On Fri, Oct 24, 2014 at 11:22:01PM +0200, Arnaud Ebalard wrote: > > When writing initial .dts file for NETGEAR ReadyNAS 102, I put the wrong color > for backup and SATA leds (green instead of blue for all three). > > Reported-by: Johan Kristell <[email protected]> > Signed-off-by: Arnaud Ebalard <[email protected]>
Acked-by: Andrew Lunn <[email protected]> Andrew > --- > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts > b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > index 3aebd93cc33c..f79579bdf8fe 100644 > --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts > +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > @@ -204,20 +204,20 @@ > default-state = "keep"; > }; > > - green-sata1-led { > - label = "rn102:green:sata1"; > + blue-sata1-led { > + label = "rn102:blue:sata1"; > gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; > default-state = "on"; > }; > > - green-sata2-led { > - label = "rn102:green:sata2"; > + blue-sata2-led { > + label = "rn102:blue:sata2"; > gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; > default-state = "on"; > }; > > - green-backup-led { > - label = "rn102:green:backup"; > + blue-backup-led { > + label = "rn102:blue:backup"; > gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; > default-state = "on"; > }; > -- > 2.1.1 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
