On Thu, Jan 29, 2015 at 07:56:40PM +0530, Varka Bhadram wrote:
> Hi,
>
> On Thursday 29 January 2015 07:39 PM, Markus Pargmann wrote:
> >This is a driver for the imx25 ADC/TSC module. It controls the
> >touchscreen conversion queue and creates a touchscreen input device.
> >The driver currently only supports 4 wire touchscreens. The driver uses
> >a simple conversion queue of precharge, touch detection, X measurement,
> >Y measurement, precharge and another touch detection.
> >
> >This driver uses the regmap from the parent to setup some touch specific
> >settings in the core driver and setup a idle configuration with touch
> >detection.
> >
> >Signed-off-by: Markus Pargmann <m...@pengutronix.de>
> >Signed-off-by: Denis Carikli <de...@eukrea.com>
> >Acked-by: Dmitry Torokhov <d...@vmware.com>
> >Signed-off-by: Markus Pargmann <m...@pengutronix.de>
> >---
> > drivers/input/touchscreen/Kconfig | 6 +
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/fsl-imx25-tcq.c | 587
> > ++++++++++++++++++++++++++++++
> > 3 files changed, 594 insertions(+)
> > create mode 100644 drivers/input/touchscreen/fsl-imx25-tcq.c
> >
> (...)
>
> >+ ret = request_threaded_irq(priv->irq, mx25_tcq_irq, mx25_tcq_irq_thread,
> >+ IRQF_ONESHOT, pdev->name, priv);
>
> We can use devres API for request_thread_irq()...
>
> >+ if (ret) {
> >+ dev_err(dev, "Failed requesting IRQ\n");
> >+ goto err_clk_unprepare;
> >+ }
> >+
> >+ ret = mx25_tcq_init(priv);
> >+ if (ret) {
> >+ dev_err(dev, "Failed to init tcq\n");
> >+ goto error_free_irq;
> >+ }
> >+
> >+ platform_set_drvdata(pdev, priv);
> >+
> >+ return 0;
> >+
> >+error_free_irq:
> >+ free_irq(priv->irq, priv);
>
> This is not required if we use devres API
Yes it does - you do not really want to stop clocks in the middle of
servicing interrupt.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
