On Thu, 12 Feb 2015, Mathias Nyman wrote:

> On 25.01.2015 10:13, Sneeker Yeh wrote:
> > This issue is defined by a three-way race at disconnect, between
> > 1) Class driver interrupt endpoint resheduling attempts if the ISR gave an 
> > ep
> >    error event due to device detach (it would try 3 times)
> > 2) Disconnect interrupt on PORTSC_CSC, which is cleared by hub thread
> >    asynchronously
> > 3) The hardware IP was configured in silicon with
> >    - DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1
> >    - Synopsys IP version is < 3.00a
> > The IP will auto-suspend itself on device detach with some phy-specific 
> > interval
> > after CSC is cleared by 2)
> > 
> > If 2) and 3) complete before 1), the interrupts it expects will not be 
> > generated
> > by the autosuspended IP, leading to a deadlock. Even later disconnection
> > procedure would detect that corresponding urb is still in-progress and 
> > issue a
> > ep stop command, auto-suspended IP still won't respond to that command.

If the Synopsys IP provides a way to do it, it would be better to turn
off the autosuspend feature entirely.  Doesn't autosuspend violate the
xHCI specification?

> So did I understand correctly that the class driver submits a new urb which
> is enqueued by xhci_urb_enqueue() before the hub thread notices the device is 
> disconnected.
> Then hub thread clears CSC bit, controller suspends and the new urb is never 
> given back?
> 
> Doesn't the CSC bit and PORT_CONNECT bit show the device is disconnected when 
> we enter
> xhci_enqueue_urb(), even it the hub thread doesn't know this yet?

What if the device disconnects _after_ the new URB is enqueued?

> Would it make sense to check those bits in xhci_enqueue_urb, and just return 
> error
> in the xhci_urb_enqueue() if device is not connected? Then there wouldn't be 
> a need for any quirk
> at all.

That wouldn't help URBs that were already enqueued when the disconnect 
occurred.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to