Hello Pantelis,

I've pointed to this already, but anyway:

On 28/10/14 21:36, ext Pantelis Antoniou wrote:
> Dynamically inserting spi device nodes requires the use of a single
> device registration method. Rework and export it.
> 
> Methods to lookup a device/master using a device node are added
> as well, of_find_spi_master_by_node() & of_find_spi_device_by_node().
> 
> Signed-off-by: Pantelis Antoniou <pantelis.anton...@konsulko.com>
> ---
>  drivers/spi/spi.c | 256 
> +++++++++++++++++++++++++++++++++---------------------
>  1 file changed, 158 insertions(+), 98 deletions(-)
> 
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index ebcb33d..f81d799 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -1220,6 +1220,123 @@ err_init_queue:
>  /*-------------------------------------------------------------------------*/
>  
>  #if defined(CONFIG_OF)
> +
> +static struct spi_device *
> +of_register_spi_device(struct spi_master *master, struct device_node *node)

During the test Wladislav has found that node is actually not used,

> +{
> +     struct spi_device *spi;
> +     struct device_node *nc;

but non-initialized nc is used further in the code.
Should not nc be a parameter of the function instead of a local variable?

> +     int rc;
> +     u32 value;
> +
> +     /* Alloc an spi_device */
> +     spi = spi_alloc_device(master);
> +     if (!spi) {
> +             dev_err(&master->dev, "spi_device alloc error for %s\n",
> +                     nc->full_name);
> +             rc = -ENOMEM;
> +             goto err_out;
> +     }
> +
> +     /* Select device driver */
> +     rc = of_modalias_node(nc, spi->modalias,
> +                             sizeof(spi->modalias));
> +     if (rc < 0) {
> +             dev_err(&master->dev, "cannot find modalias for %s\n",
> +                     nc->full_name);
> +             goto err_out;
> +     }
> +
> +     /* Device address */
> +     rc = of_property_read_u32(nc, "reg", &value);
> +     if (rc) {
> +             dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
> +                     nc->full_name, rc);
> +             goto err_out;
> +     }
> +     spi->chip_select = value;
> +
> +     /* Mode (clock phase/polarity/etc.) */
> +     if (of_find_property(nc, "spi-cpha", NULL))
> +             spi->mode |= SPI_CPHA;
> +     if (of_find_property(nc, "spi-cpol", NULL))
> +             spi->mode |= SPI_CPOL;
> +     if (of_find_property(nc, "spi-cs-high", NULL))
> +             spi->mode |= SPI_CS_HIGH;
> +     if (of_find_property(nc, "spi-3wire", NULL))
> +             spi->mode |= SPI_3WIRE;
> +     if (of_find_property(nc, "spi-lsb-first", NULL))
> +             spi->mode |= SPI_LSB_FIRST;
> +
> +     /* Device DUAL/QUAD mode */
> +     if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
> +             switch (value) {
> +             case 1:
> +                     break;
> +             case 2:
> +                     spi->mode |= SPI_TX_DUAL;
> +                     break;
> +             case 4:
> +                     spi->mode |= SPI_TX_QUAD;
> +                     break;
> +             default:
> +                     dev_warn(&master->dev,
> +                             "spi-tx-bus-width %d not supported\n",
> +                             value);
> +                     break;
> +             }
> +     }
> +
> +     if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
> +             switch (value) {
> +             case 1:
> +                     break;
> +             case 2:
> +                     spi->mode |= SPI_RX_DUAL;
> +                     break;
> +             case 4:
> +                     spi->mode |= SPI_RX_QUAD;
> +                     break;
> +             default:
> +                     dev_warn(&master->dev,
> +                             "spi-rx-bus-width %d not supported\n",
> +                             value);
> +                     break;
> +             }
> +     }
> +
> +     /* Device speed */
> +     rc = of_property_read_u32(nc, "spi-max-frequency", &value);
> +     if (rc) {
> +             dev_err(&master->dev, "%s has no valid 'spi-max-frequency' 
> property (%d)\n",
> +                     nc->full_name, rc);
> +             goto err_out;
> +     }
> +     spi->max_speed_hz = value;
> +
> +     /* IRQ */
> +     spi->irq = irq_of_parse_and_map(nc, 0);
> +
> +     /* Store a pointer to the node in the device structure */
> +     of_node_get(nc);
> +     spi->dev.of_node = nc;
> +
> +     /* Register the new device */
> +     request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
> +     rc = spi_add_device(spi);
> +     if (rc) {
> +             dev_err(&master->dev, "spi_device register error %s\n",
> +                     nc->full_name);
> +             goto err_out;
> +     }
> +
> +     return spi;
> +
> +err_out:
> +     spi_dev_put(spi);
> +     return ERR_PTR(rc);
> +}
> +
>  /**
>   * of_register_spi_devices() - Register child devices onto the SPI bus
>   * @master:  Pointer to spi_master device
> @@ -1229,120 +1346,63 @@ err_init_queue:
>   */
>  static void of_register_spi_devices(struct spi_master *master)
>  {
> -     struct spi_device *spi;
>       struct device_node *nc;
> -     int rc;
> -     u32 value;
> +     struct spi_device *spi;
>  
>       if (!master->dev.of_node)
>               return;
>  
>       for_each_available_child_of_node(master->dev.of_node, nc) {
> -             /* Alloc an spi_device */
> -             spi = spi_alloc_device(master);
> -             if (!spi) {
> -                     dev_err(&master->dev, "spi_device alloc error for %s\n",
> +             spi = of_register_spi_device(master, nc);
> +             if (IS_ERR(spi))
