Now that the implementation has been applied to sound/for-next 
(https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/?h=for-next
), who is going to pick the related patches (this one and the other two adding 
documentation and default config)?

Best regards,
Alexander

On Monday 29 December 2014, 13:08:41 wrote Alexander Stein:
> This adds the device node for the ac97 controller.
> 
> Signed-off-by: Alexander Stein <alexander...@web.de>
> Acked-By Alexandre Belloni <alexandre.bell...@free-electrons.com>
> ---
> Changes in v3:
> * Renamed the compatible string to atmel,at91sam9263-ac97c
> * Added 'Acked-By Alexandre Belloni <alexandre.bell...@free-electrons.com>'
> 
>  arch/arm/boot/dts/at91sam9263.dtsi | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi 
> b/arch/arm/boot/dts/at91sam9263.dtsi
> index 6283785..2e67e38 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -700,6 +700,16 @@
>                                       };
>                               };
>  
> +                             ac97 {
> +                                     pinctrl_ac97: ac97-0 {
> +                                             atmel,pins =
> +                                                     <AT91_PIOB 0 
> AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB12 periph A AC97FS pin */
> +                                                      AT91_PIOB 1 
> AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB13 periph A AC97CK pin */
> +                                                      AT91_PIOB 2 
> AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB14 periph A AC97TX pin */
> +                                                      AT91_PIOB 3 
> AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB14 periph A AC97RX pin */
> +                                     };
> +                             };
> +
>                               pioA: gpio@fffff200 {
>                                       compatible = "atmel,at91rm9200-gpio";
>                                       reg = <0xfffff200 0x200>;
> @@ -828,6 +838,17 @@
>                               status = "disabled";
>                       };
>  
> +                     ac97: sound@fffa0000 {
> +                             compatible = "atmel,at91sam9263-ac97c";
> +                             reg = <0xfffa0000 0x4000>;
> +                             interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
> +                             pinctrl-names = "default";
> +                             pinctrl-0 = <&pinctrl_ac97>;
> +                             clocks = <&ac97_clk>;
> +                             clock-names = "ac97_clk";
> +                             status = "disabled";
> +                     };
> +
>                       macb0: ethernet@fffbc000 {
>                               compatible = "cdns,at32ap7000-macb", 
> "cdns,macb";
>                               reg = <0xfffbc000 0x100>;
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to