On 10/10/2014 08:14 PM, Bjorn Andersson wrote:
> On Tue, Sep 2, 2014 at 8:40 AM, Georgi Djakov <gdja...@mm-sol.com> wrote:
>> Enable support for the two SD host controllers on the APQ8084 platform
>> by adding the required nodes to the DT files.
>> On the IFC6540 board, the first controller is connected to the onboard
>> eMMC and the second is connected to a micro-SD card slot.
>>
>> Signed-off-by: Georgi Djakov <gdja...@mm-sol.com>
>
> Hi Georgi,
>
> This looks sane, but...
>
>> ---
>> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 11 +++++++++++
>> arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++
>> 2 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> index e41cb8a..c9ff108 100644
>> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> [..]
>> + sdhci@f98a4900 {
>> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
>> + bus-width = <4>;
>
> ...why do you add this node and leave it disabled in the dts?
>
Hi Bjorn,
Currently only the eMMC is functional on this board, so now we
have just the board specific configuration under this node.
More patches are forthcoming.
BR,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
