
> +}
> +
> +static int hix5hd2_ir_open(struct rc_dev *rdev)
> +{
> + struct hix5hd2_ir_priv *priv = rdev->priv;
> +
> + hix5hd2_ir_enable(priv, true);
> + hix5hd2_ir_config(priv);
> + return 0;
> +}
> +
> +static void hix5hd2_ir_close(struct rc_dev *rdev)
> +{
> + struct hix5hd2_ir_priv *priv = rdev->priv;
> +
> + hix5hd2_ir_enable(priv, false);
> +}
> +
> +static struct of_device_id hix5hd2_ir_table[] = {
> + { .compatible = "hisilicon,hix5hd2-ir", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
> +
> +static int hix5hd2_ir_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct rc_dev *rdev;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + struct hix5hd2_ir_priv *priv;
> + const struct of_device_id *match;
> +
> + match = of_match_device(hix5hd2_ir_table, &pdev->dev);
> + if (!match)
> + return -EINVAL;
> +
> + priv = devm_kzalloc(dev, sizeof(struct hix5hd2_ir_priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +
> "hisilicon,power-syscon");
> + if (IS_ERR(priv->regmap)) {
> + dev_err(dev, "no power-reg\n");
> + return -EINVAL;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->irq = platform_get_irq(pdev, 0);
> + if (priv->irq < 0) {
> + dev_err(dev, "irq can not get\n");
> + return priv->irq;
> + }
> +
> + if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
> + IRQF_NO_SUSPEND, pdev->name, priv) < 0) {
> + dev_err(dev, "IRQ %d register failed\n", priv->irq);
> + return -EINVAL;
> + }
> +
> + rdev = rc_allocate_device();
> + if (!rdev)
> + return -ENOMEM;
> +
> + priv->clock = devm_clk_get(dev, NULL);
> + if (IS_ERR(priv->clock)) {
> + dev_err(dev, "clock not found\n");
> + return PTR_ERR(priv->clock);
> + }
> + clk_prepare_enable(priv->clock);
> + priv->rate = clk_get_rate(priv->clock);
> +
> + rdev->driver_type = RC_DRIVER_IR_RAW;
> + rdev->allowed_protocols = RC_BIT_ALL;
> + rdev->priv = priv;
> + rdev->open = hix5hd2_ir_open;
> + rdev->close = hix5hd2_ir_close;
> + rdev->driver_name = IR_HIX5HD2_NAME;
> + rdev->map_name = RC_MAP_LIRC;
I'm not sure RC_MAP_LIRC is appropriate. If the hardware has no implicit
remote, can this be stored in device tree like the sunxi-cir.c driver does?
> + rdev->input_name = "Hisilicon hix5hd2 Remote Control Receiver";
It would be useful is rdev->input_phys, rdev->input_id,
rdev->timeout, rdev->rx_resolution are set correctly.
> +
> + ret = rc_register_device(rdev);
> + if (ret < 0)
> + goto err;
> +
> + priv->rdev = rdev;
> + priv->dev = dev;
> + platform_set_drvdata(pdev, priv);
> +
> + /**
> + * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
> + * lircd expects a long space first before a signal train to sync.
> + */
> + hix5hd2_ir_send_lirc_timeout(rdev);
> + return ret;
> +
> +err:
> + clk_disable_unprepare(priv->clock);
> + rc_free_device(rdev);
> + dev_err(dev, "Unable to register device (%d)\n", ret);
> + return ret;
> +}
> +
> +static int hix5hd2_ir_remove(struct platform_device *pdev)
> +{
> + struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(priv->clock);
> + rc_unregister_device(priv->rdev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int hix5hd2_ir_suspend(struct device *dev)
> +{
> + struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(priv->clock);
> + hix5hd2_ir_enable(priv, false);
> +
> + return 0;
> +}
> +
> +static int hix5hd2_ir_resume(struct device *dev)
> +{
> + struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
> +
> + hix5hd2_ir_enable(priv, true);
> + clk_prepare_enable(priv->clock);
> +
> + writel_relaxed(0x01, priv->base + IR_ENABLE);
> + writel_relaxed(0x00, priv->base + IR_INTM);
> + writel_relaxed(0xff, priv->base + IR_INTC);
> + writel_relaxed(0x01, priv->base + IR_START);
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
> + hix5hd2_ir_resume);
> +
> +static struct platform_driver hix5hd2_ir_driver = {
> + .driver = {
> + .name = IR_HIX5HD2_NAME,
> + .owner = THIS_MODULE,
> + .of_match_table = hix5hd2_ir_table,
> + .pm = &hix5hd2_ir_pm_ops,
> + },
> + .probe = hix5hd2_ir_probe,
> + .remove = hix5hd2_ir_remove,
> +};
> +
> +module_platform_driver(hix5hd2_ir_driver);
> +
> +MODULE_DESCRIPTION("RC Transceiver driver for hix5hd2 platforms");
> +MODULE_AUTHOR("Guoxiong Yan <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:hix5hd2-ir");
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
