We're using capitalisation and removing the '-' to mitigate confusion.
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 892b366..23b4772 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -3,7 +3,7 @@ Bindings for the Generic PWM Regulator
Currently supports 2 modes of operation:
-voltage-table: When in this mode, a voltage table (See below) of
+Voltage Table: When in this mode, a voltage table (See below) of
predefined voltage <=> duty-cycle values must be
provided via DT. Limitations are that the regulator can
only operate at the voltages supplied in the table.
@@ -13,7 +13,7 @@ voltage-table: When in this mode, a voltage
table (See below) of
the user if the assumptions made in continuous-voltage
mode do not reign true.
-continuous-voltage: This mode uses the regulator's maximum and minimum
+Continuous Voltage: This mode uses the regulator's maximum and minimum
supplied voltages specified in the
regulator-{min,max}-microvolt properties to calculate
appropriate duty-cycle values. This allows for a much
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
