From: VIET NGA DAO <vn...@altera.com>
Altera Quad SPI Controller is a soft IP which enables access to Altera EPCQ and
EPCS flash chips. This patch adds driver for these devices.
Signed-off-by: VIET NGA DAO <vn...@altera.com>
---
v3:
- Change altera_epcq driver name to altera_quadspi for more generic name
- Implement flash name searching in altera_quadspi.c instead of spi-nor
- Edit the altra quadspi info table in spi-nor
- Remove wait_til_ready in all read,write, erase, lock, unlock functions
- Merge .h and .c into 1 file
v2:
- Change to spi_nor structure
- Add lock and unlock functions for spi_nor
- Simplify the altera_epcq_lock function
- Replace reg by compatible in device tree
---
.../devicetree/bindings/mtd/altera_quadspi.txt | 45 ++
drivers/mtd/spi-nor/Kconfig | 8 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/altera_quadspi.c | 608 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 11 +
5 files changed, 673 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/altera_quadspi.txt
create mode 100644 drivers/mtd/spi-nor/altera_quadspi.c
diff --git a/Documentation/devicetree/bindings/mtd/altera_quadspi.txt
b/Documentation/devicetree/bindings/mtd/altera_quadspi.txt
new file mode 100644
index 0000000..f5bdd35
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/altera_quadspi.txt
@@ -0,0 +1,45 @@
+* MTD Altera QUADSPI driver
+
+Required properties:
+- compatible: Should be "altr,quadspi-1.0"
+- reg: Address and length of the register set for the device. It contains
+ the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+ "csr_base": Should contain the register configuration base address
+ "data_base": Should contain the data base address
+- is-epcs: boolean type.
+ If present, the device contains EPCS flashes.
+ Otherwise, it contains EPCQ flashes.
+- #address-cells: Must be <1>.
+- #size-cells: Must be <0>.
+- flash device tree subnode, there must be a node with the following fields:
+ - compatible: Should contain the flash name
+ - #address-cells: please refer to /mtd/partition.txt
+ - #size-cells: please refer to /mtd/partition.txt
+ For partitions inside each flash, please refer to /mtd/partition.txt
+
+Example:
+
+ quadspi_controller_0: quadspi@0x000000000 {
+ compatible = "altr,quadspi-1.0";
+ reg = <0x00000001 0x00000000 0x00000020>,
+ <0x00000000 0x00000000 0x02000000>;
+ reg-names = "csr_base", "data_base";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash0: epcq256@0 {
+ compatible = "epcq256-nonjedec";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ /* 16 MB for raw data. */
+ label = "EPCQ Flash 0 raw data";
+ reg = <0x0 0x1000000>;
+ };
+ partition@1000000 {
+ /* 16 MB for jffs2 data. */
+ label = "EPCQ Flash 0 JFFS 2";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ }; //end quadspi@0x000000000 (quadspi_controller_0)
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 64a4f0e..b9eed6d 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -28,4 +28,12 @@ config SPI_FSL_QUADSPI
This enables support for the Quad SPI controller in master mode.
We only connect the NOR to this controller now.
+config SPI_ALTERA_QUADSPI
+ tristate "Support Altera EPCQ/EPCS Flash chips"
+ depends on OF
+ help
+ This enables access to Altera EPCQ/EPCS flash chips, used for data
+ storage. See the driver source for the current list,
+ or to add other chips.
