On 27 February 2015 at 06:58, Mike Turquette <mturque...@linaro.org> wrote:
> Quoting Vincent Yang (2015-02-05 18:10:49)
>> From: Jassi Brar <jaswinder.si...@linaro.org>
>>
>> The CRG11 clock controller is managed by remote f/w.
>> This driver simply maps Linux CLK ops onto mailbox api.
>>
>> Signed-off-by: Jassi Brar <jaswinder.si...@linaro.org>
>> Signed-off-by: Andy Green <andy.gr...@linaro.org>
>> Signed-off-by: Vincent Yang <vincent.y...@tw.fujitsu.com>
>> Signed-off-by: Tetsuya Nuriya <nuriya.tets...@jp.fujitsu.com>
>> ---
>> .../bindings/clock/fujitsu,mb86s70-crg11.txt | 26 ++
>> drivers/clk/Makefile | 1 +
>> drivers/clk/clk-mb86s7x.c | 386
>> +++++++++++++++++++++
>> 3 files changed, 413 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
>> create mode 100644 drivers/clk/clk-mb86s7x.c
>>
>> diff --git
>> a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
>> b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
>> new file mode 100644
>> index 0000000..3323962
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
>> @@ -0,0 +1,26 @@
>> +Fujitsu CRG11 clock driver bindings
>> +-----------------------------------
>> +
>> +Required properties :
>> +- compatible : Shall contain "fujitsu,mb86s70-crg11"
>> +- #clock-cells : Shall be 3 {cntrlr domain port}
>> +
>> +The consumer specifies the desired clock pointing to its phandle.
>> +
>> +Example:
>> +
>> + clock: crg11 {
>> + compatible = "fujitsu,mb86s70-crg11";
>> + #clock-cells = <3>;
>> + };
>> +
>> + mhu: mhu0@2b1f0000 {
>> + #mbox-cells = <1>;
>> + compatible = "arm,mhu";
>> + reg = <0 0x2B1F0000 0x1000>;
>> + interrupts = <0 36 4>, /* LP Non-Sec */
>> + <0 35 4>, /* HP Non-Sec */
>> + <0 37 4>; /* Secure */
>> + clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
>
> Some preprocessor definitions would be better than hardcoding the values
> for Cntrlr, Domain and Port. The DT include chroot should help you
> here. Doing so will help you maintain this stuff into the future :-)
>
What macros do you have in mind? I was actually made to get rid of
macros in earlier version, but the implementation was different then.
I hope
#clock-cells : Shall be 3 {cntrlr domain port}
in the binding should be telling enough.
Thanks
jassi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
