On Mon, 17 Nov 2014, Chanwoo Choi wrote: > This patch adds the binding documentation for Samsung S2MPS13 PMIC > which is similiar with existing S2MPS14 PMIC. S2MPS13 has the different number > of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14. > > Cc: Lee Jones <lee.jo...@linaro.org> > Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 22 ++++++++++++---------- > 1 file changed, 12 insertions(+), 10 deletions(-)
For my reference: Acked-by: Lee Jones <lee.jo...@linaro.org> > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt > b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 0e4026a..57a0450 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator > +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. > Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" > - or "samsung,s2mpu02-pmic". > +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" > + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -17,8 +17,8 @@ Optional properties: > - interrupts: Interrupt specifiers for interrupt sources. > > Optional nodes: > -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz > - outputs, so to register these as clocks with common clock framework > +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered > 32.768 > + KHz outputs, so to register these as clocks with common clock framework > instantiate a sub-node named "clocks". It uses the common clock binding > documented in : > [Documentation/devicetree/bindings/clock/clock-bindings.txt] > @@ -30,12 +30,12 @@ Optional nodes: > the clock which they consume. > Clock ID Devices > ---------------------------------------------------------- > - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 > - 32KhzCP 1 S2MPS11, S5M8767 > - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 > + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 > + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 > + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 > > - - compatible: Should be one of: "samsung,s2mps11-clk", > "samsung,s2mps14-clk", > - "samsung,s5m8767-clk" > + - compatible: Should be one of: "samsung,s2mps11-clk", > "samsung,s2mps13-clk", > + "samsung,s2mps14-clk", "samsung,s5m8767-clk" > > - regulators: The regulators of s2mps11 that have to be instantiated should > be > included in a sub-node named 'regulators'. Regulator nodes included in this > @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. > - LDOn > - valid values for n are: > - S2MPS11: 1 to 38 > + - S2MPS13: 1 to 40 > - S2MPS14: 1 to 25 > - S2MPU02: 1 to 28 > - Example: LDO1, LDO2, LDO28 > - BUCKn > - valid values for n are: > - S2MPS11: 1 to 10 > + - S2MPS13: 1 to 10 > - S2MPS14: 1 to 5 > - S2MPU02: 1 to 7 > - Example: BUCK1, BUCK2, BUCK9 -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
