> + 213 = /dev/ttySPX0 SPRD serial port 0
> + ...
> + 216 = /dev/ttySPX3 SPRD serial port 3
Please use dynamic allocation or give a very very good reason why you
can't
> +config SERIAL_SPRD_NR
> + int "Maximum number of sprd serial ports"
> + depends on SERIAL_SPRD
> + default "4"
If you are doing dynamic allocation this should pretty much go away
> +static int sprd_startup(struct uart_port *port)
> +{
> + int ret = 0;
> + unsigned int ien, ctrl1;
> + struct sprd_uart_port *sp;
> +
> + serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
> +
> + /* clear rx fifo */
> + while (serial_in(port, SPRD_STS1) & 0x00ff)
> + serial_in(port, SPRD_RXD);
> +
> + /* clear tx fifo */
> + while (serial_in(port, SPRD_STS1) & 0xff00)
> + ;
Missing a cpu_relax and I would have thought a timeout on both of these.
> +static void sprd_set_termios(struct uart_port *port,
> + struct ktermios *termios,
> + struct ktermios *old)
> +{
> + unsigned int baud, quot;
> + /* calculate parity */
> + lcr &= ~SPRD_LCR_PARITY;
> + if (termios->c_cflag & PARENB) {
> + lcr |= SPRD_LCR_PARITY_EN;
> + if (termios->c_cflag & PARODD)
> + lcr |= SPRD_LCR_ODD_PAR;
> + else
> + lcr |= SPRD_LCR_EVEN_PAR;
> + }
If you don't support mark/space parity then also clear CMSPAR in
termios->c_cflag. If you do then it ought to be handled above.
> +
> + /* clock divider bit16~bit20 */
> + serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
> + serial_out(port, SPRD_LCR, lcr);
> + fc |= 0x3e00 | THLD_RX_FULL;
> + serial_out(port, SPRD_CTL1, fc);
Also set the resulting baud back into the termios (see the 8250 termios
for an example)
> +static int __init sprd_console_setup(struct console *co, char *options)
> +{
> + struct uart_port *port;
> + int baud = 115200;
> + int bits = 8;
> + int parity = 'n';
> + int flow = 'n';
> +
> + if (unlikely(co->index >= UART_NR_MAX || co->index < 0))
> + co->index = 0;
> +
> + port = (struct uart_port *)sprd_port[co->index];
> + if (port == NULL) {
> + pr_info("srial port %d not yet initialized\n", co->index);
Typo
Looks basically sound to me
Alan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