+
endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 6a7ce14..1a36a72 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
+obj-$(CONFIG_SPI_ALTERA_QUADSPI) += altera_quadspi.o
diff --git a/drivers/mtd/spi-nor/altera_quadspi.c
b/drivers/mtd/spi-nor/altera_quadspi.c
new file mode 100644
index 0000000..1d178d9
--- /dev/null
+++ b/drivers/mtd/spi-nor/altera_quadspi.c
@@ -0,0 +1,608 @@
+/*
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#define ALTERA_QUADSPI_RESOURCE_NAME "altera_quadspi"
+
+/* max possible slots for serial flash chip in the QUADSPI controller */
+#define MAX_NUM_FLASH_CHIP 3
+#define EPCS_OPCODE_ID 1
+#define EPCQ_OPCODE_ID 2
+#define WRITE_CHECK 1
+#define ERASE_CHECK 0
+
+/* Define max times to check status register before we give up. */
+#define QUADSPI_MAX_TIME_OUT (40 * HZ)
+
+/* defines for status register */
+#define QUADSPI_SR_REG 0x0
+#define QUADSPI_SR_WIP_MASK 0x00000001
+#define QUADSPI_SR_WIP 0x1
+#define QUADSPI_SR_WEL 0x2
+#define QUADSPI_SR_BP0 0x4
+#define QUADSPI_SR_BP1 0x8
+#define QUADSPI_SR_BP2 0x10
+#define QUADSPI_SR_BP3 0x40
+#define QUADSPI_SR_TB 0x20
+#define QUADSPI_SR_MASK 0x0000000F
+
+/* defines for device id register */
+#define QUADSPI_SID_REG 0x4
+#define QUADSPI_RDID_REG 0x8
+#define QUADSPI_ID_MASK 0x000000FF
+
+/*
+ * QUADSPI_MEM_OP register offset
+ *
+ * The QUADSPI_MEM_OP register is used to do memory protect and erase
operations
+ *
+ */
+#define QUADSPI_MEM_OP_REG 0xC
+
+#define QUADSPI_MEM_OP_CMD_MASK 0x00000003
+#define QUADSPI_MEM_OP_BULK_ERASE_CMD 0x00000001
+#define QUADSPI_MEM_OP_SECTOR_ERASE_CMD 0x00000002
+#define QUADSPI_MEM_OP_SECTOR_PROTECT_CMD 0x00000003
+#define QUADSPI_MEM_OP_SECTOR_VALUE_MASK 0x0003FF00
+#define QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK 0x00001F00
+#define QUADSPI_MEM_OP_SECTOR_PROTECT_SHIFT 8
+/*
+ * QUADSPI_ISR register offset
+ *
+ * The QUADSPI_ISR register is used to determine whether an invalid write or
+ * erase operation trigerred an interrupt
+ *
+ */
+#define QUADSPI_ISR_REG 0x10
+
+#define QUADSPI_ISR_ILLEGAL_ERASE_MASK 0x00000001
+#define QUADSPI_ISR_ILLEGAL_WRITE_MASK 0x00000002
+
+/*
+ * QUADSPI_IMR register offset
+ *
+ * The QUADSPI_IMR register is used to mask the invalid erase or the invalid
+ * write interrupts.
+ *
+ */
+#define QUADSPI_IMR_REG 0x14
+#define QUADSPI_IMR_ILLEGAL_ERASE_MASK 0x00000001
+
+#define QUADSPI_IMR_ILLEGAL_WRITE_MASK 0x00000002
+
+#define QUADSPI_CHIP_SELECT_REG 0x18
+#define QUADSPI_CHIP_SELECT_MASK 0x00000007
+#define QUADSPI_CHIP_SELECT_0 0x00000001
+#define QUADSPI_CHIP_SELECT_1 0x00000002
+#define QUADSPI_CHIP_SELECT_2 0x00000004
+
+struct altera_quadspi_plat {
+ void __iomem *csr_base;
+ void __iomem *data_base;
+ bool is_epcs;
+ u32 num_flashes;
+ struct device_node *np[MAX_NUM_FLASH_CHIP];
+};
+
+struct altera_quadspi {
+ struct clk *clk;
+ bool is_epcs;
+ void __iomem *csr_base;
+ void __iomem *data_base;
+ u32 num_flashes;
+ struct altera_quadspi_flash *flash[MAX_NUM_FLASH_CHIP];
+};
+
+struct altera_quadspi_flash {
+ struct mtd_info mtd;
+ struct spi_nor nor;
+ void *priv;
+};
+
+struct flash_device {
+ char *name;
+ u8 opcode_id;
+ u32 device_id;
+};
+
+#define FLASH_ID(_n, _opcode_id, _id) \
+{ \
+ .name = (_n), \
+ .opcode_id = (_opcode_id), \
+ .device_id = (_id), \
+}
+
+static struct flash_device flash_devices[] = {
+ FLASH_ID("epcq16-nonjedec", 2, 0x15),
+ FLASH_ID("epcq32-nonjedec", 2, 0x16),
+ FLASH_ID("epcq64-nonjedec", 2, 0x17),
+ FLASH_ID("epcq128-nonjedec", 2, 0x18),
+ FLASH_ID("epcq256-nonjedec", 2, 0x19),
+ FLASH_ID("epcq512-nonjedec", 2, 0x20),
+
+ FLASH_ID("epcs16-nonjedec", 1, 0x14),
+ FLASH_ID("epcs64-nonjedec", 1, 0x16),
+ FLASH_ID("epcs128-nonjedec", 1, 0x18),
+};
+
+static int altera_quadspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *val,
