For the clock to be used (e.g. get its rate through clk_get_rate)
it should be prepared and enabled first.
Also, while the clock is enabled the driver must hold a reference to it,
so let's remove the call to clk_put.
Reviewed-by: Andrew Bresticker <abres...@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.gar...@imgtec.com>
---
drivers/clocksource/mips-gic-timer.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/mips-gic-timer.c
b/drivers/clocksource/mips-gic-timer.c
index b81ed1a..913585d 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -158,8 +158,13 @@ static void __init gic_clocksource_of_init(struct
device_node *node)
clk = of_clk_get(node, 0);
if (!IS_ERR(clk)) {
+ if (clk_prepare_enable(clk) < 0) {
+ pr_err("GIC failed to enable clock\n");
+ clk_put(clk);
+ return;
+ }
+
gic_frequency = clk_get_rate(clk);
- clk_put(clk);
} else if (of_property_read_u32(node, "clock-frequency",
&gic_frequency)) {
pr_err("GIC frequency not specified.\n");
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
