Reviewed-by: Ray Jui <r...@broadcom.com>
Reviewed-by: Scott Branden <sbran...@broadcom.com>
Signed-off-by: Arun Ramamurthy <arun.ramamur...@broadcom.com>
---
.../bindings/phy/brcm,cygnus-usb-phy.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
new file mode 100644
index 0000000..f218fae
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
@@ -0,0 +1,50 @@
+BROADCOM CYGNUS USB PHY
+
+Required Properties:
+ - compatible: brcm,cygnus-usb-phy
+ - reg : usbphy_regs - Base address of phy registers
+ usb2h_idm_regs - Base address of host idm registers
+ usb2d_idm_regs - Base address of device idm registers
+ - num_phys : Number of phys available
+ - #phy-cells must be 2
+The node that uses the phy must provide two integers, the first indicates the
+port and the second indicates whether its host or device. The second integer
+is 0 for device and 1 for host
+
+NOTE: port 0 and port 1 are host only and port 2 can be configured for host or
device.
+
+Example of phy :
+ usbphy0: usbphy@0x0301c000 {
+ #phy-cells = <2>;
+ num_phys = <3>;
+ compatible = "brcm,cygnus-usb-phy";
+ reg = <0x0301c000 0x2000>,
+ <0x18115000 0x1000>,
+ <0x18111000 0x1000>;
+ status = "okay";
+ };
+
+Example of node using the phy:
+
+ /* This nodes declares port 0
+ and port 1 as host*/
+
+ ehci0: usb@0x18048000 {
+ compatible = "generic-ehci";
+ reg = <0x18048000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0 0 1 &usbphy0 1>;
+ phy-names = "usbp0","usbp1";
+ status = "okay";
+ };
+
+ /* This node declares port 2 phy
+ and configures it for device */
+
+ usbd_udc_dwc1: usbd_udc_dwc@0x1804c000 {
+ compatible = "iproc-udc";
+ reg = <0x1804c000 0x2000>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0 2 0>;
+ phy-names = "usb";
+ };
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