+ int len, int wr_en)
+{
+ return 0;
+}
+
+static int altera_quadspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *val,
+ int len)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ u32 data = 0;
+
+ switch (opcode) {
+ case SPINOR_OP_RDSR:
+ data = readl(dev->csr_base + QUADSPI_SR_REG);
+ *val = (u8)data & QUADSPI_SR_MASK;
+ break;
+ case SPINOR_OP_RDID:
+ /* opcode id */
+ if (dev->is_epcs)
+ data = readl(dev->csr_base + QUADSPI_SID_REG);
+ else
+ data = readl(dev->csr_base + QUADSPI_RDID_REG);
+
+ *val = (u8)data & QUADSPI_ID_MASK; /* device id */
+ break;
+ default:
+ *val = 0;
+ break;
+ }
+ return 0;
+}
+
+static int altera_quadspi_write_erase_check(struct spi_nor *nor,
+ bool write_erase)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ u32 val;
+ u32 mask;
+
+ if (write_erase)
+ mask = QUADSPI_ISR_ILLEGAL_WRITE_MASK;
+ else
+ mask = QUADSPI_ISR_ILLEGAL_ERASE_MASK;
+
+ val = readl(dev->csr_base + QUADSPI_ISR_REG);
+ if (val & mask) {
+ dev_err(nor->dev,
+ "write/erase failed, sector might be protected\n");
+ /* clear this status for next use */
+ writel(val, dev->csr_base + QUADSPI_ISR_REG);
+ return -EIO;
+ }
+ return 0;
+}
+
+static int altera_quadspi_addr_to_sector(struct mtd_info *mtd, int offset)
+{
+ if (mtd->erasesize_shift)
+ return offset >> mtd->erasesize_shift;
+ do_div(offset, mtd->erasesize);
+ return offset;
+}
+
+static int altera_quadspi_erase(struct spi_nor *nor, loff_t offset)
+{
+
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ struct mtd_info *mtd = &flash->mtd;
+ u32 val;
+ int ret;
+ int sector_value;
+
+ sector_value = altera_quadspi_addr_to_sector(mtd, offset);
+ /* sanity check that block_offset is a valid sector number */
+ if (sector_value < 0)
+ return -EINVAL;
+
+ /* sector value should occupy bits 17:8 */
+ val = (sector_value << 8) & QUADSPI_MEM_OP_SECTOR_VALUE_MASK;
+
+ /* sector erase commands occupies lower 2 bits */
+ val |= QUADSPI_MEM_OP_SECTOR_ERASE_CMD;
+
+ /* write sector erase command to QUADSPI_MEM_OP register */
+ writel(val, dev->csr_base + QUADSPI_MEM_OP_REG);
+
+ ret = altera_quadspi_write_erase_check(nor, ERASE_CHECK);
+ if (ret < 0) {
+ dev_err(nor->dev, "illegal erase\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int altera_quadspi_read(struct spi_nor *nor, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+
+ memcpy_fromio(buf, dev->data_base + from, len);
+ *retlen = len;
+
+ return 0;
+}
+
+static void altera_quadspi_write(struct spi_nor *nor, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ int ret = 0;
+
+ memcpy_toio(dev->data_base + to, buf, len);
+ *retlen += len;
+
+ /*
+ * check whether write triggered a illegal write interrupt
+ */
+
+ ret = altera_quadspi_write_erase_check(nor, WRITE_CHECK);
+ if (ret < 0)
+ dev_err(nor->dev, "illegal write\n");
+
+
+}
+
+static int altera_quadspi_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ struct mtd_info *mtd = &flash->mtd;
+ uint32_t offset = ofs;
+ u32 sector_start, sector_end;
+ u32 num_sectors;
+ u32 mem_op;
+ u32 sr_bp;
+ u32 sr_tb;
+
+ sector_start = offset;
+ sector_end = altera_quadspi_addr_to_sector(mtd, offset + len);
+ num_sectors = mtd->size;
+ do_div(num_sectors, mtd->erasesize);
+
+ dev_dbg(nor->dev, "%s: sector start is %u,sector end is %u\n",
+ __func__, sector_start, sector_end);
+
+ if (sector_start >= num_sectors / 2) {
+ sr_bp = fls(num_sectors - 1 - sector_start) + 1;
+ sr_tb = 0;
+ } else if ((sector_end < num_sectors / 2) && ~dev->is_epcs) {
+ sr_bp = fls(sector_end) + 1;
+ sr_tb = 1;
+ } else {
+ sr_bp = 16;
+ sr_tb = 0;
+ }
+
+ mem_op = (sr_tb << 12) | (sr_bp << 8);
+ mem_op &= QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
+ mem_op |= QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
