This adds an initial device tree to run Linux on the Cortex-M4 on
Vybrid.
HACK: Because we include armv7-m.dtsi, the soc node happens to
be before the clock node. This is a problem for vf610-clk.c, which
tries to optain the fixed clocks defined in the clock nodes. But
because clock drivers are initialized sequencially, and we do not
have support for deferred probing, the clock initialization fails
horrible.
Move the armv7-m.dtsi include to the bottom to temporarily work
work around this...
Signed-off-by: Stefan Agner <ste...@agner.ch>
---
Maybe a dummy soc entry in armv7-m.dtsi also helps here. But a
hack as well. Is it common acceptable that the kernel depends
on DTS order?
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 1 -
arch/arm/boot/dts/vf610m4.dts | 144 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 145 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/vf610m4.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..b1c6c1d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
+dtb-$(CONFIG_SOC_VF610M4) += vf610m4.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 5a660d0..0516484 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,4 +1,3 @@
-#include "skeleton.dtsi"
/ {
nvic: nv-interrupt-controller {
diff --git a/arch/arm/boot/dts/vf610m4.dts b/arch/arm/boot/dts/vf610m4.dts
new file mode 100644
index 0000000..61488fe
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4.dts
@@ -0,0 +1,144 @@
+/*
+ * Device tree for VF610 Cortex-M4 support
+ */
+
+/dts-v1/;
+#include "skeleton.dtsi"
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+
+ chosen {
+ bootargs = "console=ttyLP0,115200 ignore_loglevel
ihash_entries=64 dhash_entries=64 earlyprintk clk_ignore_unused init=/linuxrc
root=/dev/mmcblk0p2 rootwait";
+ };
+
+ memory {
+ reg = <0x88000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ fxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ aips0: aips-bus@40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x70000>;
+ ranges;
+
+/*
+ uart0: serial@40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ interrupts = <61>;
+ clocks = <&clks VF610_CLK_UART0>;
+ clock-names = "ipg";
+ status = "okay";
+ };
+
+ uart1: serial@40028000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40028000 0x1000>;
+ interrupts = <62>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+ status = "okay";
+ };
+*/
+ uart2: serial@40029000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40029000 0x1000>;
+ interrupts = <63>;
+ clocks = <&clks VF610_CLK_UART2>;
+ clock-names = "ipg";
+ status = "okay";
+ };
+
+ pit: pit@40037000 {
+ compatible = "fsl,vf610-pit";
+ reg = <0x40037000 0x1000>;
+ interrupts = <39>;
+ clocks = <&clks VF610_CLK_PIT>;
+ clock-names = "pit";
+ };
+
+ iomuxc: iomuxc@40048000 {
+ compatible = "fsl,vf610-iomuxc";
+ reg = <0x40048000 0x1000>;
+ #gpio-range-cells = <3>;
+
+ vf610-colibri {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+
VF610_PAD_PTB20__GPIO_42 0x219d
+ >;
+ };
+ };
+ };
+
+ anatop@40050000 {
+ compatible = "fsl,vf610-anatop";
+ reg = <0x40050000 0x1000>;
+ };
+
+ clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ aips1: aips-bus@40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40080000 0x80000>;
+ ranges;
+
+
+ esdhc1: esdhc@400b2000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b2000 0x1000>;
+ interrupts = <28>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
+ };
+ };
+ };
+};
+
+#include "armv7-m.dtsi"
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
