Hi Alexandre,
On 28/05/15 14:06, Alexandre Belloni wrote:
Hi,
On 16/05/2015 at 00:35:30 +0200, Philippe Reynes wrote :
Please always include a commit message.
Oh yes, sorry about that.
Signed-off-by: Philippe Reynes<trem...@gmail.com>
---
Documentation/devicetree/bindings/rtc/rtc-mxc.txt | 27 +++++++++++++++++++++
drivers/rtc/rtc-mxc.c | 22 ++++++++++++++++-
2 files changed, 48 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 0000000..5505493
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,27 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+ * one for the input reference
+ * one for the the SoC RTC
+- clock-names: should contain:
+ * "rtc" for the input reference clock
+ * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg =<0x10007000 0x1000>;
+ interrupts =<22>;
+ clocks =<&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "rtc, "ipg";
+ status = "disabled";
+};
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index e916a91..df6483d 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -16,6 +16,8 @@
#include<linux/interrupt.h>
#include<linux/platform_device.h>
#include<linux/clk.h>
+#include<linux/of.h>
+#include<linux/of_device.h>
#define RTC_INPUT_CLK_32768HZ (0x00<< 5)
#define RTC_INPUT_CLK_32000HZ (0x01<< 5)
@@ -98,6 +100,15 @@ static struct platform_device_id imx_rtc_devtype[] = {
};
MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+ { .compatible = "fsl,imx1-rtc", .data =&imx_rtc_devtype[IMX1_RTC] },
+ { .compatible = "fsl,imx21-rtc", .data =&imx_rtc_devtype[IMX21_RTC] },
Maybe you can use directly IMX1_RTC and IMX21_RTC which...
I've seen both "style" on the code. I may change the code to simply use IMX1_RTC
and IMX21_RTC.
- pdata->devtype = pdev->id_entry->driver_data;
+ of_id = of_match_device(imx_rtc_dt_ids,&pdev->dev);
+ if (of_id) {
+ struct platform_device_id *id_entry;
+
+ id_entry = (struct platform_device_id *)of_id->data;
+ pdata->devtype = id_entry->driver_data;
... also simplifies that part.
I'll do it in the next version of this patch.
+ } else
+ pdata->devtype = pdev->id_entry->driver_data;
Do you prefer that I wait the clock driver has move to drivers/clk/imx
(as requested by Shawn) before sending a v2 ?
Regards,
Philippe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
