This will allow us to define GPIO-attached devices (LEDs, buttons) in
the the device tree.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
This is based on top of
[PATCH v6] bcma: register bcma as device tree driver
that I hope will reach wireless-next git tree.
V2: Describe axi chilren and make gpio a child of chipcommon core.
---
Documentation/devicetree/bindings/bus/bcma.txt | 24 ++++++++++++++++++++++++
drivers/bcma/driver_gpio.c | 5 +++++
2 files changed, 29 insertions(+)
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt
b/Documentation/devicetree/bindings/bus/bcma.txt
index e9070c1..26ef4b7 100644
--- a/Documentation/devicetree/bindings/bus/bcma.txt
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
@@ -9,6 +9,22 @@ Required properties:
The cores on the AXI bus are automatically detected by bcma with the
memory ranges they are using and they get registered afterwards.
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
+detected (e.g. IRQ numbers).
+
+There is also one special core called ChipCommon that may contain some
+extra sub-devices. This is because some devices (e.g. GPIO chip) are
+not standalone cores and can be access using ChipCommon regs only.
+Possible ChipCommon children:
+
+- gpio: GPIO chip on the SoC
+
+ Required properties:
+ - compatible: "brcm,bus-gpio"
+ - gpio-controller : makes the node a GPIO controller
+ - #gpio-cells : size of the GPIO specifier, must be 2
+
Example:
axi@18000000 {
@@ -17,4 +33,12 @@ Example:
ranges = <0x00000000 0x18000000 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ chipcommon@0 {
+ gpio@0 {
+ compatible = "brcm,bus-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
};
diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c
index 8ea497c..7ae39a8 100644
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -218,6 +218,11 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
#if IS_BUILTIN(CONFIG_BCM47XX)
chip->to_irq = bcma_gpio_to_irq;
#endif
+#if IS_BUILTIN(CONFIG_OF)
+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+ chip->of_node = of_find_compatible_node(NULL, NULL,
+ "brcm,bus-gpio");
+#endif
switch (cc->core->bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM53572:
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
