Currently sunxi_divs_clk_setup assumes the number of child clocks
to be the same as the number of clock-output-names, and a maximum
of SUNXI_DIVS_MAX_QTY child clocks.
On sun6i, PLL6 only has 1 child clock, but the parent would be used
as well, thereby also having it's own clock-output-names entry. This
results in an extra bogus clock being registered.
This patch adds an entry for the number of child clocks alongside
the data structures for them.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
drivers/clk/sunxi/clk-sunxi.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 2cf6581..05d9329 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1037,6 +1037,7 @@ static void __init sunxi_gates_clk_setup(struct
device_node *node,
struct divs_data {
const struct factors_data *factors; /* data for the factor clock */
+ int ndivs; /* number of children */
struct {
u8 fixed; /* is it a fixed divisor? if not... */
struct clk_div_table *table; /* is it a table based divisor? */
@@ -1056,6 +1057,7 @@ static struct clk_div_table pll6_sata_tbl[] = {
static const struct divs_data pll5_divs_data __initconst = {
.factors = &sun4i_pll5_data,
+ .ndivs = 2,
.div = {
{ .shift = 0, .pow = 0, }, /* M, DDR */
{ .shift = 16, .pow = 1, }, /* P, other */
@@ -1064,6 +1066,7 @@ static const struct divs_data pll5_divs_data __initconst
= {
static const struct divs_data pll6_divs_data __initconst = {
.factors = &sun4i_pll6_data,
+ .ndivs = 2,
.div = {
{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA
*/
{ .fixed = 2 }, /* P, other */
@@ -1094,7 +1097,7 @@ static void __init sunxi_divs_clk_setup(struct
device_node *node,
struct clk_fixed_factor *fix_factor;
struct clk_divider *divider;
void __iomem *reg;
- int i = 0;
+ int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
int flags, clkflags;
/* Set up factor clock that we will be dividing */
@@ -1117,7 +1120,11 @@ static void __init sunxi_divs_clk_setup(struct
device_node *node,
* our RAM clock! */
clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
- for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) {
+ /* if number of children known, use it */
+ if (data->ndivs)
+ ndivs = data->ndivs;
+
+ for (i = 0; i < ndivs; i++) {
if (of_property_read_string_index(node, "clock-output-names",
i, &clk_name) != 0)
break;
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
