On 01/12/2015 07:45 PM, Sören Brinkmann wrote:
> On Mon, 2015-01-12 at 08:34PM +0530, Kedareswara rao Appana wrote:
>> Instead of enabling/disabling clocks at several locations in the driver,
>> Use the runtime_pm framework. This consolidates the actions for runtime PM
>> In the appropriate callbacks and makes the driver more readable and
>> mantainable.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com>
>> Signed-off-by: Kedareswara rao Appana <appa...@xilinx.com>
>> ---
>> Changes for v5:
>> - Updated with the review comments.
>> Updated the remove fuction to use runtime_pm.
>> Chnages for v4:
>> - Updated with the review comments.
>> Changes for v3:
>> - Converted the driver to use runtime_pm.
>> Changes for v2:
>> - Removed the struct platform_device* from suspend/resume
>> as suggest by Lothar.
>>
>> drivers/net/can/xilinx_can.c | 157
>> ++++++++++++++++++++++++++++-------------
>> 1 files changed, 107 insertions(+), 50 deletions(-)
> [..]
>> +static int __maybe_unused xcan_runtime_resume(struct device *dev)
>> {
>> - struct platform_device *pdev = dev_get_drvdata(dev);
>> - struct net_device *ndev = platform_get_drvdata(pdev);
>> + struct net_device *ndev = dev_get_drvdata(dev);
>> struct xcan_priv *priv = netdev_priv(ndev);
>> int ret;
>> + u32 isr, status;
>>
>> ret = clk_enable(priv->bus_clk);
>> if (ret) {
>> @@ -1014,15 +1030,28 @@ static int __maybe_unused xcan_resume(struct device
>> *dev)
>> ret = clk_enable(priv->can_clk);
>> if (ret) {
>> dev_err(dev, "Cannot enable clock.\n");
>> - clk_disable_unprepare(priv->bus_clk);
>> + clk_disable(priv->bus_clk);
> [...]
>> @@ -1173,12 +1219,23 @@ static int xcan_remove(struct platform_device *pdev)
>> {
>> struct net_device *ndev = platform_get_drvdata(pdev);
>> struct xcan_priv *priv = netdev_priv(ndev);
>> + int ret;
>> +
>> + ret = pm_runtime_get_sync(&pdev->dev);
>> + if (ret < 0) {
>> + netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
>> + __func__, ret);
>> + return ret;
>> + }
>>
>> if (set_reset_mode(ndev) < 0)
>> netdev_err(ndev, "mode resetting failed!\n");
>>
>> unregister_candev(ndev);
>> + pm_runtime_disable(&pdev->dev);
>> netif_napi_del(&priv->napi);
>> + clk_disable_unprepare(priv->bus_clk);
>> + clk_disable_unprepare(priv->can_clk);
>
> Shouldn't pretty much all these occurrences of clk_disable/enable
> disappear? This should all be handled by the runtime_pm framework now.We have: - clk_prepare_enable() in probe - clk_disable_unprepare() in remove - clk_enable() in runtime_resume - clk_disable() in runtime_suspend Which is, as far as I understand the right way to do it. Maybe Kedareswara can post the clock debug output again with this patch iteration. Have I missed something? regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
