GIC is designed to support two of trigger mechanisms - active level
high or edge rising. But in the gpio_keys driver, it tries to use both
edge rising and edge falling trigger. This patch fixes the gpio_keys
driver to request only the edge rising event when failed to configure the
interrupt.
Signed-off-by: Y Vo <y...@apm.com>
---
drivers/input/keyboard/gpio_keys.c | 20 +++++++++++++++++---
1 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/input/keyboard/gpio_keys.c
b/drivers/input/keyboard/gpio_keys.c
index ddf4045..7c3da2c 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -532,9 +532,23 @@ static int gpio_keys_setup_key(struct platform_device
*pdev,
error = devm_request_any_context_irq(&pdev->dev, bdata->irq,
isr, irqflags, desc, bdata);
if (error < 0) {
- dev_err(dev, "Unable to claim irq %d; error %d\n",
- bdata->irq, error);
- return error;
+ /*
+ * Attempt to request again with only rising edge trigger
+ */
+ if ((irqflags & (IRQ_TYPE_EDGE_RISING | IRQF_TRIGGER_FALLING)))
{
+ irqflags = IRQ_TYPE_EDGE_RISING;
+ error = devm_request_any_context_irq(&pdev->dev,
bdata->irq,
+ isr, irqflags,
desc, bdata);
+ if (error < 0) {
+ dev_err(dev, "Unable to claim irq %d; error
%d\n",
+ bdata->irq, error);
+ return error;
+ }
+ } else {
+ dev_err(dev, "Unable to claim irq %d; error %d\n",
+ bdata->irq, error);
+ return error;
+ }
}
return 0;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