+ writel(mem_op, dev->csr_base + QUADSPI_MEM_OP_REG);
+
+ return 0;
+}
+
+static int altera_quadspi_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ u32 mem_op;
+
+ dev_dbg(nor->dev, "Unlock all protected area\n");
+ mem_op = 0;
+ mem_op &= QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
+ mem_op |= QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
+ writel(mem_op, dev->csr_base + QUADSPI_MEM_OP_REG);
+
+ return 0;
+}
+
+static void altera_quadspi_chip_select(struct altera_quadspi *dev, u32 bank)
+{
+ u32 val = 0;
+
+ switch (bank) {
+ case 0:
+ val = QUADSPI_CHIP_SELECT_0;
+ break;
+ case 1:
+ val = QUADSPI_CHIP_SELECT_1;
+ break;
+ case 2:
+ val = QUADSPI_CHIP_SELECT_2;
+ break;
+ default:
+ return;
+ }
+ writel(val, dev->csr_base + QUADSPI_CHIP_SELECT_REG);
+}
+
+
+static int altera_quadspi_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np,
+ struct altera_quadspi_plat *pdata)
+{
+ struct device_node *pp = NULL;
+ struct resource *quadspi_res;
+ int i = 0;
+
+ pdata->is_epcs = of_property_read_bool(np, "is-epcs");
+
+ quadspi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "csr_base");
+ pdata->csr_base = devm_ioremap_resource(&pdev->dev, quadspi_res);
+ if (IS_ERR(pdata->csr_base)) {
+ dev_err(&pdev->dev, "%s: ERROR: failed to map csr base\n",
+ __func__);
+ return PTR_ERR(pdata->csr_base);
+ }
+
+ quadspi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "data_base");
+ pdata->data_base = devm_ioremap_resource(&pdev->dev, quadspi_res);
+ if (IS_ERR(pdata->data_base)) {
+ dev_err(&pdev->dev, "%s: ERROR: failed to map data base\n",
+ __func__);
+ return PTR_ERR(pdata->data_base);
+ }
+
+ /* Fill structs for each subnode (flash device) */
+ for_each_available_child_of_node(np, pp) {
+ /* Read bank id from DT */
+ pdata->np[i] = pp;
+ i++;
+ }
+ pdata->num_flashes = i;
+ return 0;
+}
+
+static const char *get_flash_name(struct spi_nor *nor)
+{
+ struct altera_quadspi_flash *flash = nor->priv;
+ struct altera_quadspi *dev = flash->priv;
+ int index;
+ int ret;
+ u8 id = 0;
+ u8 opcode_id;
+
+ opcode_id = dev->is_epcs ? EPCS_OPCODE_ID : EPCQ_OPCODE_ID;
+ ret = nor->read_reg(nor, SPINOR_OP_RDID, &id, 1);
+ if (ret)
+ return NULL;
+ for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
+ if (flash_devices[index].device_id == id &&
+ flash_devices[index].opcode_id == opcode_id)
+ return flash_devices[index].name;
+ }
+
+ /* Memory chip is not listed and not supported */
+ return NULL;
+}
+
+static int altera_quadspi_setup_banks(struct platform_device *pdev,
+ u32 bank, struct device_node *np)
+{
+ struct altera_quadspi *dev = platform_get_drvdata(pdev);
+ struct mtd_part_parser_data ppdata = {};
+ struct altera_quadspi_flash *flash;
+ struct spi_nor *nor;
+ int ret = 0;
+ char modalias[40];
+ const char *flash_name;
+
+ altera_quadspi_chip_select(dev, bank);
+
+ if (bank > dev->num_flashes - 1)
+ return -EINVAL;
+
+ flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ dev->flash[bank] = flash;
+ nor = &flash->nor;
+ nor->mtd = &flash->mtd;
+ nor->dev = &pdev->dev;
+ nor->priv = flash;
+ flash->mtd.priv = nor;
+ flash->priv = dev;
+
+ /* spi nor framework*/
+ nor->read_reg = altera_quadspi_read_reg;
+ nor->write_reg = altera_quadspi_write_reg;
+ nor->read = altera_quadspi_read;
+ nor->write = altera_quadspi_write;
+ nor->erase = altera_quadspi_erase;
+ nor->flash_lock = altera_quadspi_lock;
+ nor->flash_unlock = altera_quadspi_unlock;
+
+ if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
+ return -EINVAL;
+
+ flash_name = get_flash_name(nor);
+ if (flash_name == NULL)
+ return -EINVAL;
+
+ if (strcmp(flash_name, modalias) != 0) {
+ dev_err(nor->dev,
+ "flash name %s mismatch with device tree %s\n",
+ flash_name, modalias);
+ return -EINVAL;
+ }
