On Thu, Jan 29, 2015 at 05:51:06PM -0800, Bjorn Andersson wrote:
> Add the regulator subnodes to the Qualcomm RPM MFD device tree bindings.
>
> Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
> ---
> #include <dt-bindings/mfd/qcom-rpm.h>
> @@ -66,5 +237,18 @@ frequencies.
>
> #address-cells = <1>;
> #size-cells = <0>;
> +
> + pm8921_smps1: pm8921-smps1 {
> + compatible = "qcom,rpm-pm8921-smps";
> + reg = <QCOM_RPM_PM8921_SMPS1>;
> +
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + regulator-always-on;
> +
> + bias-pull-down;
> +
> + qcom,switch-mode-frequency = <3200000>;
> + };
> };
My only comment here is that most (all but one) of the other mfd regulator
devices use regulators {}. Still wonder if that's what we should do.
Otherwise,
Reviewed-by: Andy Gross <agr...@codeaurora.org>
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