> +                     dev_warn(&master->dev, "Failed to create SPI device for 
> %s\n",
>                               nc->full_name);
> -                     spi_dev_put(spi);
> -                     continue;
> -             }
> +     }
> +}
>  
> -             /* Select device driver */
> -             if (of_modalias_node(nc, spi->modalias,
> -                                  sizeof(spi->modalias)) < 0) {
> -                     dev_err(&master->dev, "cannot find modalias for %s\n",
> -                             nc->full_name);
> -                     spi_dev_put(spi);
> -                     continue;
> -             }
> +static int of_dev_node_match(struct device *dev, void *data)
> +{
> +     return dev->of_node == data;
> +}
>  
> -             /* Device address */
> -             rc = of_property_read_u32(nc, "reg", &value);
> -             if (rc) {
> -                     dev_err(&master->dev, "%s has no valid 'reg' property 
> (%d)\n",
> -                             nc->full_name, rc);
> -                     spi_dev_put(spi);
> -                     continue;
> -             }
> -             spi->chip_select = value;
> -
> -             /* Mode (clock phase/polarity/etc.) */
> -             if (of_find_property(nc, "spi-cpha", NULL))
> -                     spi->mode |= SPI_CPHA;
> -             if (of_find_property(nc, "spi-cpol", NULL))
> -                     spi->mode |= SPI_CPOL;
> -             if (of_find_property(nc, "spi-cs-high", NULL))
> -                     spi->mode |= SPI_CS_HIGH;
> -             if (of_find_property(nc, "spi-3wire", NULL))
> -                     spi->mode |= SPI_3WIRE;
> -             if (of_find_property(nc, "spi-lsb-first", NULL))
> -                     spi->mode |= SPI_LSB_FIRST;
> -
> -             /* Device DUAL/QUAD mode */
> -             if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
> -                     switch (value) {
> -                     case 1:
> -                             break;
> -                     case 2:
> -                             spi->mode |= SPI_TX_DUAL;
> -                             break;
> -                     case 4:
> -                             spi->mode |= SPI_TX_QUAD;
> -                             break;
> -                     default:
> -                             dev_warn(&master->dev,
> -                                      "spi-tx-bus-width %d not supported\n",
> -                                      value);
> -                             break;
> -                     }
> -             }
> +/* bah; the match functions differ just by const-ness */
> +static int of_dev_node_match_const(struct device *dev, const void *data)
> +{
> +     return dev->of_node == data;
> +}
>  
> -             if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
> -                     switch (value) {
> -                     case 1:
> -                             break;
> -                     case 2:
> -                             spi->mode |= SPI_RX_DUAL;
> -                             break;
> -                     case 4:
> -                             spi->mode |= SPI_RX_QUAD;
> -                             break;
> -                     default:
> -                             dev_warn(&master->dev,
> -                                      "spi-rx-bus-width %d not supported\n",
> -                                      value);
> -                             break;
> -                     }
> -             }
> +/* must call put_device() when done with returned spi_device device */
> +struct spi_device *of_find_spi_device_by_node(struct device_node *node)
> +{
> +     struct device *dev;
>  
> -             /* Device speed */
> -             rc = of_property_read_u32(nc, "spi-max-frequency", &value);
> -             if (rc) {
> -                     dev_err(&master->dev, "%s has no valid 
> 'spi-max-frequency' property (%d)\n",
> -                             nc->full_name, rc);
> -                     spi_dev_put(spi);
> -                     continue;
> -             }
> -             spi->max_speed_hz = value;
> +     dev = bus_find_device(&spi_bus_type, NULL, node,
> +                                      of_dev_node_match);
> +     if (!dev)
> +             return NULL;
>  
> -             /* IRQ */
> -             spi->irq = irq_of_parse_and_map(nc, 0);
> +     return to_spi_device(dev);
> +}
> +EXPORT_SYMBOL(of_find_spi_device_by_node);
>  
> -             /* Store a pointer to the node in the device structure */
> -             of_node_get(nc);
> -             spi->dev.of_node = nc;
> +/* forward decl */
> +static struct class spi_master_class;
>  
> -             /* Register the new device */
> -             request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
> -             rc = spi_add_device(spi);
> -             if (rc) {
> -                     dev_err(&master->dev, "spi_device register error %s\n",
> -                             nc->full_name);
> -                     spi_dev_put(spi);
> -             }
> +/* the spi masters are not using spi_bus, so we find it with another way */
> +struct spi_master *of_find_spi_master_by_node(struct device_node *node)
> +{
> +     struct device *dev;
>  
> -     }
> +     dev = class_find_device(&spi_master_class, NULL, node,
> +                             of_dev_node_match_const);
> +     if (!dev)
> +             return NULL;
> +
> +     /* reference got in class_find_device */
> +     return container_of(dev, struct spi_master, dev);
>  }
> +EXPORT_SYMBOL(of_find_spi_master_by_node);
> +
>  #else
>  static void of_register_spi_devices(struct spi_master *master) { }
>  #endif
> 

-- 
Best regards,
Alexander Sverdlin.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to