+ ret = spi_nor_scan(nor, flash_name, SPI_NOR_QUAD);
+ if (ret)
+ return ret;
+
+ ppdata.of_node = np;
+
+ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, NULL, 0);
+}
+
+static int altera_quadspi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct altera_quadspi_plat *pdata = NULL;
+ struct altera_quadspi *dev;
+ int ret = 0;
+ int i;
+
+ if (!np) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "no device found\n");
+ goto err;
+ }
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct altera_quadspi_plat),
+ GFP_KERNEL);
+
+ if (!pdata) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = altera_quadspi_probe_config_dt(pdev, np, pdata);
+ if (ret) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "probe fail\n");
+ goto err;
+ }
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev->is_epcs = pdata->is_epcs;
+ dev->csr_base = pdata->csr_base;
+ dev->data_base = pdata->data_base;
+
+ /* check number of flashes */
+ dev->num_flashes = pdata->num_flashes;
+ if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
+ dev_err(&pdev->dev, "exceeding max number of flashes\n");
+ dev->num_flashes = MAX_NUM_FLASH_CHIP;
+ }
+
+ /* check clock */
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ ret = PTR_ERR(dev->clk);
+ goto err;
+ }
+ ret = clk_prepare_enable(dev->clk);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, dev);
+
+ /* loop for each flash which is connected to quadspi */
+ for (i = 0; i < dev->num_flashes; i++) {
+ ret = altera_quadspi_setup_banks(pdev, i, pdata->np[i]);
+ if (ret) {
+ dev_err(&pdev->dev, "bank setup failed\n");
+ goto err_bank_setup;
+ }
+ }
+
+ return 0;
+
+err_bank_setup:
+ clk_disable_unprepare(dev->clk);
+err:
+ return ret;
+}
+
+static int altera_quadspi_remove(struct platform_device *pdev)
+{
+ struct altera_quadspi *dev;
+ struct altera_quadspi_flash *flash;
+ int ret, i;
+
+ dev = platform_get_drvdata(pdev);
+
+ /* clean up for all nor flash */
+ for (i = 0; i < dev->num_flashes; i++) {
+ flash = dev->flash[i];
+ if (!flash)
+ continue;
+
+ /* clean up mtd stuff */
+ ret = mtd_device_unregister(&flash->mtd);
+ if (ret)
+ dev_err(&pdev->dev, "error removing mtd\n");
+ }
+
+ clk_disable_unprepare(dev->clk);
+
+ return 0;
+}
+
+static const struct of_device_id altera_quadspi_id_table[] = {
+ { .compatible = "altr,quadspi-1.0" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, altera_quadspi_id_table);
+
+static struct platform_driver altera_quadspi_driver = {
+ .driver = {
+ .name = ALTERA_QUADSPI_RESOURCE_NAME,
+ .bus = &platform_bus_type,
+ .of_match_table = altera_quadspi_id_table,
+ },
+ .probe = altera_quadspi_probe,
+ .remove = altera_quadspi_remove,
+};
+module_platform_driver(altera_quadspi_driver);
+
+MODULE_AUTHOR("Viet Nga Dao <vn...@altera.com>");
+MODULE_DESCRIPTION("Altera QuadSPI Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 43bb552..ad0c274 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -683,6 +683,17 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE |
SPI_NOR_NO_FR) },
{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE |
SPI_NOR_NO_FR) },
{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE |
SPI_NOR_NO_FR) },
+
+ /* Altera EPCQ/EPCS Flashes */
+ { "epcq16-nonjedec", INFO(0, 0, 0x10000, 32, 0) },
+ { "epcq32-nonjedec", INFO(0, 0, 0x10000, 64, 0) },
+ { "epcq64-nonjedec", INFO(0, 0, 0x10000, 128, 0) },
+ { "epcq128-nonjedec", INFO(0, 0, 0x10000, 256, 0) },
+ { "epcq256-nonjedec", INFO(0, 0, 0x10000, 512, 0) },
+ { "epcq512-nonjedec", INFO(0, 0, 0x10000, 1024, 0) },
+ { "epcs16-nonjedec", INFO(0, 0, 0x10000, 32, 0) },
+ { "epcs64-nonjedec", INFO(0, 0, 0x10000, 128, 0) },
+ { "epcs128-nonjedec", INFO(0, 0, 0x40000, 256, 0) },
{ },
};
--
1.7.11.GIT
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
