From: Gyungoh Yoo <jack....@skyworksinc.com>

Signed-off-by: Gyungoh Yoo <jack....@skyworksinc.com>
Acked-by: Bryan Wu <coolo...@gmail.com>
---
Changes v11:
Renamed 'skyworks,en-channels' property to led-sources.
Removed unused property 'skyworks,ovp-level'.

Changes v10:
Nothing

Changes v9:
Nothing

Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT

Changes v7:
Nothing

Changes v6:
Nothing

Changes v5:
Nothing

Changes v4:
Nothing

Changes v3:
Nothing

Changes v2:
Added reg attribute for I2C slave address

 .../video/backlight/sky81452-backlight.txt         | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt

diff --git 
a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt 
b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000..8bf2940
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible           : Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name                 : Name of backlight device. Default is 'lcd-backlight'.
+- gpios                        : GPIO to use to EN pin.
+                       See Documentation/devicetree/bindings/gpio/gpio.txt
+- led-sources          : List of enabled channels from 0 to 5.
+                       See Documentation/devicetree/bindings/leds/common.txt
+- skyworks,ignore-pwm  : Ignore both PWM input
+- skyworks,dpwm-mode   : Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift : Enable phase shift mode
+- skyworks,short-detection-threshold-volt
+                       : It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit-mA
+                       : It should be 2300mA or 2750mA.
+
+Example:
+
+       backlight {
+               compatible = "skyworks,sky81452-backlight";
+               name = "pwm-backlight";
+               led-sources = <0 1 2 5>;
+               skyworks,ignore-pwm;
+               skyworks,phase-shift;
+               skyworks,current-limit-mA = <2300>;
+       };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to