On Tue, Dec 02, 2014 at 03:35:47PM +0530, Harini Katakam wrote:
> From: Vishnu Motghare <vish...@xilinx.com>
> 
> Cadence I2C controller has bug wherein it generates invalid read transactions
> after time-out in master receiver mode. This driver does not use the HW
> timeout and this interrupt is disabled but the feature itself cannot be
> disabled. Hence, this patch writes the maximum value (0xFF) to this register.
> This is one of the workarounds to this bug and it will not avoid the issue
> completely but reduce the chances of error.

This is a good description and should be in a comment in the driver.

> 
> Signed-off-by: Vishnu Motghare <vish...@xilinx.com>
> Signed-off-by: Harini Katakam <hari...@xilinx.com>
> ---
>  drivers/i2c/busses/i2c-cadence.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-cadence.c 
> b/drivers/i2c/busses/i2c-cadence.c
> index e54899e..8065205 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -111,6 +111,8 @@
>  #define CDNS_I2C_DIVA_MAX    4
>  #define CDNS_I2C_DIVB_MAX    64
>  
> +#define CDNS_I2C_TIMEOUT_MAX 0xFF
> +
>  #define cdns_i2c_readreg(offset)       readl_relaxed(id->membase + offset)
>  #define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + 
> offset)
>  
> @@ -858,6 +860,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>               goto err_clk_dis;
>       }
>  
> +     cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
> +
>       dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
>                id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
>  
> -- 
> 1.7.9.5
> 

Attachment: signature.asc
Description: Digital signature

Reply via email to