W dniu 10.04.2015 o 22:18, Laurentiu Palcu pisze:
Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdf

Signed-off-by: Laurentiu Palcu <laurentiu.pa...@intel.com>

(...)

diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c
new file mode 100644
index 0000000..58b9af1
--- /dev/null
+++ b/drivers/power/bq24257_charger.c
@@ -0,0 +1,868 @@
+/*
+ * TI BQ24257 charger driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+#define BQ24257_REG_1                  0x00
+#define BQ24257_REG_2                  0x01
+#define BQ24257_REG_3                  0x02
+#define BQ24257_REG_4                  0x03
+#define BQ24257_REG_5                  0x04
+#define BQ24257_REG_6                  0x05
+#define BQ24257_REG_7                  0x06
+
+#define BQ24257_MANUFACTURER           "Texas Instruments"
+#define BQ24257_STAT_IRQ               "stat"
+#define BQ24257_PG_GPIO                        "pg"
+
+#define BQ24257_ILIM_SET_DELAY         1000    /* msec */
+
+enum bq24257_fields {
+       F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT,                       /* REG 1 */
+       F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE,  /* REG 2 */
+       F_VBAT, F_USB_DET,                                          /* REG 3 */
+       F_ICHG, F_ITERM,                                            /* REG 4 */
+       F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
+       F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_STAT,                    /* REG 6 */
+       F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM,             /* REG 7 */
+
+       F_MAX_FIELDS
+};
+
+/* initial field values, converted from uV/uA */
+struct bq24257_init_data {
+       u8 ichg;        /* charge current      */
+       u8 vbat;        /* regulation voltage  */
+       u8 iterm;       /* termination current */
+};
+
+struct bq24257_state {
+       u8 status;
+       u8 fault;
+       bool power_good;
+};
+
+struct bq24257_device {
+       struct i2c_client *client;
+       struct device *dev;
+       struct power_supply *charger;
+       struct power_supply_desc charger_desc;
+
+       struct regmap *rmap;
+       struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+       struct gpio_desc *pg;
+
+       struct delayed_work iilimit_setup_work;
+
+       struct bq24257_init_data init_data;
+       struct bq24257_state state;
+
+       struct mutex lock; /* protect state data */
+};
+
+static bool bq24257_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+       return true;

What is the benefit of such function always returning true?

(...)

+
+static enum power_supply_property bq24257_power_supply_props[] = {
+       POWER_SUPPLY_PROP_MANUFACTURER,
+       POWER_SUPPLY_PROP_STATUS,
+       POWER_SUPPLY_PROP_ONLINE,
+       POWER_SUPPLY_PROP_HEALTH,
+       POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+       POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+       POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+       POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+       POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static char *bq24257_charger_supplied_to[] = {
+       "main-battery",
+};
+
+static int bq24257_power_supply_init(struct bq24257_device *bq)
+{
+       struct power_supply_config psy_cfg = { .drv_data = bq, };
+       struct power_supply_desc *psy_desc = &bq->charger_desc;
+
+       psy_desc->name = "bq24257-charger";
+       psy_desc->type = POWER_SUPPLY_TYPE_USB;
+       psy_desc->properties = bq24257_power_supply_props;
+       psy_desc->num_properties = ARRAY_SIZE(bq24257_power_supply_props);
+       psy_desc->get_property = bq24257_power_supply_get_property;

You are not modifying the power_supply_desc so it can be made a static const variable (file scope).

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to