From: Michael Ring <[email protected]> The BananaPro uses uart4 for the default rx/tx pins on the 40 pins connector, so enable uart4.
Uart2 is also available at the bananapro io-pins, but like on the bananapi the primary function of the pins is to act as gpios, see: http://forum.lemaker.org/forum.php?mod=viewthread&tid=10852 Remove the uart2 node, people who want to use uart2 can do so with a devicetree-overlay. Signed-off-by: Michael Ring <[email protected]> [[email protected]: Remove uart2 node] Signed-off-by: Hans de Goede <[email protected]> --- Changes in v2: -Remove uart2 node instead of disabling it --- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 45e2a02..18fcc87 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -52,7 +52,7 @@ aliases { serial0 = &uart0; - serial1 = &uart2; + serial1 = &uart4; serial2 = &uart7; }; @@ -250,9 +250,9 @@ status = "okay"; }; -&uart2 { +&uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; -- 2.4.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
