> > + chosen {
> > + bootargs = "console=ttyS0,921600n8 earlyprintk";
>
> PLease get rid of bootargs here; earlyprintk doesn't do anything on
> arm64 (it's earlycon these days), and you can specify the serial
> configuration in stdout-path, so please use that instead.
>
Got it. Will remove bootargs & use stdout-path only.
> > + stdout-path = &uart0;
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> > new file mode 100644
> > index 0000000..832be20
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> > @@ -0,0 +1,164 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Mars.C <mars.ch...@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + compatible = "mediatek,mt6795";
> > + interrupt-parent = <&sysirq>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x000>;
> > + };
> > +
> > + cpu1: cpu@1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x001>;
> > + };
>
> No enable-method? Does your FW patch that in?
This patch only provides single core to boot.The proper enable-method
for SMP boot is under discussion in our site. Will complete
enable-method when providing our solution to SMP boot in the other patch
set.
>
> > +
> > + cpu2: cpu@2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x002>;
> > + };
> > +
> > + cpu3: cpu@3 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x003>;
> > + };
> > +
> > + cpu4: cpu@4 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x100>;
> > + };
>
> The unit-address should match the reg (e.g. this should be cpu@100).
Got it. Will fix this.
>
> > +
> > + cpu5: cpu@5 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x101>;
> > + };
> > +
> > + cpu6: cpu@6 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x102>;
> > + };
> > +
> > + cpu7: cpu@7 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x103>;
> > + };
> > + };
> > +
> > + clocks {
> > + system_clk: dummy13m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <13000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + rtc_clk: dummy32k {
> > + compatible = "fixed-clock";
> > + clock-frequency = <32000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + uart_clk: dummy26m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <26000000>;
> > + #clock-cells = <0>;
> > + };
> > + };
>
> Get rid of the clocks node and place these directly under the root node.
Got it. Will fix it.
>
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13
> > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14
> > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11
> > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10
> > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
>
> The mask is wrong.
They should be GIC_CPU_MASK_SIMPLE(8). Will fix these.
Thanks for your suggestions.
>
> Thanks,
> Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
