>-----Original Message-----
>From: Arnd Bergmann [mailto:a...@arndb.de]
>Sent: Tuesday, September 09, 2014 7:50 PM
>To: linux-arm-ker...@lists.infradead.org
>Cc: Lu Jingchang-B35083; Guo Shawn-R65073; devicetree@vger.kernel.org;
>Zhao Chenhui-B35336; Fu Chao-B44548; Leekha Shaveta-B20052; Gupta Suresh-
>B42813; Sharma Bhupesh-B45370; Xiubo Li-B47053; Gupta Ruchika-R66431; Lu
>Jingchang-B35083; Badola Nikhil-B46172
>Subject: Re: [PATCHv3 1/6] ARM: dts: Add SoC level device tree support for
>LS1021A
>
>On Tuesday 09 September 2014 17:12:27 Jingchang Lu wrote:
>
>> + dcfg: dcfg@1ee0000 {
>> + compatible = "fsl,ls1021a-dcfg";
>> + reg = <0x0 0x1ee0000 0x0 0x10000>;
>> + };
>> + scfg: scfg@1570000 {
>> + compatible = "fsl,ls1021a-scfg";
>> + reg = <0x0 0x1570000 0x0 0x10000>;
>> + };
>
>Should these be marked as 'compatible = "syscon"' as well?
Yes, some driver may reference them by the syscon driver,
I will add the "syscon" compatible for driver has another reference way, thanks.
>
>> + dcsr {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "fsl,dcsr", "simple-bus";
>> +
>> + ranges = <0x0 0x0 0x20000000 0x1000000>;
>> +
>> + dcsr-epu@0 {
>> + compatible = "fsl,ls1021a-dcsr-epu";
>> + reg = <0x0 0x10000>;
>> + };
>
>The binding document only specifies a generic "fsl,dcsr-epu", not
>"fsl,ls1021a-dcsr-epu". It also mandates that "interrupts"
>must be present and contain three interrupt lines.
>
>Please fix either the DT or the binding, so they match.
>
>> + dcsr-gdi@100000 {
>> + compatible = "fsl,ls1021a-dcsr-gdi";
>> + reg = <0x100000 0x10000>;
>> + };
>> +
>> + dcsr-dddi@120000 {
>> + compatible = "fsl,ls1021a-dcsr-dddi";
>> + reg = <0x120000 0x10000>;
>> + };
>> +
>> + dcsr-dcfg@220000 {
>> + compatible = "fsl,ls1021a-dcsr-dcfg";
>> + reg = <0x220000 0x1000>;
>> + };
>> +
>> + dcsr-clock@221000 {
>> + compatible = "fsl,ls1021a-dcsr-clock";
>> + reg = <0x221000 0x1000>;
>> + };
>
>None of these are part of the dcsr.txt binding.
>
>> + dcsr-rcpm@222000 {
>> + compatible = "fsl,ls1021a-dcsr-rcpm";
>> + reg = <0x222000 0x1000 0x223000 0x1000>;
>> + };
>
>Missing generic fsl,dcsr-rcpm compatible value again.
>
>> + dcsr-ccp@225000 {
>> + compatible = "fsl,ls1021a-dcsr-ccp";
>> + reg = <0x225000 0x1000>;
>> + };
>
>I'm not checking any devices below this one, I assume they are mostly
>incomplete, so please go through the whole list and make sure they all
>match the documentation.
>I can't really find any code using the dcsr in Linux. Is there an out of
>tree driver that you plan to submit?
>
> Arnd
I will remove these dcsr related nodes and leave them to be added later when
All ok. Thanks.
Best Regards,
Jingchang
N�����r��y����b�X��ǧv�^�){.n�+���z��z��z)����w* jg��� �����ݢj/���z�ޖ��2�ޙ����&�)ߡ�a���� �G���h��j:+v���w��٥
