On Fri, 2015-06-19 at 10:43 +0200, Michael van der Westhuizen wrote:
> The commit dd11444327ce ("spi: dw-spi: Convert 16bit accesses to
> 32bit
> accesses") changed all 16bit accesses in the DW_apb_ssi driver to
> 32bit.
> This, unfortunately, breaks data register access on picoXcell, where
> the
> DW IP needs data register accesses to be word accesses (all other
> accesses appear to be OK).
Thanks for the patch. My comments below.
>
> This change introduces a new master variable to allow interface
> drivers
> to specify that 16bit data transfer I/O is required. This change
> also
> introduces the ability to set this variable via device tree bindings
> in
> the MMIO interface driver.
>
> Before this change, on a picoXcell pc3x3:
> spi_master spi32766: interrupt_transfer: fifo overrun/underrun
> m25p80 spi32766.0: error -5 reading 9f
> m25p80: probe of spi32766.0 failed with error -5
>
> After this change:
> m25p80 spi32766.0: m25p40 (512 Kbytes)
>
Please, add Fixes: tag as well.
> Signed-off-by: Michael van der Westhuizen <mich...@smart-africa.com>
> ---
> drivers/spi/spi-dw-mmio.c | 5 +++++
> drivers/spi/spi-dw.c | 13 +++++++++++--
> drivers/spi/spi-dw.h | 11 +++++++++++
> 3 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
> index eb03e12..1397424 100644
> --- a/drivers/spi/spi-dw-mmio.c
> +++ b/drivers/spi/spi-dw-mmio.c
> @@ -74,6 +74,11 @@ static int dw_spi_mmio_probe(struct
> platform_device *pdev)
>
> dws->max_freq = clk_get_rate(dwsmmio->clk);
>
> + if (pdev->dev.of_node)
> + dws->data_io_16bit =
I don't like "flexibility" in the DeviceTree data base and thus I
would prefer to see what we already have in naming there, i.e.
reg-io-width = 2 or 4.
> + of_property_read_bool(pdev->dev.of_node,
> + "snps,data-io-16bit");
> +
> num_cs = 4;
>
> if (pdev->dev.of_node)
> diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
> index 8d67d03..862b001 100644
> --- a/drivers/spi/spi-dw.c
> +++ b/drivers/spi/spi-dw.c
> @@ -194,7 +194,12 @@ static void dw_writer(struct dw_spi *dws)
> else
> txw = *(u16 *)(dws->tx);
> }
> - dw_writel(dws, DW_SPI_DR, txw);
> +
> + if (dws->data_io_16bit)
> + dw_writew(dws, DW_SPI_DR, txw);
> + else
> + dw_writel(dws, DW_SPI_DR, txw);
> +
> dws->tx += dws->n_bytes;
> }
> }
> @@ -205,7 +210,11 @@ static void dw_reader(struct dw_spi *dws)
> u16 rxw;
>
> while (max--) {
> - rxw = dw_readl(dws, DW_SPI_DR);
> + if (dws->data_io_16bit)
> + rxw = dw_readw(dws, DW_SPI_DR);
> + else
> + rxw = dw_readl(dws, DW_SPI_DR);
> +
> /* Care rx only if the transfer's original "rx" is
> not null */
> if (dws->rx_end - dws->len) {
> if (dws->n_bytes == 1)
> diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
> index 6c91391..ced276a 100644
> --- a/drivers/spi/spi-dw.h
> +++ b/drivers/spi/spi-dw.h
> @@ -109,6 +109,7 @@ struct dw_spi {
> u32 fifo_len; /* depth of the FIFO
> buffer */
> u32 max_freq; /* max bus freq
> supported */
>
> + bool data_io_16bit; /* DR is only 16
> bits wide */
> u16 bus_num;
> u16 num_cs; /* supported
> slave numbers */
>
> @@ -145,11 +146,21 @@ static inline u32 dw_readl(struct dw_spi *dws,
> u32 offset)
> return __raw_readl(dws->regs + offset);
> }
>
> +static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
> +{
> + return __raw_readw(dws->regs + offset);
> +}
> +
> static inline void dw_writel(struct dw_spi *dws, u32 offset, u32
> val)
> {
> __raw_writel(val, dws->regs + offset);
> }
>
> +static inline void dw_writew(struct dw_spi *dws, u32 offset, u16
> val)
> +{
> + __raw_writew(val, dws->regs + offset);
> +}
> +
> static inline void spi_enable_chip(struct dw_spi *dws, int enable)
> {
> dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
Regarding to above comment what about something like
static inline u32 dw_read_reg(dws, offset)
{
switch (reg_io_width)
case 2:
return dw_readw();
case 4:
default:
return dw_readl();
}
--
Andy Shevchenko <andriy.shevche...@linux.intel.com>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
