On Fri, Oct 17, 2014 at 10:54:25AM +0100, Chunyan Zhang wrote:
> Add serial driver for spreadtrum sharkl platform with earlycon
> support at first.
>
> Signed-off-by: Chunyan Zhang <chunyan.zh...@spreadtrum.com>
> ---
> drivers/tty/serial/Kconfig | 24 ++++++++++++++
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/sprd-serial.c | 64
> ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 89 insertions(+)
> create mode 100644 drivers/tty/serial/sprd-serial.c
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 26cec64..33b8f90 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -113,6 +113,30 @@ config SERIAL_SB1250_DUART_CONSOLE
>
> If unsure, say Y.
>
> +config SERIAL_SPRD
> + tristate "Support for SPRD serial"
> + depends on ARM || ARM64
> + select SERIAL_CORE
> + help
> + This enables the driver for the Spreadtrum's serial.
> +
> +config SERIAL_SPRD_NR
> + int "Maximum number of sprd serial ports"
> + depends on SERIAL_SPRD
> + default "4"
This is not used below.
> +
> +config SERIAL_SPRD_CONSOLE
> + bool "SPRD UART console support"
> + depends on SERIAL_SPRD=y
> + select SERIAL_CORE_CONSOLE
> + select SERIAL_EARLYCON
> + help
> + Support for early debug console using Spreadtrum's serial. This
> enables
> + the console before standard serial driver is probed. This is enabled
> + with "earlycon=serial_sprd" on the kernel command line. The console is
> + enabled when early_param is processed.
There only appears to be an earlycon driver, and not "standard serial
driver".
What happens after earlycon?
Surely there should be a real driver to take ownership of the UART?
As far as I can see it won't be possible to boot your platform to a
prompt, because earlycon will have gone before that.
Thanks,
Mark.
> +
> +
> config SERIAL_ATMEL
> bool "AT91 / AT32 on-chip serial port support"
> depends on ARCH_AT91 || AVR32
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index 0080cc3..b16e0d4 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
> obj-$(CONFIG_SERIAL_RP2) += rp2.o
> obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
> obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
> +obj-$(CONFIG_SERIAL_SPRD) += sprd-serial.o
>
> # GPIOLIB helpers for modem control lines
> obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
> diff --git a/drivers/tty/serial/sprd-serial.c
> b/drivers/tty/serial/sprd-serial.c
> new file mode 100644
> index 0000000..9ae594f
> --- /dev/null
> +++ b/drivers/tty/serial/sprd-serial.c
> @@ -0,0 +1,64 @@
> +/*
> + * Copyright (C) 2012 Spreadtrum Communications Inc.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/console.h>
> +#include <linux/init.h>
> +#include <linux/serial_core.h>
> +#include <linux/of.h>
> +
> +/*offset*/
> +#define UART_TXD 0x0000
> +#define UART_RXD 0x0004
> +#define UART_STS0 0x0008
> +#define UART_STS1 0x000C
> +#define UART_IEN 0x0010
> +#define UART_ICLR 0x0014
> +#define UART_CTL0 0x0018
> +#define UART_CTL1 0x001C
> +#define UART_CTL2 0x0020
> +#define UART_CLKD0 0x0024
> +#define UART_CLKD1 0x0028
> +#define UART_STS2 0x002C
> +
> +/*line status */
> +#define UART_LSR_TX_OVER (0x1<<15)
> +
> +static void serial_sprd_putc(struct uart_port *port, int c)
> +{
> + while (!(readl(port->membase + UART_STS0) & UART_LSR_TX_OVER))
> + ;
> + writeb(c, port->membase + UART_TXD);
> +}
> +
> +static void serial_sprd_early_write(struct console *con, const char *s,
> + unsigned n)
> +{
> + struct earlycon_device *dev = con->data;
> +
> + uart_console_write(&dev->port, s, n, serial_sprd_putc);
> +}
> +
> +static int __init serial_sprd_early_console_setup(
> + struct earlycon_device *device,
> + const char *opt)
> +{
> + if (!device->port.membase)
> + return -ENODEV;
> +
> + device->con->write = serial_sprd_early_write;
> + return 0;
> +}
> +EARLYCON_DECLARE(serial_sprd, serial_sprd_early_console_setup);
> +OF_EARLYCON_DECLARE(serial_sprd, "sprd,serial",
> + serial_sprd_early_console_setup);
> --
> 1.7.9.5
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
